Breadmaking Properties of Triticale Flour with Wheat Flour and Relationship to Amylase Activity

Wheat flour was blended with triticale flour and baking tests were performed. When 18.3% of triticale flour was blended with wheat flour, the greatest bread height (mm) and specific volume (cm³/g) were obtained. Triticale flour was fractionated into water solubles, gluten, prime starch, and tailings by acetic acid (pH 3.5) fractionation. Baking results indicated that only the water solubles fraction produced the same baking performance as the original triticale flour. Several types of triticale flour were blended with wheat flours, and the breadmaking tests and measurement of amylase activities were compared. Baking results appeared to be related to a-amylase activity of triticale flour.     

Cavitation erosion resistance of stellite alloy weld overlays

Stellite alloys have excellent cavitation erosion resistance and are often used for liquid machinery, but the erosion properties of various stellite alloys have not been evaluated by a standard method. In this study, we evaluate the erosion resistance for various stellite alloy weld overlays of ST6 and ST21 in a vibrating method and in a cavitating liquid jet method. The grain size of the Co matrix affects the cavitation erosion resistance of stellite alloy weld overlays of ST6. The erosion rate of the maximum rate stage of stellite weld overlay alloys of ST6-1, ST6-2 and ST6-3 were found to be about 1/13 to 1/7 times that of SUS304. Moreover, we clarified the cavitation erosion mechanism of SUS304 and ST6 by scanning electron microscopy. Furthermore, by comparing the erosion behavior in a cavitating liquid jet method with that in a vibratory method, it was found that the erosion rate of the cavitating jet method and the vibratory method have a good correlation.     

Thermal inactivation of immobilized lipase in 1-alcohols

The thermal inactivation of immobilized lipase from Candida antarctica in 1-alcohols with four to eight carbons at various temperatures could be well expressed using a model in which heterogeneity in the susceptibility of the enzyme to the inactivation was assumed. It was found that the enthalpy-entropy compensation held for inactivation in 1-alcohols.     

Increased remineralization of tooth enamel by milk containing added casein phosphopeptide-amorphous calcium phosphate

Casein phosphopeptide amorphous calcium phosphate nano-complexes (CPP-ACP) in chewing gum, lozenges and mouthrinses have been shown to re-mineralize enamel subsurface lesions in human in situ experiments. The aim of this double-blind, randomized clinical study was to investigate the capacity of CPP-ACP added to bovine milk to re-mineralize enamel subsurface lesions in situ. Ten subjects drank milk containing either 2.0 or 5.0 g CPP-ACP/l or a control milk whilst wearing removable appliances with enamel slabs containing subsurface demineralized lesions. Each 200 ml milk sample was consumed once a day for each weekday over three consecutive weeks. After each treatment and one weeks rest the subjects crossed over to the other treatments. At the completion of the treatments the enamel slabs were removed and remineralization determined using microradiography and microdensitometry. The results demonstrated that all three milk samples re-mineralized enamel subsurface lesions. However, the milk samples containing CPP-ACP produced significantly greater remineralization than the control milk. The re-mineralizing effect of CPP-ACP in milk was dose-dependent with 2.0 and 5.0 g CPP-ACP/l producing an increase in mineral content of 70 and 148%, respectively, relative to the control milk. The differences in remineralization following exposure to the three milk samples were all statistically significant (P<0.001). In conclusion, this study shows that the addition of 2.0-5.0 g CPP-ACP/l to milk substantially increases its ability to re-mineralize enamel subsurface lesions.     

Photo-induced properties of anodic oxide films on Ti6Al4V

Photocatalytic activity and wettability of the anodic oxide layer on Ti6Al4V prepared by anodization in a sulfuric acid electrolyte are explored. The oxide is composed mainly of TiO₂ with V₂O₅, VO₂ and Al₂O₃. The crystal structure of the TiO₂ varies from anatase to rutile with the sulfuric acid concentration in the electrolyte. Anatase exhibits better photocatalytic activity compared with rutile, which is different from those on Ti and Ti-Nb-Sn alloy. Contact angles of the oxides decrease with ultraviolet light illumination, and hydrophilicity is observed in the rutile oxide. Both photocatalytic activity and hydrophilicity are inferior to the corresponding Ti and Ti-Nb-Sn alloy, which is explained by the presence of Al₂O₃ in the anodic oxide.     

Fabrication of Ni compound nanocrystal/nanocarbon composites by cooling of chloride-based fluxes

Unique Ni compound nanocrystals were successfully grown on carbon nanotubes (CNTs) by cooling a mixed chloride flux. Cup-stacked CNTs (CSCNTs) were used as the nanocarbon materials because of their structural features. The grown nanocrystals had a nanosheet structure, which was densely assembled and had a ribbon-like morphology. Therefore, the nanocrystal/CSCNT composites were expected to have a highly active surface area for the catalyst composites. The selected area electron diffraction pattern and the related radial intensity profiles indicated that the grown nanocrystals were Ni(OH)2. When the pristine CSCNTs were used as a starting material, the formation efficiency of the nanocrystal/CSCNT composites decreased because the pristine CSCNTs were not dispersed in the KCl-LiCl flux. Therefore, functionalization of the CSCNTs was carried out with VUV light irradiation. The dispersibility of the VUV light-treated CSCNTs increased in the KCl-LiCl flux in comparison with the pristine CSCNTs because oxygen-containing functional groups, such as -COOH and -CO, were introduced onto the surfaces of the CSCNTs.     

特大型零件热处理工艺模拟用试验设备的设计

简述热处理模拟设备研制的由来及其技术特色、结构系统与技术优势,并以具体的模拟试验过程来说明热处理工艺模拟验证实验炉的实际应用情况.     

Feeder components and instrumentation for the JT-60SA magnet system

The modifying of the JT-60U magnet system to the superconducting coils is progressing as a satellite facility for ITER by both parties of Japanese government and European commission in the Broader Approach agreement. The magnet system requires current supplies of 25.7 kA for 18 TF coils and of 20 kA for 4 CS modules and 6 EF coils. The magnet system generates an average heat load of 3.2 kW at 4 K to the cryogenic system. The feeder components connected to the power supply provide current supply. The cooling pipes connected to the cryogenic system provide coolant supply. The instrumentation of the JT-60SA magnet system is used for its operation.     

Model calculation of the pore-size and porosity dependences of bulk moduli in nanoporous materials

The bulk moduli of nanoporous materials are studied theoretically on the basis of an interatomic potential. We consider model nanoporous materials in which nanometer-sized cubic-shaped pores are periodically arranged in the fcc lattice. The pore-size and porosity dependences of bulk modulus are calculated exactly for the model nanoporous materials. It is shown that the bulk moduli of model nanoporous materials decrease moderately with increasing porosity. If nanoporous materials of the same porosity are compared, the bulk modulus increases and becomes constant with increasing pore-size. It is suggested from the calculation results that nanoporous materials without defects have higher bulk moduli than materials having micrometer-sized pores.