大截面金属镍棒的焊接工艺与实践

金属镍在电渣精炼前需用氩弧焊焊接接长,为保证焊接接头具有足够熔深,需要大参数进行焊接.采用直流焊机并联使用解决了焊机电流不足的情况,通过采取垫高镍棒端头,使接缝处于受压状态,以防止裂纹的产生.     

Fabrication and Characterization of Carbon Nanotube–Titanium Nitride Composites with Enhanced Electrical and Electrochemical Properties

This work reports the fabrication and the characterization of a new composite consisting of multiwalled carbon nanotubes (CNTs) and conducting titanium nitride (TiN) with a higher specific surface area ( S _BET), enhanced electrical conductivity (σ), and specific capacitance. With increasing CNT content, the electrical conductivity and electrochemical performance of the CNT–TiN composites gradually increase. In the presence of 5 wt% (12.0 vol%) CNTs, the electrical conductivity and the weight-specific capacitance of CNT–TiN composite are increased by 3.6 times and 54.8% compared with pure TiN, respectively.     

辽河油田小龙湾地区粗面岩油藏岩石力学特性研究

粗面岩油藏是一种特殊油气藏，已受到国内外油田的广泛关注，但目前国内对粗面岩力学特性的研究还很少。分析了粗面岩的岩性和裂缝发育情况，以岩石力学和弹性力学为理论基础，从岩石的应力-应变曲线和试验的基本原理出发，结合辽河油田小龙湾地区现场实际，通过粗面岩岩心单轴试验，得到了粗面岩的抗压强度、弹性模量、泊松比和抗拉强度等基本岩石力学参数。根据试验得到的应力-应变曲线，结合弹性力学相关理论，得出小龙湾地区粗面岩的力学特性为线弹性，并给出了其基本力学参数的取值范围。谊结果对辽河油田小龙湾地区粗面岩油气藏的压裂设计和油气田开发具有重要的指导意义和参考价值。     

Numerical simulation of two-phase turbulent flow in hydraulic and hydropower engineering

In connection with the specific features of high velocity aerated flow generated by hydraulic engineering structures, the mathematical model is developed for high turbulence air-water two-phase flow with the use of twin flow theoretical model in this paper. Furthermore the numerical method is proposed to treat bubbled flows. In addition, on the basis of air-water stratified twin flow model, the new calculation methods and free surface tracking technique are proposed to describe complicated movements of the free surface. Finally, the proposed model is used to calculate artificial aerated flows. The computed results coincide quite well with experimental results. This means that the proposed method can provide solid basis for practical engineering design.     

The feature-based posterior crown design in a dental CAD/CAM system

This paper presents a newly developed CAD approach for a quick and accurate design of a dental posterior prosthesis. The approach arises from the basic idea that every human tooth has its own specific features. Based upon the features of the standard posterior tooth, the initial data containing the defined feature points are firstly acquired from the scanned points of the standard tooth. The standard prosthetic profile is thereby formulated using the bicubic Nurbs surface fitting technique. This profile has the two functions of possessing the same features with the patient’s missing posterior tooth, and the adjustability with the feature points and the defined B-spline profile feature curves. For the purpose of the adjustment of the established model, the global and occlusal feature curves are proposed considering the individual patient’s original information. According to these curves, the corresponding standard prosthetic profile is locally adjusted to meet the fit of the global size and occlusal surface. Finally, a close and continuous profile of a posterior crown is generated. Using this design, a posterior prosthesis is successfully manufactured in the computer-aided machining process.     

电子政务建设若干经验与问题探讨

介绍世界电子政务的发展状况,在总结各国电子政务发展经验和特点的基础上,指出我国要建设优质、高效的电子政务的关键,是要树立转变观念、统一规划、分步实施的建设理念.     

非标准工况下空分设备增产氩的研究与实践

文章对非标准工况下的空分设备增产氩措施进行了研究。以宝钢6#60000m3/h空分设备为例,通过设计型算法和校核型算法,建立了空分设备精馏的数学模型,通过改变数学模型的参数,分析了在非标准工况下精馏塔内的组分浓度分布,并提出了优化后的操作方案和操作参数,实施后提高了空分设备的氩提取率,取得了显著的经济效益。     

跳频对GSM网络容量的贡献

本首先提出了射频跳频技术是提高网络容量的关键技术。在此基础上，以跳频为着眼点，分析并量化计算了跳频对干扰的改善度，同时根据跳频对容量的影响，给出现有技术条件下GSM网容量的极限。     

焦化干气一步法预处理多功能催化剂的工业侧线试验

对焦化干气一步法预处理工艺催化剂进行了工业侧线试验。考察了温度和体积空速对催化剂的活性及催化剂稳定性和加氢选择性的影响。催化剂为以复合型ZnO和过渡金属氧化物为活性组分的多功能催化剂,用于低温下焦化干气中烯烃加氢和硫化物脱除。试验结果表明,在压力1.6MPa、温度285～350℃、空速100～500h-1的条件下,多功能催化剂能将焦化干气中烯烃的体积分数由8%～14%降至0,总硫含量从10～70μg/g脱除至5μg/g以下;经28d考核,多功能催化剂仍保持良好的烯烃加氢和硫化物脱除性能,可用于精制焦化干气。     

聚丙烯催化剂的研发进展

综述了用于丙烯聚合的Ziegler-Natta催化剂在给电子体技术及催化剂制备工艺等方面,茂金属催化剂在制备丙烯均聚物、丙烯共聚物及特殊聚丙烯等方面,非茂单活性中心催化剂在丙烯活性聚合、丙烯与极性单体共聚及水介质聚合等方面的研发进展;讨论了聚丙烯催化剂的前景。