A mathematical model of hydrogen permeation in pure iron

A one-dimensional problem of hydrogen permeation through thin plates is analysed. The permeation process is considered as a two-stage transient process. The first stage is assumed to be transportation, and the second diffusion. The non-linear time-dependent diffusion equation is then solved by employing a finite difference scheme. The result shows that the lag time is a quadratic function of the plate thickness. Also, the square of the hydrogen concentration asymptotically tends to be linear across the plate thickness.     

Pitfalls in Atmospheric Correction of Ocean Color Imagery: How Should Aerosol Optical Properties be Computed?: Reply to Comment.

Gordon [Appl. Opt. 42, 542 (2003)] argues that use of external rather than internal mixing when aerosol optical properties are computed will not seriously affect atmospheric correction of ocean color imagery, in spite of the fact that top of the atmosphere reflectances computed with the two approaches differ significantly as shown by Yan et al. [Appl. Opt. 41, 412 (2002)]. We apply an algorithm for simultaneous retrieval of aerosol optical properties and chlorophyll concentrations to demonstrate that use of the internal-mixing approach leads to atmospheric corrections that differ significantly from those obtained with the more realistic external-mixing approach. For relative humidities of 90% or more, the differences in retrieved aerosol optical properties and chlorophyll concentrations, incurred by application of the internal-mixing approach, become unacceptably large.     

The effect of short time post-weld heat treatment on the fatigue crack growth of 2205 duplex stainless steel welds

The influence of γ content and its morphology on the impact and fatigue crack growth behavior of 2205 duplex stainless steel (DSS) welds were studied in this work. Short time post-heating was able to effectively raise the γ content and the impact toughness of the weld. The variation in microstructures showed less influence on the fatigue crack growth rate (FCGR) of the steel plate and weld except in the low ΔK regime. In contrast, residual welding stresses played a more significant affection on the FCGR of the DSS weld than microstructural factors did. Plastic deformation induced martensitic transformation within a definitely thin layer was responsible for the difference in crack growth behavior between specimens in the low ΔK range. Coarse columnar structure was more likely to have tortuous crack path in comparison with the steel plate.     

Efferent enhancement of a methylcholanthrene-induced sarcoma transplantable in strain 13 guinea pigs

The immunobiology of an antigenic methylcholanthrene-induced sarcoma (MC-D) of inbred strain 13 guinea pigs has been investigated. The induction of concomitant immunity by growing MC-D tumors was indicated by the suppression of small tumor inocula in the presence of a large tumor cell dose and by the regression of intradermal tumor nodules. Furthermore, it was demonstrated that this tumor was coated with antibody in vivo. Previous studies showed that MC-D tumors were infiltrated with killer T cells which were capable of complete tumor destruction in vitro, but could never induce spontaneous regression in vivo. On the basis of all these facts, antibody-mediated efferent enhancement is proposed to be the major escape mechanism of this tumor.     

Some impossibility results in interprocess synchronization

Summary In this paper we construct a formal specification of the problem of synchronizing asynchronous processes under strong fairness. We prove that strong interaction fairness is impossible for binary (and hence for multiway) interactions and strong process fairness is impossible for multiway interactions. Yih-Kuen Tsay received his B.S. degree form National Taiwan University in 1984 and his M.S. degree from UCLA in 1989. He is currently a Ph.D. candidate in the UCLA Computer Science Department. His research interests include distributed algorithms, fault-tolerant systems, and specification and verification of concurrent programs. Rajive L. Bagrodia received the B. Tech. degree in Electrical Engineering from the Indian Institute of Technology, Bombay in 1981 and the M.A. and Ph.D. degrees in Computer Science from the University of Texas at Austin in 1983 and 1987 respectively. He is currently an Assistant Professor in the Computer Science Department at UCLA. His research interests include parallel languages, distributed algorithms, parallel simulation and software design methodologies. He was selected as a 1991 Presidential Young Investigator by NSF.This research was partially supported by NSF PYI Award number ASC9157610 and by ONR under grant N00014-91-J1605     

Effects of particle nonsphericity and radiation polarization on retrieving dust properties from MODIS observations

