Synthesis and Properties of Gemini-type Cationic Surfactants Containing Carbonate Linkages in the Linker Moiety Directed Toward Green and Sustainable Chemistry

Gemini-type cationic surfactants containing carbonate linkages as biodegradable and chemically recyclable segments, consisting of two long-chain alkyl groups, two quaternary ammonium groups and a linker moiety, were designed and synthesized as novel green and sustainable cationics with improved physicochemical and biological activities. The gemini-type cationics containing a carbonate linkage showed lower critical micelle concentration values compared to the corresponding single-type cationics. Also, the gemini-type cationics containing a carbonate linkage in the linker moiety showed strong antimicrobial activities. The biodegradability of the gemini-type cationics was significantly improved when a carbonate linkage was introduced into the linker moiety. The maximum biochemical oxygen demand-biodegradability of the gemini-type cationics containing a carbonate linkage in the linker moiety exceeded 70% after a 28-day incubation. Furthermore, the gemini-type cationics containing both a carbonate linkage and an n-dodecyl group showed a chemical recyclability using a lipase (E.C. 3.1.1.3).

On-chip cell sorting system using laser-induced heating of a thermoreversible gelation polymer to control flow

We have developed a microfabricated fluorescence-activated cell sorter system using a thermoreversible gelation polymer (TGP) as a switching valve. The glass sorter chip has Y-shaped microchannels with one inlet and two outlets. A biological specimen containing fluorescently labeled cells is mixed with a solution containing a thermoreversible sol-gel polymer. The mixed solution is then introduced into the sorter chip through the inlet. The sol-gel transformation was locally induced by site-directed infrared laser irradiation to plug one of the outlets. The fluorescently labeled target cells were detected with sensitive fluorescence microscopy. In the absence of a fluorescence signal, the collection channel is plugged through laser irradiation of the TGP and the specimens are directed to the waste channel. Upon detection of a fluorescence signal from the target cells, the laser beam is then used to plug the waste channel, allowing the fluorescent cells to be channeled into the collection reservoir. The response time of the sol-gel transformation was 3 ms, and a flow switching time of 120 ms was achieved. Using this system, we have demonstrated the sorting of fluorescent microspheres and Escherichia coli cells expressing fluorescent proteins. These cells were found to be viable after extraction from the sorting system, indicating no damage to the cells.     

Novel Enantiocomplementary C2‐Symmetric Chiral Bis(imidazoline) Ligands: Highly Enantioselective Friedel–Crafts Alkylation of Indoles with Ethyl 3,3,3‐Trifluoropyruvate

Enantioselective Friedel–Crafts alkylations of a variety of indoles with ethyl 3,3,3‐trifluoropyruvate catalyzed by novel chiral m‐phenylenebis(imidazoline)‐copper(II) complexes or the bis(imidazoline)‐achiral acid combination afforded products with high enantioselectivity. Both enantiomers of indole derivatives can be prepared with high enantioselectivities by tuning the N‐substituents of the imidazoline.     

Development of Divertor Plasma Simulators with High Heat Flux Plasmas and its Application to Nuclear Fusion Study: A Review

This overview describes recent studies of nuclear fusion by using divertor plasma simulators generating high heat flux plasma. The experimental results regarding plasma-material interaction related to tungsten and carbon dusts, and detached recombining plasma are reviewed. © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

CoCl(2) inhibits neural differentiation of retinoic acid-treated embryoid bodies

The effects of CoCl(2) on retinoic acid (RA)-treated embryoid bodies (EBs) were investigated. Four-day EBs were treated with 5x10(-6) M of RA for 4 d, then subjected to attached culturing for 7 d in the presence of CoCl(2) at 0, 20, and 100 microM. Differentiation into MAP2- and GFAP-immunopositive cells was inhibited by CoCl(2) in a dose-dependent manner. Next, RA-treated EBs were dissociated into single cells and cultured for 7 d at an initial cell density of 1x10(3)/cm(2). The number of cells increased in a CoCl(2)-dose dependent fashion. In cultures with 100 microM of CoCl(2), more than 90% of the cells were immunopositive for nestin and nestin-immunopositive cells formed clusters, while there were few cells immunopositive for MAP2 or GFAP. These results suggest that CoCl(2) inhibits neural differentiation of RA-treated EB cells and promotes the proliferation of nestin-immunopositive cells, i.e., embryonic stem (ES)-derived neural stem-like cells.     

Functional analyses of neutrophil-like differentiated cell lines under a hyperglycemic condition

Diabetic patients are prone to severe bacterial infections. The functional alterations of neutrophils by hyperglycemia are thought to be partially responsible for such infections. In this study, we investigated the functional changes of neutrophil-like differentiated cell lines (dHL-60, dTHP-1, and dNB-4) by treatment with 5.5 mM, 11 mM, or 35 mM of glucose. In dHL-60 cells, the incubation with high glucose (35 mM) resulted in the enhancement of cell aggregation, the suppression of cellular fragility, the induction of reactive-oxygen species (ROS) production by phorbol myristate acetate (PMA) stimulation, and the impairment of phagocytosis. In dTHP-1 cells, the treatment with higher glucose generated the suppression of cellular fragility and extremely impaired phagocytosis (by 35 mM), and induced ROS production due to PMA stimulation (by 11 mM). Furthermore, the higher glucose exposure to dNB-4 cells enlarged intracellular vacuoles (by 35 mM) and induced ROS production due to PMA stimulation (by 11 mM). Since the ROS generation of those cells was enhanced only after PMA stimulation under the higher glucose conditions, glucose may have a priming effect rather than a triggering effect. These extraordinary sensitivities caused by the higher glucose treatments may reflect the dysfunction or overactivation of neutrophils.     

