Mechanical and tribological properties of silicon carbide coating on Inconel alloy from liquid pre-ceramic precursor

Liquid polycarbosilane (LPCS) derived hard coatings of silicon carbide (SiC) were deposited on Inconel alloy at three different moderately high temperatures by chemical vapour deposition. The deposited films were characterized by X-ray diffractometry and Field emission scanning electron microscopy. Liquid PCS yielded a mixture of α-SiC and β-SiC during decomposition having uniform round-shaped particles of dimension around 200–300 nm without extensive cracking and few discrete shaped particles were also found to form at higher temperature (i.e. 1100 °C and 1200 °C) deposited films. The coated samples showed substantial increment in hardness and fracture toughness as compared to the uncoated sample. The fracture toughness (K_IC) values of the deposited films were in the range of 6.7–10.7 MPa(m)^1/2. The tribological properties and hardness of the films were also found to vary with deposition temperature. The scratch tracks of the films revealed that brittle failures occurred in all SiC coated substrates.     

Synthesis and thermal behavior of Cu/Y2W3O12 composite

Cu metal matrix composite with Y₂W₃O₁₂ as a thermal expansion compensator was fabricated by high energy ball milling followed by compaction and sintering, and its thermal properties were explored for the potential applications as heat sinks in electronic industries, high precision optics, and space structures. The volume fraction of reinforcement was varied from 40% to 70% in order to tailor the composite for the simultaneous accomplishment of low thermal expansion and high thermal conductivity. The synthesis technique was optimized by varying the parameters like milling time from 1 to 20 h and sintering temperature from 600 to 1000 °C in order to achieve densified composites. The relative density of the composites is found to be around 90% for the 10 h milled powders followed by compaction at a pressure of 700 MPa and sintering at a temperature of 1000 °C. The thermal expansion of the composites exhibits linear behavior in the temperature range 200 to 800 °C and the low coefficient of thermal expansion (CTE) is found to be for Cu–70%Y₂W₃O₁₂ composite whose value, 4.32±0.75×10⁻⁶/°C, matches with that of Si substrate. The thermal conductivities are found to increase with a decrease in the volume fraction of the reinforcement and decrease with an increase in the temperature for all the samples. The experimentally determined CTE and thermal conductivity values are found to be comparable to those predicted by the thermal expansion based Kerner and Turner model and the thermal conductivity based Maxwell model, respectively.     

Modulatory Effects of Biosynthesized Gold Nanoparticles Conjugated with Curcumin and Paclitaxel on Tumorigenesis and Metastatic Pathways—In Vitro and In Vivo Studies

Background: Breast cancer is the most common cancer in women globally, and diagnosing it early and finding potential drug candidates against multi-drug resistant metastatic breast cancers provide the possibilities of better treatment and extending life. Methods: The current study aimed to evaluate the synergistic anti-metastatic activity of Curcumin (Cur) and Paclitaxel (Pacli) individually, the combination of Curcumin–Paclitaxel (CP), and also in conjugation with gold nanoparticles (AuNP–Curcumin (Au-C), AuNP–Paclitaxel (Au-P), and AuNP–Curcumin–Paclitaxel (Au-CP)) in various in vitro and in vivo models. Results: The results from combination treatments of CP and Au-CP demonstrated excellent synergistic cytotoxic effects in triple-negative breast cancer cell lines (MDA MB 231 and 4T1) in in vitro and in vivo mouse models. Detailed mechanistic studies were performed that reveal that the anti-cancer effects were associated with the downregulation of the expression of VEGF, CYCLIN-D1, and STAT-3 genes and upregulation of the apoptotic Caspase-9 gene. The group of mice that received CP combination therapy (with and without gold nanoparticles) showed a significant reduction in the size of tumor when compared to the Pacli alone treatment and control groups. Conclusions: Together, the results suggest that the delivery of gold conjugated Au-CP formulations may help in modulating the outcomes of chemotherapy. The present study is well supported with observations from cell-based assays, molecular and histopathological analyses.     

Whole Body Ip6k1 Deletion Protects Mice from Age-Induced Weight Gain,Insulin Resistance and Metabolic Dysfunction

(1) Background: We previously demonstrated that disruption of IP6K1 improves metabolism, protecting mice from high-fat diet-induced obesity, insulin resistance, and non-alcoholic fatty liver disease and steatohepatitis. Age-induced metabolic dysfunction is a major risk factor for metabolic diseases. The involvement of IP6K1 in this process is unknown. (2) Methods: Here, we compared body and fat mass, insulin sensitivity, energy expenditure and serum-, adipose tissue- and liver-metabolic parameters of chow-fed, aged, wild type (aWT) and whole body Ip6k1 knockout (aKO) mice. (3) Results: IP6K1 was upregulated in the adipose tissue and liver of aWT mice compared to young WT mice. Moreover, Ip6k1 deletion blocked age-induced increase in body- and fat-weight and insulin resistance in mice. aKO mice oxidized carbohydrates more efficiently. The knockouts displayed reduced levels of serum insulin, triglycerides, and non-esterified fatty acids. Ip6k1 deletion partly protected age-induced decline of the thermogenic uncoupling protein UCP1 in inguinal white adipose tissue. Targets inhibited by IP6K1 activity such as the insulin sensitivity- and energy expenditure-inducing protein kinases, protein kinase B (PKB/Akt) and AMP-activated protein kinase (AMPK), were activated in the adipose tissue and liver of aKO mice. (4) Conclusions: Ip6k1 deletion maintains healthy metabolism in aging and thus, targeting this kinase may delay the development of age-induced metabolic dysfunction.     

