Nanostructured supported palladium catalysts—Non-oxidative methane coupling

The Pd on α-Al₂O₃ catalysts with Pd particles in the low nanometer range have been prepared by a sonochemical reduction and a colloidal method, respectively. The two catalysts differ in their particle size, the widths of their particle size distributions and the amount of carbon incorporation in the Pd lattice.The adsorptive properties of the Pd/Al₂O₃ samples are different as a result of the different preparation methods. The methane adsorption capacity of that sample with smaller particles is lower than that of the catalyst with larger particles and the energy of activation is nearly doubled. DRIFTS and TPD results of CO adsorption supported by transmission electron microscopy data indicate that the PdSON catalyst with smaller and more homogeneous particles than PdCOL is highly dispersed which influences the coupling-hydrogenolysis process.The catalytic activity evidenced the formation of different adspecies during methane coupling and chemisorption on both catalysts. During the hydrogenation the carbon adspecies formed mainly methane at low adsorption temperatures. The significant amount of adsorbed methane at 773 K is governed by the highly active coordination unsaturated sites at the surface.     

Synthesis of Novel Niobium Aluminide-Based Composites

A reactive sintering process has been used to produce almost fully dense composites with interpenetrating networks of NbAl₃ and Al₂O₃. The process involves the reaction synthesis of niobium aluminides and Al₂O₃ from compacts of intensively milled aluminum and Nb₂O₅ powder mixtures. During carefully controlled heating under an inert atmosphere, the oxide reduction by aluminum to form niobium aluminides and Al₂O₃ proceeds at temperatures below the melting point of aluminum. At temperatures of >1000°C, the reaction-formed niobium aluminides and Al₂O₃ sinter. The present paper discusses processing parameters, such as attrition milling, the heating cycle, and the metal:ceramic ratio in the starting mixture, that control microstructure development and mechanical properties.     

Micro RNA-124a Regulates Lipolysis via Adipose Triglyceride Lipase and Comparative Gene Identification 58

Lipolysis is the biochemical pathway responsible for the catabolism of cellular triacylglycerol (TG). Lipolytic TG breakdown is a central metabolic process leading to the generation of free fatty acids (FA) and glycerol, thereby regulating lipid, as well as energy homeostasis. The precise tuning of lipolysis is imperative to prevent lipotoxicity, obesity, diabetes and other related metabolic disorders. Here, we present our finding that miR-124a attenuates RNA and protein expression of the major TG hydrolase, adipose triglyceride lipase (ATGL/PNPLA2) and its co-activator comparative gene identification 58 (CGI-58/ABHD5). Ectopic expression of miR-124a in adipocytes leads to reduced lipolysis and increased cellular TG accumulation. This phenotype, however, can be rescued by overexpression of truncated Atgl lacking its 3''UTR, which harbors the identified miR-124a target site. In addition, we observe a strong negative correlation between miR-124a and Atgl expression in various murine tissues. Moreover, miR-124a regulates the expression of Atgl and Cgi-58 in murine white adipose tissue during fasting as well as the expression of Atgl in murine liver, during fasting and re-feeding. Together, these results point to an instrumental role of miR-124a in the regulation of TG catabolism. Therefore, we suggest that miR-124a may be involved in the regulation of several cellular and organismal metabolic parameters, including lipid storage and plasma FA concentration.     

Mitochondrial Mechanisms in Septic Cardiomyopathy

Sepsis is the manifestation of the immune and inflammatory response to infection that may ultimately result in multi organ failure. Despite the therapeutic strategies that have been used up to now, sepsis and septic shock remain a leading cause of death in critically ill patients. Myocardial dysfunction is a well-described complication of severe sepsis, also referred to as septic cardiomyopathy, which may progress to right and left ventricular pump failure. Many substances and mechanisms seem to be involved in myocardial dysfunction in sepsis, including toxins, cytokines, nitric oxide, complement activation, apoptosis and energy metabolic derangements. Nevertheless, the precise underlying molecular mechanisms as well as their significance in the pathogenesis of septic cardiomyopathy remain incompletely understood. A well-investigated abnormality in septic cardiomyopathy is mitochondrial dysfunction, which likely contributes to cardiac dysfunction by causing myocardial energy depletion. A number of mechanisms have been proposed to cause mitochondrial dysfunction in septic cardiomyopathy, although it remains controversially discussed whether some mechanisms impair mitochondrial function or serve to restore mitochondrial function. The purpose of this review is to discuss mitochondrial mechanisms that may causally contribute to mitochondrial dysfunction and/or may represent adaptive responses to mitochondrial dysfunction in septic cardiomyopathy.     

Crystal violet dye sorption and transport in/through biobased PVA cryogel membranes

Cryogels based on poly(vinyl alcohol) [PVA] and three types of bioinsertions such as scleroglucan, cellulose microfibers, and zein, respectively, have been prepared using capacity of PVA to crosslink by repeated freezing–thawing cycles. The effect of the incorporation of biopolymers on the properties of PVA cryogel has been studied by using several techniques such as: scanning electron microscopy, differential scanning calorimetry, and Fourier transform infrared studies. The obtained biobased cryogel membranes were subjected to sorption and to diffusion experiments using Crystal Violet (CV), a dye commonly used in the textile industry and in medicine. Image analysis with CIELAB system was used both to monitor the cryogels loading with CV and to gain insight in the dye state into the gel, in correlation with the bioinsertion type and gels morphology. Dye diffusion but also sorption capacity of the cryogels was found to be closely related to the type of biopolymer. In this article the equilibrium (sorption isotherms) and transport properties (diffusion and permeability coefficients) of CV, in/through physical cross‐linked PVA hydrogel membranes with bioinsertions has been reported. The highest efficiency for the CV removal from aqueous solutions was obtained for the PVA/Scl cryogels. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41838.     

