Visualization and concentration measurement of a direct-injection hydrogen jet in a constant-volume vessel using spark-induced breakdown spectroscopy

In this work, spark-induced breakdown spectroscopy (SIBS) was employed to investigate the mixing process of a hydrogen jet in a constant-volume vessel. The local fuel concentration of the hydrogen jet was measured at several locations, using a SIBS sensor. A high-speed camera was used to visualize spark discharge fluctuations, and hydrogen jet concentration measurements were conducted simultaneously. Spectrally resolved atomic emissions from the plasma generated by the spark plug were examined to determine the local equivalence ratio. Direct visualization of the spark discharge provided useful information about the influence of spark discharge characteristics related to the spark timing. Using the developed SIBS sensor, atomic emission spectra were obtained from hydrogen H_α at 656 nm and nitrogen N (I) at 501 nm. Comparison of the intensity peaks of atomic emissions from hydrogen and nitrogen allows the local hydrogen concentration in a measured volume to be determined, and hence also the local equivalence ratio. The measurement results demonstrate the local variation in the equivalence ratio throughout the jet and along its axis. From the results, the spatial structure of the hydrogen jet affects the hydrogen/nitrogen mixing and could be clarified with SIBS technique when the spark is discharged.     

First and second law investigations of a new solar‐assisted thermodynamic cycle for triple effect refrigeration

This investigation is persuaded for the first and second law analyses of a new solar‐driven triple‐effect refrigeration cycle using Duratherm 600 oil (Duratherm Extended Life Fluid, NY, USA) as the heat transfer fluid is performed. The proposed cycle is an integration of ejector, absorption, and cascaded refrigeration cycles that could produce refrigeration output of different magnitude at different temperature simultaneously. Both exergy destruction and losses in each component and hence in the overall system are determined to identify the causes and locations of the thermodynamic imperfection. The effects of some influenced parameters such as hot oil outlet temperature, refrigerant turbine inlet pressure, and the evaporator temperature of ejector and cascaded refrigeration cycle have been observed on the first and second law performances. It is found that maximum irreversibility occurs in central receiver as 52.5% and the second largest irreversibility of 25% occurs in heliostat field. The second law efficiency of the solar driven triple effect refrigeration cycle is 2%, which is much lower than its first law efficiency of 11.5%. Analysis clearly shows that performance evaluation based on the first law analysis is inadequate and hence, more meaningful evaluation must be included in the second law analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Hybrid model of content extraction

We present a hybrid model for content extraction from HTML documents. The model operates on Document Object Model (DOM) tree of the corresponding HTML document. It evaluates each tree node and associated statistical features like link density and text distribution across the node to predict significance of the node towards overall content provided by the document. Once significance of the nodes is determined, the formatting characteristics like fonts, styles and the position of the nodes are evaluated to identify the nodes with similar formatting as compared to the significant nodes. The proposed hybrid model is derived from two different models, i.e., one is based on statistical features and other on formatting characteristics and achieved the best accuracy. We describe the validity of model with the help of experiments conducted on the standard data sets. The results revealed that the proposed model outperformed other existing content extraction models. We present a browser based implementation of the proposed model as proof of concept and compare the implementation strategy with various state of art implementations. We also discuss various applications of the proposed model with special emphasis on open source intelligence.     

An experimental investigation on the effects of exponential window and impact force level on harmonic reduction in impact-synchronous modal analysis

A novel method called Impact-synchronous modal analysis (ISMA) was proposed previously which allows modal testing to be performed during operation. This technique focuses on signal processing of the upstream data to provide cleaner Frequency response function (FRF) estimation prior to modal extraction. Two important parameters, i.e., windowing function and impact force level were identified and their effect on the effectiveness of this technique were experimentally investigated. When performing modal testing during running condition, the cyclic loads signals are dominant in the measured response for the entire time history. Exponential window is effectively in minimizing leakage and attenuating signals of non-synchronous running speed, its harmonics and noises to zero at the end of each time record window block. Besides, with the information of the calculated cyclic force, suitable amount of impact force to be applied on the system could be decided prior to performing ISMA. Maximum allowable impact force could be determined from nonlinearity test using coherence function. By applying higher impact forces than the cyclic loads along with an ideal decay rate in ISMA, harmonic reduction is significantly achieved in FRF estimation. Subsequently, the dynamic characteristics of the system are successfully extracted from a cleaner FRF and the results obtained are comparable with Experimental modal analysis (EMA).     