Preparation of nanocomposites by melt compounding polylactic acid/polyamide 12/organoclay at different screw rotating speeds using a twin screw extruder

This study analyzes the effect of different screw rotating speeds on the clay dispersion and mechanical properties of nanocomposites prepared by melt compounding polylactic acid (PLA) with an organoclay in a co‐rotating twin screw extruder. Polyamide 12 (PA12) was used as an additive. Two different screw rotating speeds, 65 rpm and 150 rpm, were used in this study. According to the tensile strength data, the Young's modulus of the PLA/clay nanocomposites showed improvement at a screw rotating speed of 150 rpm. The Young's modulus improved with the addition of the organoclay to PLA matrix, but decreased when PA12 was added to the PLA matrix. The tensile strengths and elongations become small by adding organoclay to PLA matrix. The tensile strengths of the PLA/organoclay nanocomposites increased for the higher screw rotating speed (150 rpm). The d‐spacing of PLA/PA12/Clay nanocomposites was independent of the addition of PA12. The size of the clay aggregates in the PLA/PA12/Clay nanocomposites is smaller than that of PLA/Clay. Furthermore, the thermal stability of the PLA/Clay nanocomposite increases with addition of PA12, while on the whole, it had little influence on the tensile properties. POLYM. COMPOS., 29:1–8, 2008. © 2007 Society of Plastics Engineers     

Physicochemical characteristics of rapidly dried onion powder and its anti-atherogenic effect on rats fed high-fat diet

Rapidly dried onion (Allium cepa L. cv. Momiji No. 3) powder (OP) prepared from the outer layers (from second to fourth scale leaves from the surface) of onion bulbs was analysed for its quercetin and polyuronide contents, the effects of enzymatic treatment and the anti-atherogenic effect on rats fed a high-fat diet. Quercetin 4′-glucoside (50%), free quercetin (30%) and quercetin 3,4′-diglucoside (20%) were identified as quercetin derivatives, and boiling-water extraction was effective in extracting these compounds. OP contained 12.9% of polyuronides, the basic skeleton of pectin. Enzymatic degradation (cellulase and pectinase, 50 °C for 12 h, pH 6.0) of OP was effective in obtaining a slurry of smaller particle sizes. The free quercetin increased and the glucosides decreased with enzyme treatment. In Wistar rats fed an OP-added high-fat diet, the total cholesterol, HDL-cholesterol and triglyceride concentrations were not significantly different from the rats fed a high-fat diet without OP. However, the atherogenic index (AI) of Wistar rats fed an OP-added high-fat diet was lower (AI = 3.3) than rats fed the diet without OP (AI = 4.1). The incremental elastic modulus (IEM) of the aorta from rats fed the OP-added diet was also significantly lower than that of the rats fed the diet without OP. The AI and IEM values of the rats fed the OP-added diet were quite similar to the values of rats fed the diet without OP but were allowed spontaneous exercise. These results suggest that OP intake is effective for decreasing the risk of arteriosclerosis.     

An FPGA implementation of hard‐wired sequence control system based on PLC software

Although a programmable logic controller (PLC) has been widely adopted for the sequence control of industrial machinery, its performance does not always satisfy the recent requirements in large and highly responsive systems. With the state‐of‐the‐art field programmable gate array (FPGA) technology, it is possible to implement a control program with hard‐wired logic for higher response and reduced implementation cost/space. This approach is also worthwhile for transmigration of legacy PLC software into forthcoming FPGA‐based control hardware. This study presents a systematic method to implement a hard‐wired sequence control from PLC software. PLC instructions are converted into VHDL codes, and then implemented as logic circuit with various peripheral functions. Productive PLC programs were examined with Mitsubishi Electric FX2N PLC and Altera Stratix II FPGA, and were shown to fit into a common FPGA chip. A straightforward Sequential design was estimated to be 184 times faster than PLC, while a performance‐oriented Flat design was estimated to be 44 times faster than Sequential design (i.e., 8050 times faster than PLC). A practical perfect layer winder system was actually built and successfully operated with our FPGA control board, whose logic design was implemented with our tools. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Development of lateral displacement sensor for real‐time detection of structural damage

We have developed a novel sensor that enables us to measure the relative story displacement of a building structure in real time. This lateral displacement sensor (LDS) is composed of a light‐emitting diode (LED) array, which is fixed on the ceiling, and a position‐sensitive detector (PSD) unit, which is placed on the floor. We optimized the LDS to achieve high accuracy in lateral displacement measurement. The accuracy was evaluated to be 60 µm by conducting shaking table tests. Two LDSs were implemented in an actual building equipped with an active variable stiffness (AVS) system, and the building was vibrated with seismic waveforms by an exciter placed on the rooftop. The seismic displacement of the second floor relative to the first floor was measured using the LDS. Furthermore, the inclination angle of the second floor could be measured using the LDS during the seismic vibration. Using the AVS system, we realized the residual displacement of the second floor without inducing damage to the building, and succeeded in real‐time residual displacement measurement for the first time. These results indicate that the LDS is useful for the health diagnosis of a building structure. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.