Effect of applying voltage on photocatalytic destruction of 1,4-dioxane in aqueous system

In the current work, we prepared a TiO₂ coating on stainless mesh using electrophoretic deposition (EPD), and applied voltage to a stainless mesh to examine the synergy effect on photocatalysis of both 1,4-dioxane and ethylene glycol diformate (EGDF), a main intermediate of the photocatalysis of 1,4-dioxane. The photocatalytic decomposition rate of 1,4-dioxane depends on applying voltage under diffusion-limited reaction conditions. Ethylene glycol diformate and 1,4-dioxane exhibited inverse voltage dependence. Voltage swing provides high-efficiency photocatalysis of 1,4-dioxane while suppressing EGDF formation. This method will be effective for a photocatalysis system containing several chemicals, each with different voltage dependence.     

JOB-9003炸药"激热"冲击损伤破坏及超声特征

进行了未经热处理的JOB-9003塑料粘结炸药(PBX)标准压缩试样的"激热"冲击损伤破坏试验,对试样热冲击试验前后的超声波特性参量进行了检测,试验显示出JOB-9003炸药存在一个明显的"激热"冲击损伤破坏临界温度差,并获得了试样热冲击损伤破坏的超声波参量特征.     

Feeding-stimulant activity of algal glycerolipids for marine herbivorous gastropods

Phagostimulant activity of glycerolipids such as digalactosyldiacylglycerol (DGDG), 6-sulfoquinovosyldiacylglycerol (SQDG), phosphatidylcholine (PC), phosphatidylethanolamine (PE), etc., have been examined using the Avicel plate method for three kinds of marine herbivorous gastropods, the abaloneHaliotis discus, the turban shellTurbo cornutus, and the topshellOmphalius pfeifferi. DGDG showed strong activity for all the test animals. SQDG was much less active than the other glycerolipids for abalone. The turban shell and the top shell responded more or less sensitively to all tested glycerolipids at doses of 10–20g/sample zone.Chemical Studies on Phagostimulants for Marine Gastropods. Part VIII. For Part VII, see Sakata et al. (1988a).     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.     

New Preparation Method of CdS Clusters Encapsulated in Y-Type Zeolites

CdS clusters encapsulated in Y-type zeolite were prepared by a novel technique with non-aqueous systems. The mechanical mixture of CdCl₂· 2.5H₂O crystal with Y-type zeolite was heated at 773 K, followed by the H₂S treatment at 373 K, resulting in the formation of CdS clusters with the size <2.3 nm.     

Separation of Polyvinyl Chloride from Plastic Mixture by Froth Flotation after Surface Modification with Ozone

Selective modification by ozonation for the surface of polyvinyl chloride (PVC) was evaluated to separate PVC from the other plastics, polyethylene terephthalate (PET), polycarbonate (PC) and polymethyl methacrylate (PMMA), with almost the same density as PVC by the froth flotation process. Ozonation could selectively decrease the contact angles of flexible PVC from 87.5 degrees to 68.4 degrees and rigid PVC from 90.3 degrees to 66.9 degrees, whereas little decreases in the contact angle were observed for other plastics. This would be due to the replacement of the chloride group on the surface of PVC, into hydrophilic functional groups; carbonyl, carboxyl and ester group. The PVC was successfully separated from the other plastics by the froth flotation process after the selective surface modification by ozonation.     

一种含壳聚糖的有机硅纺织柔软剂的研制

以三甲胺、环氧氯丙烷、壳聚糖为原料，合成了N-壳聚糖季铵盐；并将其与氨基硅油、三种非离子型表面活性剂、一种有机硅两性表面活性剂进行复配，制成了一种新型有机硅柔软剂。经检测，产品的离心稳定性、酸碱稳定性及阴离子型表面活性剂稳定性较好；经其整理的纯棉白布不仅具有良好的柔软性和吸湿性，而且具有一定的抗茵活性。     

Effect of MgO Addition on the Bondability and Interfacial Reaction between Dielectric and Glass-Ceramics for the Fabrication of Multi-Component Ceramic Substrates

Bondability and interfacial reaction between dielectric and insulator layers have been examined to obtain a basic understanding of bonding mechanisms. Lead-containing complex perovskite was used as a dielectric material. Two kinds of glass-ceramics were used as insulator material; lead borosilicate glass containing Al_2O3 (insulator A) and the same containing Al₂O₃ and M_gO (insulator B). Dielectric and insulator layers did not bond when insulator A was used. When insulator B was used, however, strong bonding was achieved between the two layers by firing the powder compacts at temperatures between 800° and 1000°C. Addition of M_gO to lead borosilicate glass increased the thermal expansion coefficient to that of the dielectric and enhanced the formation of reaction layers, resulting in good bonding. Two reaction layers were identified. The main reaction products were enstatite and bredigite for one layer contacting the dielectric, and enstatite and a compound with the same diffraction pattern as that of faujasite for the other layers contacting insulator B.     

基于移动互联网的养殖平台开发与应用

将移动互联网和物联网信息关键技术应用于水产养殖中,整合渔业新闻动态、水产养殖技术、手机信息服务等功能模块,为实现健康养殖的渔业生产保驾护航,不仅大大降低了生产人员的劳动强度,方便了技术人员对数据的收集和分析,并提高了养殖动物病害预警的能力,同时也配合了水污染治理工作。     

Measurement of residual stresses in injection‐molded polymer parts by time‐resolved fluorescence

Time‐resolved fluorescence properties of 9‐methylanthracene (9MAn) dispersed in film of polyvinylchloride (PVC) containing carbon black were studied under tensile loadings. The fluorescence lifetime of 9MAn decreased from 5.70 to 5.55 ns, whereas the stresses acting on the films increased from 0 to 3 MPa. The change in fluorescence lifetimes of 9MAn during the stress relaxation process showed that the fluorescence lifetimes were correlated with the stresses, not with the strains. The results suggest that 9MAn is a useful probe for monitoring stresses acting on the matrix. With the use of the fluorescence properties of 9MAn, the residual tensile stresses on the skin‐layer of PVC injection‐molded test pieces were estimated. The estimated residual stresses were about ～ 1 MPa. The residual stresses were relaxed to 0 MPa with annealing at 100°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2600–2603, 2002