Synthesis and Antiplasmodial Activity of Novel Chloroquine Analogues with Bulky Basic Side Chains

Chloroquine is commonly used in the treatment and prevention of malaria, but Plasmodium falciparum, the main species responsible for malaria‐related deaths, has developed resistance against this drug. Twenty‐seven novel chloroquine (CQ) analogues characterized by a side chain terminated with a bulky basic head group, i.e., octahydro‐2H‐quinolizine and 1,2,3,4,5,6‐hexahydro‐1,5‐methano‐8H‐pyrido[1,2‐a][1,5]diazocin‐8‐one, were synthesized and tested for activity against D‐10 (CQ‐susceptible) and W‐2 (CQ‐resistant) strains of P. falciparum. Most compounds were found to be active against both strains with nanomolar or sub‐micromolar IC₅₀ values. Eleven compounds were found to be 2.7‐ to 13.4‐fold more potent than CQ against the W‐2 strain; among them, four cytisine derivatives appear to be of particular interest, as they combine high potency with low cytotoxicity against two human cell lines (HMEC‐1 and HepG2) along with easier synthetic accessibility. Replacement of the 4‐NH group with a sulfur bridge maintained antiplasmodial activity at a lower level, but produced an improvement in the resistance factor. These compounds warrant further investigation as potential drugs for use in the fight against malaria.     

Identification of Aminoimidazole and Aminothiazole Derivatives as Src Family Kinase Inhibitors

Src family kinases (SFKs) are a family of non‐receptor tyrosine kinases (TKs) implicated in the regulation of many cellular processes. The aberrant activity of these TKs has been associated with the growth and progression of cancer. In particular, c‐Src is overexpressed or hyperactivated in a variety of solid tumors and is most likely a strong promoting factor for the development of metastasis. Herein, the synthesis of new 4‐aminoimidazole and 2‐aminothiazole derivatives and their in vitro biological evaluation are described for their potential use as SFK inhibitors. Initially, 2‐aminothiazole analogues of dasatinib and 4‐aminoimidazole derivatives were synthesized and tested against the SFKs Src, Fyn, Lyn, and Yes. Five hits were identified as the most promising compounds, with K_i values in the range of 90–480 nm . A combination of molecular docking, homology modeling, and molecular dynamics were then used to investigate the possible binding mode of such compounds within the ATP binding site of the SFKs. Finally, the antiproliferative activities of the best candidates were evaluated against SH‐SY5Y and K562 cell lines. Compound 3 b [2‐(4‐{2‐methyl‐6‐[(5‐phenylthiazol‐2‐yl)amino]pyrimidin‐4‐yl}piperazin‐1‐yl)ethanol] was found to be the most active inhibitor.     

Semiconducting polyurethane/polypyrrole/polyaniline for microorganism immobilization and wastewater treatment in anaerobic/aerobic sequential packed bed reactors

The development of new materials for microorganism immobilization is very important in wastewater treatment. In this work polyurethane (PU) foams were modified polymerizing pyrrole and aniline onto their surface by chemical oxidization to obtain polyurethane/polypyrrole (PU/PPy), polyurethane/polyaniline (PU/PANI), and PU/(PPy‐co‐PANI) supports which were used to immobilize microorganisms for municipal wastewater treatment in batch mode and continuous flow using two sequential (anaerobic/aerobic) packed bed reactors (PBR) varying the total hydraulic retention time (HRT). The supports were characterized by Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) and tested in chemical oxygen demand (COD) removal during treatment of a municipal wastewater. It was observed from SEM analysis that globular nanostructures of PPy and PPy‐co‐PANI were formed onto the PU surface with average diameters between 100 and 300 nm, which are typical of aqueous polymerization of pyrrole monomer; however irregular nanostructures were observed when PANI was homopolymerized onto the PU foam. Batch wastewater treatment after 14 days showed COD removal efficiencies of 77%, 69%, 78%, and 80% for PU foam, PU/PPy, PU/PANI, and PU/(PPy‐co‐PANI), respectively; which was explained as a function of polymers morphology deposited onto the PU foam surface. Also it was observed from the sequential PBR that for 24 h and 36 h of HRT, 80 and 90% of COD removal can be achieved; respectively.© 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42242.     

Neural network modeling of the preparation process of a siloxane‐organic polyazomethine

Although apparently simple, the polycondensation reaction leading to polyazomethine is difficult to control because of its equilibrium character, the conversion degree being influenced by a series of parameters. The reaction between a siloxanediamine, 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane, and terephthalaldehyde was performed here in solution (in tetrahydrofuran) without by‐products removal and in absence of any catalyst or pH modifier. Different conditions (co‐monomers ratio, dilution, and temperature), considered as input parameters for the process modeling, were varied according to a pre‐established experimental program. The viscosity of the reaction mixture was chosen as output parameter, being monitored with a Haake Viscotester 7 Plus‐L. The process modeling was performed using a hybrid combination of artificial neural networks and differential evolution algorithm, the last one having the role of developing the neural model in an optimal form. The simulation results showed that the methodology provides accurate results, the model predictions being in close correlation with the experimental data. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42552.