Nanotrenches Induced by Catalyst Particles on ZnSe Surfaces

Nanotrenches are induced by thermal annealing Au droplets on ZnSe surfaces. High-resolution scanning electron microscopy studies of the nanotrench structures reveal that the preferred migration directions of the catalyst droplets are along the direction family. On a ZnSe(111)B surface, each of the trenches is along one of the six directions while on a nonvicinal ZnSe(100) surface, the trenches are along a pair of antiparallel directions. Based on the results obtained from atomic force microscopy surface profiling and electron energy-loss spectroscopy chemical analysis techniques, a model is proposed to describe the possible formation mechanisms of the␣observed nanotrenches. The highly parallel nanotrenches induced on the Au/ZnSe(100) structure as revealed in this study are potentially useful as a template for in situ fabrication of ordered one-dimensional nanostructures (such as nanowires) of many materials.     

Temperature profile effects in accelerated thermal cycling of SnPb and Pb-free solder joints

Accelerated thermal cycling (ATC) has been widely used in the microelectronics industry for reliability assessment. ATC testing decreases life cycle test time by one or more of the following means: increasing the heating and cooling rate, decreasing the hold time, or increasing the range of the applied temperature. The relative effect of each of these cycle parameters and the failure mechanisms they induce has been the subject of many studies; however uncertainty remains, particularly regarding the role of the heating and cooling rate. In this research, three conditions with two ramp rates (14 °C/min and 95 °C/min) and two temperature ranges (ΔT = 0–100 °C and −40 to 125 °C) were applied to resistor 2512 and PBGA 256 test vehicles assembled with SnPb and Pb-free solders. The test results showed that the higher ramp rate reduced the testing time while retaining the same failure modes, and that the damage per cycle increased with the temperature difference. For the resistors, the Pb-free solder joints lasted longer than the SnPb joints at the smaller ΔT, but were inferior at the larger ΔT. In contrast, the Pb-free solder joints in the PBGA test vehicles lasted longer than the SnPb solder under both conditions.     

Optimization of photomask design for reducing aberration-induced placement error

In semiconductor manufacturing, the accurate placement of circuit components ensures the proper functioning of microelectronic circuits. This is often subject to photolithography, an optical technique that transfers circuit patterns from photomasks to silicon wafers. Sources of placement error include aberration and misalignment between different levels, and we focus on the former. Aberration is an optical phenomenon that often degrades imaging system performance. Since aberration differs from one imaging system to another, a photomask design that minimizes the aberration-induced placement error is desired. In this paper, we discuss the optimization process of a general one-dimensional mask pattern under a general illumination condition. The constraint is a known population mean of the root mean square aberrations for the imaging systems under consideration. To apply the theory, we search for the optimal parameters for two common mask designs: alternating phase-shifting masks (PSMs) and attenuated PSMs. The theoretical results are compared with those from a Monte Carlo analysis on a large set of imaging systems. These results are indicative to mask manufacturers and circuit designers of increasing manufacturability of circuits.     

Piezoelectric Nylon‐11 Nanowire Arrays Grown by Template Wetting for Vibrational Energy Harvesting Applications

Piezoelectric polymers, capable of converting mechanical vibrations into electrical energy, are attractive for use in vibrational energy harvesting due to their flexibility, robustness, ease, and low cost of fabrication. In particular, piezoelectric polymers nanostructures have been found to exhibit higher crystallinity, higher piezoelectric coefficients, and “self‐poling,” as compared to films or bulk. The research in this area has been mainly dominated by polyvinylidene fluoride and its copolymers, which while promising have a limited temperature range of operation due to their low Curie and/or melting temperatures. Here, the authors report the fabrication and properties of vertically aligned and “self‐poled” piezoelectric Nylon‐11 nanowires with a melting temperature of ≈200 °C, grown by a facile and scalable capillary wetting technique. It is shown that a simple nanogenerator comprising as‐grown Nylon‐11 nanowires, embedded in an anodized aluminium oxide (AAO) template, can produce an open‐circuit voltage of 1 V and short‐circuit current of 100 nA, when subjected to small‐amplitude, low‐frequency vibrations. Importantly, the resulting nanogenerator is shown to exhibit excellent fatigue performance and high temperature stability. The work thus offers the possibility of exploiting a previously unexplored low‐cost piezoelectric polymer for nanowire‐based energy harvesting, particularly at temperatures well above room temperature.     

Facile Synthesis of Red/NIR AIE Luminogens with Simple Structures,Bright Emissions,and High Photostabilities,and Their Applications for Specific Imaging of Lipid Droplets and Image‐Guided Photodynamic Therapy

Red/near‐infrared (NIR) fluorescent molecules with aggregation‐induced emission (AIE) characteristics are of great interest in bioimaging and therapeutic applications. However, their complicated synthetic approaches remain the major barrier to implementing these applications. Herein, a one‐pot synthetic strategy to prepare a series of red/NIR‐emissive AIE luminogens (AIEgens) by fine‐tuning their molecular structures and substituents is reported. The obtained AIEgens possess simple structures, good solubilities, large Stokes shifts, and bright emissions, which enable their applications toward in vitro and in vivo imaging without any pre‐encapsulation or ‐modification steps. Excellent targeting specificities to lipid droplets (LDs), remarkable photostabilities, high brightness, and low working concentrations in cell imaging application make them remarkably impressive and superior to commercially available LD‐specific dyes. Interestingly, these AIEgens can efficiently generate reactive oxygen species upon visible light irradiation, endowing their effective application for photodynamic ablation of cancer cells. This study, thus, not only demonstrates a facile synthesis of red/NIR AIEgens for dual applications in simultaneous imaging and therapy, but also offers an ideal architecture for the construction of AIEgens with long emission wavelengths.     