Managing the Topological Expansion of Computer Networks in an Optimal Way

This article describes a subgradient-based near-optimal heuristic algorithm designed for minimizing the search of links that need to be added to an existing telecommunications network to enhance the survivability and routability of the network.     

Performance Evaluation and Biodegradation Study of Polyvinyl Chloride Films with Castor Oil-based Plasticizer

In the present study, a renewable resource-based plasticizer was synthesized by the lipase-catalyzed esterification reaction of furfuryl alcohol (FA) and castor oil fatty acid (COFA). The resultant ester (FA-COFA ester) was used as secondary plasticizers to the polyvinyl chloride (PVC) films. The PVC films were formulated using the combination of a conventional plasticizer di-butyl phthalate (DBP) and FA-COFA ester as a secondary plasticizer at different concentrations. Films were characterized by X-ray diffraction analysis, scanning electron microscopy, thermal analysis, mechanical performance, and migration stability. A biodegradability study of the PVC films showed increased degradability with increasing concentration of the FA-COFA ester in the PVC film. The study showed that ester of FA and COFA could be a substitute of DBP by as much as 80% of the total plasticizer with improved elongation and tensile properties, and such a kind of sustainable resource-based PVC blend films could be used as a good packaging material with biodegradable property.     

Microstructural Analysis of Liquid-Phase-Sintered β-Silicon Carbide

The microstructures of fine-grained β-SiC materials with α-SiC seeds annealed either with or without uniaxial pressure at 1900°C for 4 h in an argon atmosphere were investigated using analytical electron microscopy and high-resolution electron microscopy (HREM). An applied annealing pressure can greatly retard phase transformation and grain growth. The material annealed with pressure consisted of fine grains with β-SiC as a major phase. In contrast, the microstructure in the material annealed without pressure consisted of elongated grains with half α-SiC. Energy-dispersive X-ray analysis showed no differences in the amount of segregation of aluminum and oxygen atoms at grain boundaries, but did show a significant difference in the segregation of yttrium atoms at grain boundaries along SiC grains for the two materials. The increased segregation of yttrium ions at grain boundaries caused by the applied pressure might be the reason for the retarded phase transformation and grain growth. HREM showed a thin secondary phase of 1 nm at the grain boundary interface for both materials. The development of a composite grain consisting of a mixture of β/α polytypes during annealing was a feature common to both materials. The possible mechanisms for grain growth and phase transformation are discussed.     

Elongation of (n−9) and (n−7)cis-monounsaturated and saturated fatty acids in seeds ofsinapis alba

Lipids in developing seeds ofSinapis alba contain appreciable proportions of (n−7)octadecenoic (vaccenic) acid besides its (n−9) isomer (oleic acid), whereas the constituent very long chain (>C₁₈) monounsaturated fatty acids of these lipids are overwhelmingly composed of the (n−9) isomers. Cotyledons of developingSinapis alba seed use [1-¹⁴C]acetate, [1-¹⁴C]malonate or [1,3-¹⁴C]malonyl-CoA for de novo synthesis of palmitic, stearic and oleic acids and for elongation of preformed oleic, vaccenic and stearic acids to their higher (n−9), (n−7) and saturated homologs, respectively. Moreover, elongation of preformed (n−7)palmitoleic acid to vaccenic acid is observed. Stepwise C₂-additions to preformed oleoyl-CoA by acetyl-CoA or malonyl-CoA yielding (n−9)icosenoyl-CoA, (n−9)docosenoyl-CoA and (n−9)tetracosenoyl-CoA are by far the most predominant reactions catalyzed by the elongase system, which seems to have a preference for oleoyl-CoA over vaccenoyl-CoA as the primer. The pattern of¹⁴C-labeling of the very long chain fatty acids formed from either acetate or malonate shows a close analogy in the mode of elongation of monounsaturated and saturated fatty acids.     

Kinetic Monte Carlo simulation for homogeneous nucleation of metal nanoparticles during vapor phase synthesis

We present a free‐energy driven kinetic Monte Carlo model to simulate homogeneous nucleation of metal nanoparticles (NPs) from vapor phase. The model accounts for monomer‐cluster condensations, cluster–cluster collisions, and cluster evaporations simultaneously. Specifically, we investigate the homogeneous nucleation of Al NPs starting with different initial background temperatures. Our results indicate good agreement with earlier phenomenological studies using the Gibbs# free energy formulation from Classical Nucleation Theory (CNT). Furthermore, nucleation rates for various clusters are calculated through direct cluster observations. The steady‐state nucleation rate estimated using two different approaches namely, the Yasuoka‐Matsumoto (YM) and mean first passage time (MFPT) methods indicate excellent agreement with each other. Finally, our simulation results depict the expected increase in the entropy of mixing as clusters approach the nucleation barrier, followed by its subsequent drastic loss after the critical cluster formation resulting from first‐order phase transitions. © 2017 American Institute of Chemical Engineers AIChE J, 63: 18–28, 2018