The scattering and radiative properties of mineral dust aerosols at violet-to-blue (0.412, 0.441, and 0.470 μm) and red (0.650 μm) wavelengths are investigated. To account for the effect of particle nonsphericity on the optical properties of dust aerosols, in the present study, these particles are assumed to be spheroids. A combination of the T-matrix method and an improved geometric optics method is applied to the computation of the single-scattering properties of spheroidal particles with size parameters ranging from the Rayleigh to geometric optics regimes. For comparison, the Lorenz–Mie theory is employed to compute the optical properties of spherical dust particles that have the same volumes as their nonspherical counterparts. The differences between the phase functions of spheroidal and spherical particles lead to quite different lookup tables involved in retrieving dust aerosol properties. Moreover, the applicability of a hybrid approach based on the spheroid model for the phase function and the sphere model for the other phase matrix elements is also demonstrated. The present sensitivity study, employing the moderate resolution imaging spectroradiometer (MODIS) measurements and the fundamental principle of the Deep Blue algorithm, illustrates that neglecting the nonsphericity of dust particles usually leads to an underestimate of retrieved aerosol optical depth; although, depending on the scattering angle, an overestimate is noted in some cases. Furthermore, the effect of including full polarization treatment in forward radiative transfer simulation on dust property retrieval is also investigated. It is found that the effect of radiation polarization on the Deep Blue dust property retrieval is not negligible if the retrieval is based on two violet—blue channels centered at 0.412 and 0.470 μm.     

PROPERTIES OF UV-CURED POLYURETHANE ACRYLATES: EFFECT OF POLYOL TYPE AND MOLECULAR WEIGHT

Several families of UV-cured polyurethane acrylates were synthesized and the effects of polyol type and molecular weight on their physical properties were investigated. Increasing polyol molecular weight led to a lower polyol glass transition temperature, a smaller amount of a separate urethane acrylate phase, and a larger chain length between crosslinks. The first two effects were reflected in lower modulus and strength at room temperature while the larger chain length between crosslinks led to higher elongation at break (room temperature) and lower modulus at high temperatures. The use of different polyols (polycarbonate, polytetramethylene oxide, polypropylene oxide, and polycaprolactone) primarily affected the room temperature modulus due to differences in the position and breadth of the polyol glass transition. The properties of materials based on isocyanatoethyl methacrylate (IEM) and toluene diisocyanate-2-hydroxyethyl melhacrylate (TDI-HEMA) were also compared.     

New PAMA Technology Helps Tackle the New Challenges of China Automotive Sector

Polyalkylmethacrylate (PAMA) based viscosity index improver (VII) and pour point depressant (PPD), with the versatile chemistry and unique performance characteristics, are widely used in advanced formulations, enabling fluids to meet rheological requirement of modern specifications. This paper will be dedicated to the application of PAMA in helping China automotive lubricant formulators tackle the challenges of improving fuel economics from using lower viscosity fluids, of better protection strengthten in t...     

Laminar convection to rotating disks in non-Newtonian power-law fluids

A theoretical result has been obtained for heat transfer to a rotating disk in a non-Newtonian fluid which includes the convective transport in the radial direction. The transient heat transfer problem with step change in disk temperature is studied by instant-local similarity method and the approximate solution is very accurate for small time.     

Effect of hydride orientation on fracture toughness of Zircaloy-4 cladding

Hydrogen embrittlement is one of the major degradation mechanisms for high burnup fuel cladding during reactor service and spent fuel dry storage, which is related to the hydrogen concentration, morphology and orientation of zirconium hydrides. In this work, the J-integral values for X-specimens with different hydride orientations are measured to evaluate the fracture toughness of Zircaloy-4 (Zry-4) cladding. The toughness values for Zry-4 cladding with various percentages of radial hydrides are much smaller than those with circumferential hydrides only in the same hydrogen content level at 25 °C. The fractograghic features reveal that the crack path is influenced by the orientation of zirconium hydride. Moreover, the fracture toughness measurements for X-specimens at 300 °C are not sensitive to a variation in hydride orientation but to hydrogen concentration.