Fatigue crack-propagation in annealed poly(butylene terephthalate)

Samples with the same percentage crystallinity, supermolecular structure and lamellar thickness but different average molecular weight were prepared to distinguish the effect of tie chain density on fatigue crack propagation (FCP) behaviour. This alteration in molecular weight was accomplished by controlled chain degradation during thermal annealing. A significant decrease in FCP resistance was observed when samples were annealed at different temperatures for various amounts of time. In addition, an examination of the fracture surfaces of these specimens indicates a transition to a more brittle-type behaviour when annealed for longer periods of time at any specific annealing temperature. The decrease in FCP resistance is attributed to a decrease in the tie chain density.     

WC硬质合金颗粒复合耐磨材料的韧性与断裂

采用不同类型的WC硬质合金颗粒及不同成分的金属基本组成的两种复合耐磨材料，研究了复合材料的韧性及其影响因素，观察分析了其断口形貌及断裂机理．结果表明，复合材料的韧性与断面上WC硬质合金颗粒及金属基体的面积分数有关，主要取决于金属基体的成分、组织状态、韧性和含量，基体的韧性越好，含量越多，则复合材料的韧性越高．在冲击载荷作用下，WC硬质合金的断裂为脆性解理断裂，而金属基体则为具有少量塑性变形的准解理断裂。     

Estimating discharge in gravel‐bed river using non‐contact ground‐penetrating and surface‐velocity radars

Discharge measurement is a critical task for gravel‐bed channels. Under high‐flow conditions, the elevation of the riverbed changes significantly by intensive torrential flow. The stage–discharge relations commonly used for stream discharge estimation may no longer be adequate. The contact‐type velocity measuring is also subject to measurement errors and/or instrument failures by the high‐flow velocities, driftwood, stumps, and debris. This study developed a new real‐time method to estimate river discharge in gravel‐bed channels. A systematic measuring technology combining ground‐penetrating radar and surface‐velocity radar was employed. The rating curves representing the relations of water surface velocity to the channel cross‐sectional mean velocity and flow area were established. Stream discharge was then deduced from the resulting mean velocity and flow area. The proposed method was examined in a steep gravel‐bed reach of the Cho‐Shui River in central Taiwan. The estimated stream discharge during three flood events were compared to the prediction by using the stage–discharge relation and the index‐velocity method. The proposed method of this study is capable of computing reasonable values of discharge for an entire flood hydrograph, whereas the other two methods tend to produce large extrapolation errors. Moreover, when the computed discharge is used in 2D flood flow simulation, the proposed method demonstrates better performance than the commonly used stage–discharge and index‐velocity methods.     

Evaluation of a haptics-based virtual reality temporal bone simulator for anatomy and surgery training

Introduction

Virtual reality simulation training may improve knowledge of anatomy and surgical skills. We evaluated a 3-dimensional, haptic, virtual reality temporal bone simulator for dissection training.

Methods

The subjects were 7 otolaryngology residents (3 training sessions each) and 7 medical students (1 training session each). The virtual reality temporal bone simulation station included a computer with software that was linked to a force-feedback hand stylus, and the system recorded performance and collisions with vital anatomic structures. Subjects performed virtual reality dissections and completed questionnaires after the training sessions.

Results

Residents and students had favorable responses to most questions of the technology acceptance model (TAM) questionnaire. The average TAM scores were above neutral for residents and medical students in all domains, and the average TAM score for residents was significantly higher for the usefulness domain and lower for the playful domain than students. The average satisfaction questionnaire for residents showed that residents had greater overall satisfaction with cadaver temporal bone dissection training than training with the virtual reality simulator or plastic temporal bone. For medical students, the average comprehension score was significantly increased from before to after training for all anatomic structures. Medical students had significantly more collisions with the dura than residents. The residents had similar mean performance scores after the first and third training sessions for all dissection procedures.

Discussion

The virtual reality temporal bone simulator provided satisfactory training for otolaryngology residents and medical students.     

Strain-induced crystallization,Part IV: Induction time analysis

The empirical equation, 1/t_i = Ae^Ei/RT, which expresses the exponential dependence of the reciprocal of crystallization induction time, t_i, has been analyzed and shown to be equivalent to the nucleation rate equations derived earlier in Part III (1). Consequently we have used the t_i measurements obtained earlier by Krueger and Yeh to calculate not only the nucleation rate enhancements but also the melting point elevations, the relative crystal thickness changes and molecular coil extension ratios of shear-crystallization polyethylene. It is shown that polyethylene when crystallized between 129 and 131°C at shear rates between 1.56 and 9.70 sec^?1 can have melting point increases of 4.2 to 7.2°C and crystal thickness decreases of 20 to 25 percent, when compared to those crystallized at 130°C in the quiescent state. The predicted “coil” extension in the melt just prior to shear-induced crystallization ranges between 21 and 36 percent. The results of these analyses as well as those on nucleation rates of polyethylene oxide are discussed in detail.     

