Joint spectrum and power optimization in the design of the UMTS satellite component

The paper provides a power and spectrum joint analysis of the universal mobile telecommunications system (UMTS) satellite component, based on the wideband code division multiple access (W‐CDMA) air interface. In fact, power and spectral efficiency may become highly conflicting requirements in a satellite system and a trade‐off analysis is needed to drive a proper dimensioning of the satellite. The proposed approach allows a dimensioning of the satellite component either in terms of orbit and power budget or in terms of additional capacity for the terrestrial section, for specified orbit and power limitations. The impact of candidate frequency bands, orbit type and diversity on both spectral and power requirements of the satellite component is evaluated. For given traffic requirements, power‐vs‐spectrum trade‐off is proposed which ensures a proper resources utilization. The efficiency evaluation accounts for: beams overlapping, ortho gonality, voice activity factor, diversity and cross‐polarization frequency reuse. Perfect power control is assumed and the effect of the excess power required by the shadowed users is accounted for in the interference calculation. Furthermore, still in the frame of a proper resource exploitation, a possible optimization of capacity through the use of unpaired bands in the two link directions is analysed. Copyright © 2001 John Wiley & Sons, Ltd.     

Selective Exposure and Reinforcement of Attitudes and Partisanship Before a Presidential Election

Right before the 2008 U.S. presidential election, this 2‐session online field study examined consequences of selective exposure to political messages on accessibility of attitudes and of partisanship. In the first session, participants indicated attitudes toward political issues and their partisanship, which allowed measuring accessibility of attitudes and of partisanship. In the second session, participants browsed articles. Four issues were covered by 8 articles, with 2 articles featuring opposing perspectives. Selective exposure was unobtrusively logged. Finally, participants completed measures for attitudes and partisanship again. Selective exposure to attitude‐consistent articles was linked to greater attitude accessibility. The indirect impact of selective exposure on partisanship accessibility through attitude accessibility was significant.     

Experimental Study of an Adding Interferometer at Millimeter Waves

In order to study an original detection architecture for future cosmology experiments based on wide band adding interferometry, we have tested a single baseline bench instrument based on commercial components. The instrument has been characterized in the laboratory with a wide band power detection setup. A method which allows us to reconstruct the complete transfer function of the interferometer has been developed and validated with measurements. This scheme is useful to propagate the spurious effects of each component till the output of the detector.     

Long‐Term Electrical and Mechanical Function Monitoring of a Human‐on‐a‐Chip System

The goal of human‐on‐a‐chip systems is to capture multiorgan complexity and predict the human response to compounds within physiologically relevant platforms. The generation and characterization of such systems is currently a focal point of research given the long‐standing inadequacies of conventional techniques for predicting human outcome. Functional systems can measure and quantify key cellular mechanisms that correlate with the physiological status of a tissue, and can be used to evaluate therapeutic challenges utilizing many of the same endpoints used in animal experiments or clinical trials. Culturing multiple organ compartments in a platform creates a more physiologic environment (organ–organ communication). Here is reported a human 4‐organ system composed of heart, liver, skeletal muscle, and nervous system modules that maintains cellular viability and function over 28 days in serum‐free conditions using a pumpless system. The integration of noninvasive electrical evaluation of neurons and cardiac cells and mechanical determination of cardiac and skeletal muscle contraction allows the monitoring of cellular function, especially for chronic toxicity studies in vitro. The 28‐day period is the minimum timeframe for animal studies to evaluate repeat dose toxicity. This technology can be a relevant alternative to animal testing by monitoring multiorgan function upon long‐term chemical exposure.     

Impact of “terminal effect” on Cu electrochemical deposition: Filling capability for different metallization options

The 300 mm wafer copper electrochemical deposition (ECD) process for dual damascene metallization of semiconductor advanced interconnects is critically reviewed and the breakthroughs that enable further scaling of this process are examined. Special emphasis is placed on analyzing the critical issues, such as barrier/seed options, terminal effect and future plating prospects for this technology. The smallest plateable feature size values are estimated for different metallization integration schemes, such as conventional Physical Vapor Deposited (PVD) TaN/Ta/Cu, hybrid RuTa/Cu, CuMn (8%) self-forming barrier/seed, and Plasma-Enhanced Atomic Layer Deposition (PEALD) Ru, limiting the allowed maximum sheet resistance to 14 Ohms/sq for the Cu-based seeds and the effective maximum filling aspect ratio to 5-6.     

