Toward emotional interactive videogames for children with autism spectrum disorder

Universal Access in the Information Society - Technology and videogames have been proven as motivating tools for working attention and complex communication skills, especially in children with...     

Time-domain Analysis of Laboratory Experiments on the Transient Pressure Damping in a Leaky Polymeric Pipe

Water Resources Management - The pressure damping occurring in pressurized pipes with a leak during transients has been examined as a diagnostic tool – the so-called transient damping method...     

High-voltage surge protection by a varistor-filled air gap

The electric discharge across a varistor granule filled air gap under a fast-rising voltage pulse was investigated for surge protection applications. The effects of temperature and pressure on the arc and the electrical conduction were analyzed by the characteristic changes in voltage waveforms triggered by a fast-rising high voltage pulse. In addition to the gap size, experimental results show that competing mechanisms among arc conduction, conduction through the varistor granule network, thermionic emission from Joule heating at granule-to-granule contact points, and the magnitude of the switching voltage dictate the maximum surge protection voltage for the filled air gap. Experimental evidence indicated that accumulated degradation was created at small contact points between varistor granules by repetitive assaults from longer duration, high voltage pulses. The uniqueness of using varistor over other dielectric granules in an air gap for surge protection is identified and discussed.     

Ultra-low noise front-end electronics for air-coupled ultrasonic non-destructive evaluation

Air-coupled ultrasonic inspection has been demonstrated to be a non-contact method of great interest in non-destructive evaluation (NDE) applications. The absence of direct contact or a liquid couplant provides this technique very attractive benefits in front of the well-known and well-developed liquid-coupled ultrasonic inspection systems. A wide range of defects can be detected by means of ultrasound coupled to and harvested from the specimen in absence of contact when using appropriate transducers designed for their operation in air.This paper presents an easy way to integrate air-coupled piezoelectric transducers in conventional ultrasonic NDE equipment. The design of a specific front-end electronics by using an ultra-low noise amplifier enables existing inspection systems to be used for the dry-coupled ultrasonic test of materials and structures. The amplifier provides the receiver with a signal-to-noise ratio large enough for good quality signal processing and imaging. System dynamic ranges of more than 100 dB are achieved.     

Machining characteristics and fracture morphologies in a copper-beryllium (Cu-2Be) alloy

The technology of materials removal is improved greatly by the introduction of advanced cutting tools like cubic boron nitride, ceramics, polycrystalline diamond and the more recent whisker-reinforced materials. In this paper, the influence of cutting temperature on machinability, mechanical properties, microstructure, and fracture morphology of Cu-2Be alloy using a polycrystalline diamond cutter is investigated. The information on machining, microstructure, and fracture morphology of Cu-2Be alloy are very useful to understand their fabrication characteristics and the basic mechanisms of its deformation and fracture. The machinability (in terms of surface finish) of Cu-2Be alloy is evaluated as a function of cutting temperature, resulting from wet and dry cutting. Machining is carried out on a Hardinge Cobra 42 CNC machine (Hardinge Inc., Elmira, NY), and the machining parameters used—cutting speed, depth of cut, and feed rate—are kept constant during both wet and dry cutting. The machined surface finish on Cu-2Be alloy is measured using a surface finish analyzer (Surftest 401, series 178) technique. The machined specimens are examined for their strength and hardness properties using a standard Universal Testing Machine and Rockwell hardness tester, respectively. Wet cutting (using coolants) produced a smooth surface finish when compared with dry cutting of the Cu-2Be alloy. The machined specimens are examined for their microstructural features using a Nikon optical microscope. The specimens are etched using a suitable etchant solution for revealing such microstructure constituents as grain size, phase proportions, and the possible overheated areas (especially in dry cutting). The fractured surfaces from the tensile and impact toughness tests are investigated for their fracture morphologies (dry and wet cutting) using a microprocessor-controlled scanning electron microscope (Jeol Model JSM 5910 LV). A detailed analysis is also made to understand and interpret the basic fracture mechanisms responsible for crack initiation and crack propagation. The Cu-2Be alloy showed relatively higher mechanical properties in wet cutting in comparison to dry cutting operations. Fracture studies demonstrated intergranular and ductile fractures as dominant modes of fracture mechanisms in Cu-2Be alloy.     

Confirmation Bias in Online Searches: Impacts of Selective Exposure Before an Election on Political Attitude Strength and Shifts

Impacts of Internet use on political information seeking and subsequent processes have been subject to much debate. A 2‐session online field study presented online search results on political topics to examine selective exposure and its attitudinal impacts. Session 1 captured attitudes, including their accessibility. Session 2 tracked what online search results participants selected and how long they read them; participants then reported attitudes again. The study represented a 4x8x2x2 within‐subjects design: 4 topics, 8 browsing intervals each, with articles presenting opposing stances, with low versus high source credibility. Attitude‐consistent messages and messages from high‐credibility sources were preferred. Exposure to attitude‐consistent search results increased attitude accessibility and reinforced attitudes, whereas exposure to attitude‐discrepant content had opposite effects, regardless of messages' source credibility.     

Bribery in voting with CP-nets

We investigate the computational complexity of finding optimal bribery schemes in voting domains where the candidate set is the Cartesian product of a set of variables and voters use CP-nets, an expressive and compact way to represent preferences. To do this, we generalize the traditional bribery problem to take into account several issues over which agents vote, and their inter-dependencies. We consider five voting rules, three kinds of bribery actions, and five cost schemes. For most of the combinations of these parameters, we find that bribery in this setting is computationally easy.     

HPC on the Grid: The Theophys Experience

The Grid Virtual Organization (VO) “Theophys”, associated to the INFN (Istituto Nazionale di Fisica Nucleare), is a theoretical physics community with various computational demands, spreading from serial, SMP, MPI and hybrid jobs. That has led, in the past 20 years, towards the use of the Grid infrastructure for serial jobs, while the execution of multi-threaded, MPI and hybrid jobs has been performed in several small-medium size clusters installed in different sites, with access through standard local submission methods. This work analyzes the support for parallel jobs in the scientific Grid middlewares, then describes how the community unified the management of most of its computational need (serial and parallel ones) using the Grid through the development of a specific project which integrates serial e parallel resources in a common Grid based framework. A centralized national cluster is deployed inside this framework, providing “Wholenodes” reservations, CPU affinity, and other new features supporting our High Performance Computing (HPC) applications in the Grid environment. Examples of the cluster performance for relevant parallel applications in theoretical physics are reported, focusing on the different kinds of parallel jobs that can be served by the new features introduced in the Grid.