Preparation and properties of heterocyclically conjugated poly(3‐hexylthiophene)–clay nanocomposite materials

A series of heterocyclically conjugated polymer–clay nanocomposite (PCN) materials that consisted of organic poly(3‐hexylthiophene) (P3HT) and inorganic montmorillonite (MMT) clay platelets were prepared by in situ oxidative polymerization with FeCl₃ as an oxidant. The as‐synthesized PCN materials were characterized by Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (WAXRD), and transmission electron microscopy (TEM). The effects of the material composition on the anticorrosion, gas barrier, thermal stability, flammability, mechanical strength, and electrical conductivity properties of the P3HT and PCN materials were studied by electrochemical corrosion measurements, gas‐permeability analysis (GPA), thermogrametric analysis (TGA), limiting oxygen index (LOI) measurements, dynamic mechanical analysis (DMA), and a four‐point probe technique, respectively. The molecular weights of extracted and bulk P3HT were determined by gel permeation chromatography (GPC) with THF as an eluant. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3438–3446, 2004     

Enhanced corrosion prevention effect of polysulfone–clay nanocomposite materials prepared by solution dispersion

A series of polymer–clay nanocomposite (PCN) materials containing polysulfone (PSF) and layered MMT clay were successfully prepared by effectively dispersing inorganic nanolayers of MMT clay in an organic PSF matrix via a solution dispersion technique. The synthesized PCN materials were subsequently investigated with a series of characterization techniques, including Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The prepared PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in corrosion prevention to those of bulk PSF, based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and electrochemical impedance spectroscopy (EIS) in a 5 wt % aqueous NaCl electrolyte. The effects of material composition on the molecular barrier, mechanical strength and optical clarity of PSF and PCN materials, in the form of membranes, was also studied by molecular permeability analysis (GPA), dynamic mechanical analysis (DMA) and UV‐Visible transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 631–637, 2004     

Stearic acid unlike shorter-chain saturated fatty acids is poorly utilized for triacylglycerol synthesis and β-oxidation in cultured rat hepatocytes

Utilization of stearate as compared to various saturated fatty acids for cholesterol and lipid synthesis and β-oxidation was determined in primary culture of rat hepatocytes. At 0.5 mmol/L in the medium, stearate (18:0) adequately solubilized by albumin was less inhibitory to cholesterol synthesis from [2-¹⁴C] acetate than myristate (14:0) and palmitate (16:0) (68% vs. 91 and 88% inhibition, respectively). The rate of incorporation into cholesterol from [1-¹⁴C] stearate (3.0±0.6 nmol/mg protein/4 h) was 37-, 1.8-, and 7.8-fold of that from myristate, palmitate, and oleate, respectively. Conversely, the rate of [1-¹⁴C] stearate incorporation into total glycerolipids was 88–90% lower than that of labeled palmitate, myristate, and oleate. The rate of [1-¹⁴C] stearate incorporation into triacylglycerol (3.6±0.4 nmol/mg protein/4 h) was 6–8% of that from myristate, palmitate, oleate, and linoleate. The rate of stearate incorporation into phospholipids was the lowest among tested fatty acids, whereas the rate of mono- and diacylglycerol synthesis was the highest with stearate treatment. The rate of β-oxidation as measured by CO₂ and acid soluble metabolite production was also the lowest with [1-¹⁴C] stearate treatment at 22.7 nmol/mg protein/4 h, which was 35–40% of those from other [1-¹⁴C] labeled fatty acids. A greater proportion of stearate than other fatty acids taken up by the hepatocytes remained free and was not metabolized. Clearly, stearate as compared to shorter-chain saturated fatty acids was less efficiently oxidized and esterified to triacylglycerol in cultured rat hepatocytes.     

On the examination of recycle on heat (and mass) transfer in concentric tubes

The effect of recycle on heat (and mass) transfer in concentric circular tubes has been investigated by finite difference methods. Theoretical results show that recycle can enhance the heat transfer rate for large Graetz numbers compared with that in an open tube (without an inner tube inserted and without recycle). Competition between a preheating effect and a residence-time effect can be used to explain the heat transfer behavior. The heat transfer rate can be further augmented, with nearly no increase in total pressure drop, by employing flow pattern B instead of flow pattern A.     

Moisture absorption behavior of rubber‐modified epoxy resins

The moisture absorption behavior of diglycidyl ether of bisphenol A/ethylene diamine resins incorporating a carboxy‐terminated butadiene–acrylonitrile rubber was investigated and associated with their morphology of phase separation. Although the diffusion coefficient of moisture was increased with the rubber content, its activation energy and free volume for moisture diffusion were barely changed until phase inversion occurred. After phase inversion, the free volume was significantly increased, and the activation energy decreased. In addition, the moisture absorption also reduced the β‐transition temperature of the resins and slightly increased the glass‐transition temperature before phase inversion. However, the reverse was found after phase inversion. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3718–3724, 2002