(BETS)2[RuX5NO] (X = Cl, Br): An Explanation of Different Conductive Properties Through Structural and Spectroscopic Studies

For the development of new crystal and electronic structures in molecular conductors, dimeric tetrathiafulvalene (TTF) and tetraselenafulvalenes (TSFs)1–3 linked by single or double methyl antimony bridge(s) have been prepared and their neutral crystal structures have been investigated. The donor2 (cis-2) forms a metallic cation radical salt with tetracyanoquinodimethane (TCNQ) containing one-dimensional array interactions.     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

An analysis of lighting energy savings and switching frequency for a daylit corridor under various indoor design illuminance levels

Visual comfort and electric lighting energy issues are essential criteria to justify daylighting schemes. The evaluation of energy efficiency due to daylight linked lighting control systems is best demonstrated by case studies. This paper presents field measurements on daylighting for a fully air-conditioned daylit corridor. Artificial lighting load, brightness of the fluorescent luminaires, daylight availability for various switching illuminance levels were systematically recorded and analyzed. The general features and characteristics of the findings including the number of switching operations and electric-lighting energy savings are presented and discussed. Daylighting theories, using cumulative frequency distribution of outdoor illuminance and regression models based on brightness of light output, outdoor illuminance and electric light power to estimate daylight-linked lighting control savings, have been developed and assessed. It has been found that data from both approaches show reasonably good agreements with measured results. The findings from this study provide some operational and energy information, which would be useful and applicable to other interior spaces with similar architectural designs.     

Epitaxial growth of GaN on (0001) Al<Subscript>2</Subscript>O<Subscript>3</Subscript> via solution-cast seed layer formation process using Ga(mDTC)<Subscript>3</Subscript>

This paper reports an alternative method for the growth of GaN epitaxial layer on (0001) Al₂O₃ substrate by hot-wall vapor phase epitaxy technique. Tris (N,N-dimethyldithiocarbamato)-gallium (III), Ga(mDTC)₃ was introduced as a precursor material for the seed layer formation in the growth of GaN. Optimal growth conditions with seed layers formed by the Ga(mDTC)₃ concentration of 0.047 mol/L were identified: Growth temperature was found to be 850 °C, and optimal distance between the reactant outlet and substrate was determined to be 12.5 cm. Characterization results showed that this growth method produce high-crystallinity GaN epitaxial layers at a relatively lower growth temperature compared to the existing growth techniques and simplify the growth process.     

Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

Microstructure and mechanical properties relations for green bodies compacted from spray dried granules

Alumina granules from three binder systems were spray dried and pressed into bars at varied pressure. Granules are classified as strong, medium and weak as to reflect the different amount of poly(vinyl-butyral) binder and liquid paraffin plasticizer used in the binder system. Mechanical properties of the pressed bars were obtained from a four-point bend test and microstructures were examined using scanning electron microscopy SEM. Strengths and fracture toughnesses are found to increase as a function of compaction pressure, while the calculated effective flaw size is independent of the compaction pressure for all three granule types. Microstructural examination of fracture surfaces revealed that samples compacted at high pressure exhibited more transgranular fracture than samples compacted at low pressure. Evidently, higher pressure had increased the intergranular fracture resistance which correspondingly increased the fracture toughness of the pressed bars. For bars pressed from granules, green body strengths and toughnesses are strongly dependent on the cohesion between pressed granules and not on the effective processing flaw size.     

Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.