EXAFS as Powerful Analytical Tool for the Investigation of Organic–Inorganic Hybrid Materials

The potential and application of X‐ray absorption spectroscopy (XAS) for structural investigations of organic–inorganic hybrid materials, with a special emphasis on systems consisting of inorganic building blocks (clusters) embedded into polymer backbones, is extensively reviewed. In the first part of the paper, the main features of organic–inorganic hybrid materials, their classification, the synthetic approaches for their preparation, and their applications are concisely presented, whereas the particular issues related to their characterization are discussed in more detail. In the second section of the paper, the principles and the theoretical background of the XAS method, including experimental design, data reduction, evaluation, analysis, and interpretation are described and discussed. Examples of potentialities of the method for the short‐range structural investigation of inorganic nanostructures in hybrids are provided, and the state‐of‐the‐art in the field of hybrid materials is reviewed. In the third part, six different case studies belonging to our past and present experience in this field are presented and discussed, with a particular focus on their XAS investigation.     

A Roadmap for Controlled and Efficient n‐Type Doping of Self‐Assisted GaAs Nanowires Grown by Molecular Beam Epitaxy

N‐type doping of GaAs nanowires has proven to be difficult because the amphoteric character of silicon impurities is enhanced by the nanowire growth mechanism and growth conditions. The controllable growth of n‐type GaAs nanowires with carrier density as high as 10²⁰ electron cm^?3 by self‐assisted molecular beam epitaxy using Te donors is demonstrated here. Carrier density and electron mobility of highly doped nanowires are extracted through a combination of transport measurement and Kelvin probe force microscopy analysis in single‐wire field‐effect devices. Low‐temperature photoluminescence is used to characterize the Te‐doped nanowires over several orders of magnitude of the impurity concentration. The combined use of those techniques allows the precise definition of the growth conditions required for effective Te incorporation.     

A metaheuristic-based downlink power allocation for LTE/LTE-A cellular deployments

The explosive growth of cellular networks makes their deployment and maintenance more and more complex, time consuming, and expensive. Self-Organizing Networks have been recognized as a promising way to alleviate this problem by minimizing human intervention in such processes. This paper introduces a novel multiobjective framework, based on evolutionary optimization, aiming at improving network performance and users Quality of Service. By tuning the transmitted power at each cell, average intercell interference levels are minimized. The design of the proposed scheme is feasible for distributed implementations in Long Term Evolution (LTE) and LTE-Advanced networks and its operation is compatible with current specifications. The framework is able to provide effective network-specific optimization and obtained results show that gains in terms of network capacity and cell edge performance are 5 and 10 %, respectively. Energy savings always accompanied such enhancements with reductions up to 35 %.     

Polymer electrolyte membrane fuel cell contamination: Testing and diagnosis of toluene-induced cathode degradation

The effects of toluene contamination on the performance of polymer electrolyte membrane (PEM) fuel cells were investigated, using various levels of toluene concentration in the air streams, under different operational conditions and with different catalyst loadings. Constant-current polarization and electrochemical impedance spectroscopy (EIS) were conducted to analyze the poisoning behaviour of toluene. The severity of the contamination effect increased with an increase in both the current density and the toluene concentration, but decreased with an increase in both the relative humidity (RH) and the cathode-side Pt loading. The toluene-poisoned fuel cell could not be fully recovered by replacing toluene-contaminated air with pure air. EIS measurements revealed that both kinetic resistance and mass transfer resistance increased as a result of toluene contamination, while membrane resistance remained unchanged. However, the increase in kinetic resistance was a major contributor to cell performance degradation.     

Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy

The thermoacoustic effect of isolated single‐wall carbon nanotubes aligned between electrodes is experimentally observed for the first time by imaging the emitted acoustic wave using an atomic force microscopy‐based technique specifically developed for the task. The capability of such a technique for single‐point thermoacoustic measurements is first verified on carbon nanotubes layers with two electrodes for injecting alternate electric current. The technique is then demonstrated to allow the acquisition, simultaneously with the topography, of images reflecting the pressure of the acoustic wave at fixed distance from the sample. Such a capability is used to collect images reflecting the amplitude of acoustic waves generated by isolated nanotubes and nanotube bundles by the thermoacoustic effect.