Gas Effusion Spectra of Fullerenes

Gas effusion spectra of fullerenes are studied. Three peaks of toluene are found in gas effusion spectra dp/dT-T. Two peaks of oxygen are found in gas effusion spectra dN/dt-T of samples kept in the air after annealing to avoid the toluene. These phenomena confirmed to be reversible are discussed by treating fullerenes as intercalated materials.     

First-principles calculation of phase equilibria and phase separation of the Fe-Ni alloy system

Theoretical investigation of the phase equilibria of the Fe-Ni alloy has been performed by combining the FLAPW total energy calculations and the Cluster Variation Method through the Cluster Expansion Method. The calculations have proved the stabilization of the LIE phase at 1：3 stoichiometry, which is in agreement with the experimental result, and predicted the existence of L1 0 as a stable phase below 550 K; this L1 0 phase has been missing in the conventional phase diagram. The calculations are extended to the Fe-rich region that is characterized by a wide range phase separation and has drawn considerable attention because of the intriguing Invar property associated with a Fe concentration of 65%. To reveal the origin of the phase separation, a P-V curve in an entire concentration range is derived by the second derivative of free energy functional of the disordered phase with respect to the volume. The calculation confirmed that the phase separation is caused by the breakdown of the mechanical-stability criterion. The newly calculated phase separation line combined with the L1 0 and L12Eorder-disordered phase boundaries provides phase equilibria in the wider concentration range of the system. Furthermore, a coefficient of thermal expansion （CTE） is attempted by incorporating the thermal vibration effect through harmonic approximation of the Debye-Gruneisen model. The Invar behavior has been reproduced, and the origin of this anomalous volume change has been discussed.     

Development of a frequency-detuned interferometer as a prototype experiment for next-generation gravitational-wave detectors

We report on our prototype experiment that uses a 4-m detuned resonant sideband extraction interferometer with suspended mirrors, which has almost the same configuration as the next-generation, gravitational-wave detectors. We have developed a new control scheme and have succeeded in the operation of such an interferometer with suspended mirrors for the first time ever as far as we know. We believe that this is the first such instrument that can see the radiation pressure signal enhancement, which can improve the sensitivity of next-generation gravitational-wave detectors.     

Excess micromotion compensation of trapped ions in a linear Paul trap for trace isotope analysis

Excess micromotion of trapped calcium ions was detected and compensated in our linear Paul trap apparatus for trace isotope analysis. The micromotion was detected by Charge-coupled device (CCD). camera and radio frequency (rf) correlation method. We found that 230 and 2280 V of compensation voltages were needed for x- and y-axis compensation in our apparatus, respectively. The z-axis micromotion was confirmed by the experiment and its cause was investigated by finding a shape of z-axis confinement field. The confinement field was indeed distorted in our apparatus and it gave rise to the trapped ion to shift from potential center. And the micromotion of r-direction was transferred to the z-axis by the distorted confinement field. The z-axis micromotion was suppressed by increasing cap voltage of trap.     

Survey of actual viewing conditions at home and appropriate luminance of LCD‐TV screens

Abstract— To understand actual viewing conditions at home is important for TV design. And the preferred luminance level of LCD TVs under actual viewing conditions is also important in order to obtain both good picture quality and low power consumption. The actual viewing conditions of households and the preferred luminance levels was investigated. In a field test of 83 households, the display luminance, screen illuminance, and viewing locations were measured on site. In laboratory experiments, young and elderly subjects adjusted the luminance of an LCD‐TV screen to their preferred levels under different screen illuminance levels, angular screen sizes, and average luminance levels (ALL) of the images. As a result, two equations, which represent the preferred luminance level of LCD‐TV screens corresponding to different viewing conditions for young and elderly subjects were obtained. When the ALL of the images was 25% and the screen illuminance and angular screen size were set at 100 lx and 20°, respectively, the preferred luminance was 1 60 cd/m² for the young subjects and 248 cd/m² for the elderly subjects. By using the setting of the preferred luminance of an LCD TV under actual viewing conditions, it is possible to conserve energy consumption.     