Highly Reliable Charge Trap-Type Organic Non-Volatile Memory Device Using Advanced Band-Engineered Organic-Inorganic Hybrid Dielectric Stacks

With the recent interest in data storage in flexible electronics, highly reliable charge trap-type organic-based non-volatile memory (CT-ONVM) has attracted much attention. CT-ONVM should have a wide memory window, good endurance, and long-term retention characteristics, as well as mechanical flexibility. This paper proposed CT-ONVM devices consisting of band-engineered organic–inorganic hybrid films synthesized via an initiated chemical vapor deposition process. The synthesized poly(1,3,5-trimethyl-1,3,5,-trivinyl cyclotrisiloxane) and Al hybrid films are used as a tunneling dielectric layer and a blocking dielectric layer, respectively. For the charge trapping layer, different Hf, Zr, and Ti hybrids are examined, and their memory performances are systematically compared. The best combination of hybrid dielectric stacks showed a wide memory window of 6.77 V, good endurance of up to 10⁴ cycles, and charge retention of up to 71% after 10⁸ s even under the 2% strained condition. The CT-ONVM device using the hybrid dielectric stacks outperforms other organic-based charge trap memory devices and is even comparable in performance to conventional inorganic-based poly-silicon/oxide/nitride/oxide/silicon structures devices. The CT-ONVM using hybrid dielectrics can overcome the inherent low reliability and process complexity limitations of organic electronics and expedite the realization of wearable organic electronics.     

Potential pitfalls of smart city development: A study on parking mobile applications (apps) in Hong Kong

Smart cities are built upon information and communication technologies (ICTs) to enable a broad range of advanced services. Through a comprehensive literature review, this study identified four pitfalls brought by the pervasive application of ICT, including information insecurity, privacy leakage, information islands, and digital divide. Therefore, a questionnaire survey together with 27 interviews was conducted in Hong Kong to investigate how the public perceived these pitfalls within the context of mobile apps providing real-time parking information which form a major part of smart mobility. System insecurity and privacy leakage were found to arouse worries among the app-users while their awareness of protecting personal data was found to have room for improvement. Islands of real-time parking information occur as a result of the lack of collaboration among private carpark operators. Digital divide existed widely among the disadvantaged groups and the problem cannot be solved by mere provision of ICT facilities. Overall, technologies alone cannot make a city smart or smarter. It is the suitable way in which ICTs are used to serve all citizens that matters.     

Outage Probability with Correlated Lognormal Interferers using Log Shifted Gamma Approximation

The computation of outage probability in cellular radio system has been extensively studied. The Signal-to-Interference-plus-Noise Ratio (SINR) distribution involves the sum of lognormal distributions due to dominant effect of shadowing in both the signal and interference components. Since no closed-form expression can be found for the sum of lognormal distributions, many approximation methods and bounds were proposed in the past. In this paper, Log Shifted Gamma (LSG) approximation is proposed to calculate the sum of correlated lognormal random variables (RVs), hence the outage probability, accurately with a wide range of dB spreads, number of interferers M, correlation coefficients r among interference components, and noise power N. Overall, LSG approximation shows consistent accuracy due to its flexibility over the classical lognormal approximation, especially with small correlation coefficients r and/or large dB spreads.     

Binary-Code-Allocation Scheme in DS-CDMA Systems

In this paper, we consider a simple binary-transmitter adaptation in direct-sequence code-division multiple-access systems. We propose a binary-code-allocation scheme for reducing the multiple-access interference (MAI). In this scheme, a user is given an orthogonal binary sequence set. By choosing a better sequence from the sequence set, the user can maximize his/her signal to interference ratio. We examine the scheme analytically by both exact analysis and approximation in equal-power synchronous cases. Theoretically, it is found that the scheme can significantly reduce the MAI. It only involves a few bits of feedback information for the transmitter to adjust the sequences. The scheme can also be modified for multiuser adaptation in asynchronous channels. In a multiuser adaptation, simulations show that the users would have a significantly improved performance against the MAI, and the system throughput can also be increased. It is shown that this binary-code-allocation scheme is a simple, widely applicable, and robust binary-sequence-adaptation scheme     

Soluble processed low-voltage and high efficiency blue phosphorescent organic light-emitting devices using small molecule host systems

We report low voltage driving and highly efficient blue phosphorescence organic light emitting diodes (PHOLEDs) fabricated by soluble process. A soluble small molecule mixed host system consisting of hole transporting 4,4’,4’’ tris(N-carbazolyl)triphenylamine (TCTA) and bipolar carrier transporting 2,6-bis(3-(carbazol-9-yl)phenyl)pyridine (26DCzPPy) exhibits high solubility with smooth surface properties. Moreover, this small molecule host shows the smoothest morphological property similar to a vacuum deposited amorphous film. A low driving voltage of 5.4 V at 1000 cd/m² and maximum external quantum efficiency 14.6% obtained in the solution processed blue PHOLEDs are useful for large area low cost manufacturing.