Synthesis of Sn-Incorporated Folded Sheets Mesoporous Materials (Sn-FSM-16)

Sn-incorporated folded sheets mesoporous materials (Sn-FSM-16) with various contents of Sn were synthesized by using a mixture of water glass, SnCl₄ and NaOH as starting materials. Hexadecyltrimethyl-ammonium chloride (surfactant) was used to intercalate into the layered silicate. The reaction process was followed by measurements of XRD patterns of intermediates. The Sn-FSM-16 was formed via the following mechanism: (1) layered silicates such as - - and -Na₂Si₂O₅ were formed as intermediates by the calcination of the mixture of the starting materials; (2) the surfactant was intercalated into the layered silicates; (3) the surfactant-silicate complex with hexagonal structure was obtained as a precursor of Sn-FSM-16; (4) the precursor was calcined to decompose the surfactant in the interlayer and was changed to Sn-FSM-16. The structural aspect of Sn in Sn-FSM-16 was studied by XPS profiles of Sn 3d _5/2 and Si_2p, ²⁹ Si MAS NMR and FTIR. The content of Sn in Sn-FSM increased with increasing concentrations of both Sn and NaOH in the starting materials. The surface area of Sn-FSM-16 decreased with an increase of Sn content in Sn-FSM (1160–620 m²/g).     

Vapor phase hydroformylation of ethene over Co/SiO2 promoted by noble metals: dynamic in situ diffuse reflectance FT-IR study of surface species

An in situ diffuse reflectance FT-IR technique was employed to investigate the active surface species and the reaction mechanism of the oxygenate formation in the vapor phase hydroformylation of ethene on Co/SiO₂ promoted with various noble metals such as Ir, Rh, Pt, Re, Ru, and Pd. Co(A)/SiO₂ and Ir(CO)/SiO₂ which were derived from cobalt(II) acetate and Ir₄(CO)₁₂, respectively, were quite inactive in the reaction, and showed only quite small peaks of adsorbed CO under the conditions of 1.1 MPa of C₂H₄/CO/H₂ at 298 K. In contrast, Co(A)-Ir(CO)/SiO₂, which were very active in the reaction, exhibited strong absorption bands of linear and bridged CO species. At 423–463 K, propanal adsorbed on the catalyst and acyl species which is suggested as the intermediate for the formation of propanal were also observed on this catalyst. By exposing CO preadsorbed on this catalyst to C₂H₄/H₂ at 289 K and 0.1 MPa, the intensity of the linear CO band decreased, and the bands of propanal and acyl species emerged simultaneously, whereas that of the bridged CO band remained constant after the initial drop. These results suggested that the oxygenates are formed via the CO insertion into adsorbed ethyl species, and linear CO species plays a major role in the CO insertion on these noble metal-promoted cobalt catalysts.     

Formation of Small-Sized CdSxSe1-x Crystals in Sol-Gel-Derived SiO2 Glasses

Silica glasses doped with small-sized CdS_x-Se_1-x crystals were prepared by the sol-gel method. Gels synthesized by the hydrolysis of Si(OC₂H₅)₄, in the presence of CdSeO₄ with NH₄SCN dissolved in HNO₃ or NH₄OH, were heated in H₂-N₂ atmosphere. The pH value of solutions for CdSeO⁴ and NH⁴SCN primarily determined the fraction of anions in CdS^xSe^1-x crystals. The anion content in crystals was dependent on the pH value of the solvent and/or heat-treatment temperature, and the sulfur fraction changed from 0.1 to 0.6. The optical absorption spectra were red-shifted as the selenium content and the crystal size increased, and the emission spectra showed a sharp band near the absorption edge position and a broad tail extending into the long wavelength. The optical band gap energies increased reciprocally proportional to the square of the crystal size.     

Synthesis and properties of N,N'-unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s

N,N'- Unsymmetrical dialkyl-3,4:9,10-perylenebis(dicarboximide)s (in which alkyl = methyl, ethyl, propyl, butyl, isobutyl, pentyl, hexyl and octyl) were prepared by the condensation of N-alkyl-3,4:9,10-perylene-tetracarboxylic monoanhydride monoimide with the appropriate alkyl-amines. The properties of these derivatives as pigments were tested and their thermal stability measured.     