V–I characteristics of solid polymer electrolytic (SPE) dehumidifier

Measurements of the V–I characteristics of a solid polymer electrolytic (SPE) dehumidifier were done using a modified SPE dehumidifier with four electrodes which included two electrodes to carry the main current and the other two electrodes to measure the voltages applied to the electrical double layer, which are the boundary voltages between the electrodes and the SPE membrane. The measured results were analyzed using the Butler-Volmer equation to examine the validity of the measurements. The current flowing in the dehumidifier is produced by the decomposition of water near the anode. Therefore, under a steady-state condition, the current should be proportional to the supply rate of water to the anode. On the other hand, a two-layer model for the SPE dehumidifier presented in our previous article showed that the current flowing in the dehumidifier was roughly proportional to the water content in the vicinity of the anode. These results were introduced for interpretation of the V–I measurements of the SPE dehumidifier. It was concluded that the dehumidifier current was expressed in the form of a Butler-Volmer equation as a function of the electrode boundary voltages which were the voltages across the boundary between the electrodes and the SPE membrane. An experimental formula for the current under a steady-state condition was developed as a function of the water content near the anode and the boundary voltages.     

Modification of tribological performance of DLC films by means of some elements addition

The elements added diamond-like carbon films (hydrogen, fluorine, and sulfur) fabricated from C₂H₂:H₂, C₂H₂:CF₄ and C₂H₂:SF₆ mixtures were used to compare and study the effects of element contents on the deposition and tribological properties of films prepared by plasma-based ion implantation (PBII). The structure of the films was analyzed by Raman spectroscopy. Hardness and elastic modulus of films were measured by nano-indentation hardness testing. Contact angle and surface energy of films were measured by contact angle measurement. Tribological characteristics of films were performed using a ball-on-disk friction tester. The results indicate that with the increasing element contents, the hardness and elastic modulus, and surface energy of all films decreases, while the surface angle tends to increase. Additionally, H-DLC films at C:H flow rate ratio of 1:4 shows a friction coefficient of 0.08 under ambient air, which are considerable improvement in the tribological properties. This is due to the formation of a transfer films on the interface and high hydrogen contents. For F-DLC films and S-DLC films, does not show a significant decrease in the friction coefficient with the fluorine and sulfur contents under ambient air. The decrease in the friction coefficient is greater under high vacuum than under ambient air.     

Power characteristics of unsteadily forward–reverse rotating impellers in an unbaffled aerated agitated vessel

Power characteristics of an unbaffled aerated agitated vessel with unsteadily forward‐reverse rotating impellers, ie a new type of gas–liquid agitator named ‘AJITER’, treating viscous Newtonian liquids were studied experimentally. Measurements were first made on the agitation torque, ie the torque on the drive shaft on which forward–reverse rotating impellers with four delta‐type blades were attached, and the data obtained were analyzed by fitting them to an equation consisting of two terms with respect to the resistance of the fluid, one due to viscous drag and the other due to added moment of inertia. The effects of operating conditions and physical properties of liquids on the drag and added moment of inertia coefficients were then evaluated, and empirical relationships which estimate values of these coefficients, useful to predict the unsteady behavior and magnitude of agitation torque, were presented. Furthermore, equations were developed for estimating the average and maximum power consumptions as a function of the drag and added moment of inertia coefficients. Prediction of respective power levels in AJITER by these equations was also discussed. © 2001 Society of Chemical Industry     

A SHORT-CUT METHOD FOR DETERMINING CONCENTRATION DEPENDENT DIFFUSIVITY IN LIQUID FOODS AND POLYMER SOLUTIONS FROM REGULAR REGIME DRYING CURVES

A simple method for determining concentration (water or solvent content) dependent diffusivity in liquid foods and polymer solutions from the regular regime drying curve was developed on the basis of the power-law diffusion model. The method was first tested to the drying data generated from numerical solutions of the diffusion equation with various types of concentration dependent diffusivities. The present method was found to be very simple yet accurate compared with the previous methods. Then, the drying rates of various sugar solutions experimentally obtained were analyzed on the basis of the present method to determine the moisture content dependent diffusivities.     

Cat carotid body chemosensory discharge (in vitro) is insensitive to charybdotoxin

Charybdotoxin (ChTX), a venom protein, suppresses Ca2+-activated K+ (K+(Ca)) currents in the glomus cell of neonatal rat carotid body. If it works similarly for cat carotid body chemoreceptors, charybdotoxin is expected to stimulate the chemosensory discharge during normoxia, and particularly hypoxia and hypercapnia. We studied the effects of charybdotoxin (20-40 nM) in vitro (perfused/superfused) on the cat carotid chemosensory discharge, and simultaneously tissue PO2 (PtiO2), as a measure of positive control. ChTX (20 nM) only increased PtiO2 and decreased carotid chemosensory discharge during hypoxia, indicating vasodilation. We conclude that K+(Ca) channels do not appear to play a significant role in chemotransduction in the cat carotid body.