B—ISDN宽带UNI信令点到多点配置的实现

本文根据ＩＴＵ－Ｔ最新的Ｑ．２９７１协议，以及笔者所从事的实际课题，提出一整套Ｂ－ＩＳＤＮ第三层ＵＮＩ信令的软件实现策略，其特点是能同时满足用户对点到点以及点到多点广播这两种通信方式的要求，而且可以动态配置。     

深过冷熔体激发快速定向凝固

阐述了深过冷的方法，深过冷的遗传性，深过冷度的理论极限以及深过冷熔体激发发快速定向凝固的试验方法及其凝固过程，给出了深过冷熔体（Ｃｕ－５ｗｔ％）激发快速定向凝固与铸态试验激发快速定向凝固的初步试验结果。     

Results of initial surgery and adjuvant chemotherapy in treating small-cell lung cancer

The changes in the intestinal mucosal permeability were observed by quantitatively assessing plasma to luminal clearance of 99mTc-labeled DTPA, and the influence of platelet activating factor (PAF) on it was investigated. The results showed that intestinal permeability was significantly elevated after severe burn and was positively correlated with increase in PAF in the intestinal tissue (r = 0.94, P < 0.01). PAF antagonist therapy could significantly attenuate postburn intestinal mucosal permeability. It is concluded that PAF is one of the important factors causing increased intestinal permeability after severe burn.     

Phase equilibria in InAsSbP quaternary alloys grown by liquid phase epitaxy

The quaternary alloy InAs_1−x−ySb_xP_y, lattice-matched to InAs, is a promising material for the production of infrared light sources for the detection of gases in the 2–4 μm region of the spectrum. In this work, thermodynamic phase equilibrium calculations have been carried out to determine the compositions required for liquid phase epitaxial growth and the extent of the miscibility gap in the solid material. For high band gap materials, the desired growth temperature is found to be intermediate between a low temperature required to grow P-rich solids and higher temperatures required to avoidspinodal decomposition. Conventional LPE growth at an intermediate temperature of 583°C is found to produce good material with high luminescence efficiency and excellent optical characteristics. Problems with phosphorus loss from the melt are also discussed and lower growth temperatures are found to considerably reduce this problem. Growth in the metastable region between the binodal and spinodal lines has been achieved with the production of phosphorus-rich solids with concentrations up to y = 0.445.     

柱形颗粒群直径分布的激光衍射测量技术

提出了用激光衍射功率谱方法测量柱形颗粒群直径分布的技术方法，解决了长颗粒随机排列时的功率谱探测，及数据快速优化方法等技术难题。此技术已地应用于由羊毛和化纤截成的柱形颗粒群直径分布的测量，实现结果证明了此技术的可行性和实用性。     

CaF_2-CaO-MgO-Al_2O_3-SiO_2电渣渣系高温力学性能的研究

本文针对结晶器与铸锭作相对移动的电渣重熔过程中对渣系的高温强度及塑性的要求,对10种CaF_2-CaO-MgO-Al_2O_3-SiO_2渣组成进行了渣的高温强度及塑性的测定,建立了渣组成—渣的岩相结构—渣高温强度及塑性间的对应关系,并选择出较合适的成分范围为CaF_2 35～60％,CaO 10～25％,Al_2O_3 10～20％,SiO_25～15％,MgO≈5％。对其中一个成分的渣进行了电渣热穿孔熔铸中空锭生产实验,并取得了良好的表面质量。     

NUMERICAL SIMULATION OF STREAMBED HEAT TRANSFER

１．　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｓｉｍｕｌａｔｉｏｎｏｆｓｔｒｅａｍｗａｔｅｒｔｅｍｐｅｒａｔｕｒｅｉｓｓｉｇｎｉｆｉｃａｎｔｌｙｉｍｐｏｒｔａｎｔｆｏｒｔｈｅｓｔｕｄｙｏｆｎｕｍｅｒｉｃａｌｍｏｄｅｌｉｎｇｏｆｒｉｖｅｒｉｃｅｐｒｏｃｅｓｓｅｓ［１］　．Ｈｉｓｔｏｒｉｃａｌｌｙ，ｔｈｅｍａｔｈｅｍａｔｉｃａｌｍｏｄｅｌｉｎｇｏｆｔｈｅｔｒａｎｓｐｏｒｔａｎｄｆａｔｅｏｆｈｅａｔｉｎａｗａｔｅｒｂｏｄｙｈａｓｂｅｅｎｔｈｅｓｕｂｊｅｃｔｏｆｅｘｔｅｎｓｉｖｅｓｔｕｄｙｆｏｒｖａｒｉｏｕｓｒｅ…     

钛对耐硫变换催化剂性能的影响

利用常压微反色谱、程序升温还原（ＴＰＲ）等技术研究了钛对耐硫变换催化剂性能的影响，结果表明：（１）钛能明显提高耐硫变换催化剂的活性，尤其是在低于６２３Ｋ时活性提高最为明显；（２）工业侧流试验后，含钛样品的保留活性及活性保留率均高于Ｋ８－１１；（３）催化剂中添加助剂ＴｉＯ２后，能显著提高对原料气中Ｈ２Ｓ含量变化的适应能力，因此可以拓宽对原料气的选择范围，对工业生产有着十分重要的现实意义。     

鱼雷罐喷粉预处理优化研究

在已经得到的描述鱼雷罐喷粉处理基本参数具体表达式的基础上，运用多目标非线性优化方法，对工艺操作参数进行优化。