羧甲基纤维素阳离子化衍生物的研究现状

羧甲基纤维素阳离子化改性是制备性能优良的天然两性高分子的重要方法之一。文章综述了迄今为止羧甲基纤维素阳离子化改性所用的阳离子单体的主要类型及其接枝的若干主要途径,其中包括自由基型接枝共聚、高分子侧基反应、聚合后功能化等三大类。     

聚合物熔体在圆锥短口模的挤出胀大方程

深入讨论了聚合物熔体在不同长径比、不同角度圆锥短口模的挤出胀大现象及机理，利用生产用挤出机进行不同角度的圆锥短口模实验。结果表明，圆锥短口模挤出过程中，熔体在收敛流道受到拉伸流变，导致强烈的入口弹性效应，表现为熔体在短口模挤出时显著的挤出胀大。理论和实验研究结果进一步表明不同圆锥口模入口角对实验材料表现出有不同的挤出胀大值。     

JOB-9003炸药"激热"冲击损伤破坏及超声特征

进行了未经热处理的JOB-9003塑料粘结炸药(PBX)标准压缩试样的"激热"冲击损伤破坏试验,对试样热冲击试验前后的超声波特性参量进行了检测,试验显示出JOB-9003炸药存在一个明显的"激热"冲击损伤破坏临界温度差,并获得了试样热冲击损伤破坏的超声波参量特征.     

Characterization of highly active silver catalyst for NOx reduction in lean-burning engine exhaust

A new Ag/Al₂O₃ catalyst for removing NOx in lean exhaust gas was developed. Oxidized Ag/Al₂O₃ catalyst is highly active for reduction of NOx with ethanol and propene, whereas reduced Ag/Al₂O₃ catalyst is less active for these reactions. Selectivity to N₂ is also high on the oxidized Ag/Al₂O₃ compared to that on the reduced Ag/Al₂O₃. XRD and SEM studies of these two types of Ag catalysts suggest that oxidation induces an interaction between Ag and the support, where the particles are grown in large size. In contrast, the metallic Ag particles are finely dispersed by the reduction process. Although dispersion of Ag particles is decreased by the oxidation process, the catalytic activity is increased. This suggests that the Ag-alumina sites created in the high temperature oxidizing environment are active in catalytic reduction of NOx. This revised version was published online in July 2006 with corrections to the Cover Date.     

Influence of activated carbon pore structure on oxygen reduction at catalyst layers supported on rotating disk electrodes

Carbon materials are often used as catalyst supports, and for catalysts in electrodes of a polymer electrolyte fuel cell, carbon black has been used. Recently, it was found, however, that activated carbon could replace carbon black and besides, significantly improve the activity of the electrode catalyst layer for oxygen reduction. In the present study, to optimize the pore structure of activated carbon for further activity improvement, the influence of the pore structure on the activity was investigated using activated carbon of various specific surface areas and mean pore diameters. A catalyst layer was formed from activated carbon loaded with platinum and a polymer electrolyte. The activity of the layer was measured in an oxygen-saturated perchloric acid solution, supporting the layer on a rotating glassy carbon disk electrode. We found that increases in the specific surface area and mean pore diameter increased the activity and that the latter was more effective than the former mainly due to the enhanced mass-transfer in the pores; the catalyst layer formed from activated carbon with the largest mean pore diameter was the most active. Unless pores excessively develop and lose connections between particles, a large pore diameter is therefore desired for the fuel cell electrodes.     

一种含壳聚糖的有机硅纺织柔软剂的研制

以三甲胺、环氧氯丙烷、壳聚糖为原料，合成了N-壳聚糖季铵盐；并将其与氨基硅油、三种非离子型表面活性剂、一种有机硅两性表面活性剂进行复配，制成了一种新型有机硅柔软剂。经检测，产品的离心稳定性、酸碱稳定性及阴离子型表面活性剂稳定性较好；经其整理的纯棉白布不仅具有良好的柔软性和吸湿性，而且具有一定的抗茵活性。