Chimie douce hydrogen production from Hg contaminated water,with desirable throughput,and simultaneous Hg-removal

Hydrogen's widespread use is fraught with many difficulties. The challenges currently are to do with safety concerns in gas storage and transportation, and low rate of production leading to non-viability of technologies at the point-of-use. Another global concern of immediate relevance involves heavy-metal ion pollution. Viable processes which can simultaneously remove and result in beneficiation of the contaminants are hitherto rarely reported. In this context we report a single-step, in situ co-reduction approach which has the dual advantage of (i) Hg contaminant removal, and (ii) room temperature hydrogen production. Hydrogen is produced via galvanic corrosion of in situ synthesized nanoaluminium amalgam. The production rate (720 mL/min for 0.5 g-Al salt) is far superior to what would be expected from the use of pure hydrides, and/or using bulk amalgams at room temperature. The method is simple, chimie douce (i.e soft chemical), hence potentially affordable, and capable of providing a means of beneficiating Hg contaminated water present in effluents from certain industries (for example, industries which uses chlor-alkali process). The in situ co-reduction approach helps in bypassing the usual rate limiting step which involves formation of an alumina passivation layer on hydrolytic material surface. Given the potential that exists in scale down and up, this approach offers a method to address the long standing challenge of point-of-use hydrogen availability.     

Experimental study of the natural organic matters effect on the power generation of reverse electrodialysis

In this paper, the effect of natural organic matters (NOMs), which are typically present in river and seawater, on the power generation of reverse electrodialysis was studied. Bovine serum albumin, humic acid, and sodium alginate were used as models of NOMs. A NOM model was added to concentrated salt water, diluted salt water, and/or both of them. Power density was used to measure the resulted power generation. Fourier transform infrared spectroscopy and scanning electron microscope were used to characterize the presence of NOMs on the membrane surfaces. The effect of NOMs on the generated power density was clearly observed. This effect was influenced by the NOM's type, the NOMs concentration, and the compartment in which NOMs are added. Fourier transform infrared spectroscopy and scanning electron microscope data confirmed that NOMs are deposited on both anion and cation exchange membrane surfaces. While all NOMs added to concentrated salt water did not influence the generated power density, different power density behavior was resulted from the different NOMs added to diluted salt water, where NOMs could increase or decrease or remain the generated power density. Thus, besides NOM's type, the salt concentration is very critical to determine the effect of NOMs on the generated power density. Copyright © 2017 John Wiley & Sons, Ltd.     

Retardation of High-Temperature Fuel Ash Corrosion of Fireside Boiler Tubes via Nanoparticles

The high-temperature corrosion rate of boiler tubes was studied as a function of inhibitor concentration, time, and temperature in the absence and presence of fuel ash. Samples of steel tubes were taken from boilers that operate in Northern Baghdad Station for Electric Power Generation. Fuel ash was collected from the boiler combustion chamber, as well. Normal and nano-MgO were used as a corrosion inhibitor in different mixing ratios. A weight loss technique was used to evaluate the corrosion rates, while scanning electron microscopy was used to study the surface morphology. It was seen that corrosion rates increased with both time and temperature, and decreased with the addition of inhibitors. The maximum inhibitor efficiency was 81 %, obtained via using nano-MgO at mixing weight ratio 2:1, 600 °C, and 10 h. The Presence of fuel ash had harmful effects on the steel surface.     

PSW statistical LSB image steganalysis

Multimedia Tools and Applications - Steganography is the art and science of producing covert communications by concealing secret messages in apparently innocent media, while steganalysis is the art...