Spin-Wave Optics in YIG Realized by Ion-Beam Irradiation

Direct focused-ion-beam writing is presented as an enabling technology for realizing functional spin-wave devices of high complexity, and demonstrate its potential by optically-inspired designs. It is shown that ion-beam irradiation changes the characteristics of yttrium iron garnet films on a submicron scale in a highly controlled way, allowing one to engineer the magnonic index of refraction adapted to desired applications. This technique does not physically remove material, and allows rapid fabrication of high-quality architectures of modified magnetization in magnonic media with minimal edge damage (compared to more common removal techniques such as etching or milling). By experimentally showing magnonic versions of a number of optical devices (lenses, gratings, Fourier-domain processors) this technology is envisioned as the gateway to building magnonic computing devices that rival their optical counterparts in their complexity and computational power.     

Aeration and gutter water levels in siphonic roof drainage systems

An investigation is presented into how negative system pressures, the degree of aeration, and gutter water levels are affected by the number of outlets in a siphonic roof drainage system. The experimental results show that system pressures decrease if outlets are blocked. It is also shown that the depth of water above an outlet is strongly influenced by the negative pressure acting at the outlet. As the suction effect at the outlet increases, due to lower system pressures, more water and air will be drawn into the outlets and this will result in a corresponding increase in overall gutter water depth. The results also show that there is often built-in redundancy in multiple outlet siphonic systems experiencing lower-intensity rainfall events, and if one or two outlets were blocked, the system would still operate satisfactorily. A new outlet suppressor was trialled and this was shown to reduce gutter water levels by up to 58% at some positions in the gutter.

Il est présenté une enquête sur la manière dont les pressions négatives dans le système concerné, le degré d'aération et les niveaux d'eau dans les chéneaux sont affectés par le nombre d'orifices de sortie dans un système d'écoulement des eaux de toit par siphonnage. Les résultats expérimentaux montrent que les pressions dans le système diminuent si des orifices de sortie sont obturés. Il est également montré que la profondeur de l'eau au-dessus d'un orifice de sortie est fortement influencée par la pression négative s'exerçant à l'orifice de sortie. Plus l'effet de succion à l'orifice de sortie augmente, en raison des pressions plus faibles dans le système, et plus les quantités d'air et d'eau entraînées dans les orifices de sortie seront importantes, et cela aura pour résultat une augmentation correspondante de la profondeur générale de l'eau dans les chéneaux. Les résultats montrent également qu'il existe souvent une redondance intégrée dans les systèmes à siphons comportant des orifices de sortie multiples et soumis à des épisodes pluvieux de faible intensité, et que si un ou deux orifices de sortie sont obturés, le système fonctionne encore de manière satisfaisante. Un nouvel obturateur d'orifice de sortie a été essayé, ce qui a permis de montrer que celui-ci réduit dans une proportion allant jusqu'à 58 % en certains points les niveaux d'eau dans les chéneaux.

Mots clés: aération, niveaux d'eau dans les chéneaux, pressions négatives, écoulement des eaux de toit par siphonnage     

Increased conversion efficiency in cadmium telluride photovoltaics by luminescent downshifting with quantum dot/poly(methyl methacrylate) films

Commercially available quantum dots have been encapsulated in a poly(methyl methacrylate) film and used as a luminescent downshifting layer on cadmium sulfide/cadmium telluride photovoltaic devices. Application of these films has resulted in a relative improvement to the short‐circuit current of over 4% by I–V measurement, with a significant increase in the contribution of short‐wavelength light resulting in 25% of the current available in this part of the spectrum being captured. The films have been shown to be highly scattering and the associated difficulties this provides to external quantum efficiency measurements have been discussed. A range of optical characterisation techniques, particularly laser beam induced current, have been used to probe the effect the films have on a cadmium sulfide/cadmium telluride device. An alternate methodology for performing external quantum efficiency measurements with the quantum dot films has been proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

The effect of average soft segment length on morphology and properties of a series of polyurethane elastomers. I. Characterization of the series

A series of eight thermoplastic polyurethane elastomers were synthesized from 4,4′-methylene diphenyl diisocyanate (MDI) and 1,4-butanediol (BDO) chain extender, with poly(hexamethylene oxide) (PHMO) macrodiol soft segments. The soft segment molecular weights employed ranged from 433 g/mol to 1180 g/mol. All materials contained 60% (w/w) of the soft segment macrodiol. Differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), wide angle x-ray diffraction (WAXD), and small angle x-ray scattering (SAXS) techniques were employed to characterize morphology. Tensile and Shore hardness tests were also performed. Materials were tested in the annealed state. It was found that an increase in segment length was accompanied by an increase in the degree of microphase separation, average interdomain spacing, hard domain order, hardness, stiffness, and opacity. DSC experiments showed the existence of several hard segment melting regions that were postulated to result from the disordering or melting of various hard segment length populations. For the system and composition ratio employed, it was found that optimum tensile properties (UTS and breaking strain) were achieved when a PHMO molecular weight of between 650 and 850 was utilized. © 1996 John Wiley & Sons, Inc.     

The effect of compatibilization on the behavior of a polycarbonate/polymer liquid crystal blend

Polymer liquid crystalline materials (PLC) blended with engineering plastics (EP) have the potential to reduce viscosity and increase the modulus of the EP, particularly if the PLC is in a favorable fibrillar morphology. A major deficiency in these blends—as with many other immiscible polymeric systems—is poor failure properties. In this paper, polycarbonate (PC) and a rigid, all-aromatic commercial PLC are blended and a third resin, a copolymer of methyl methacrylate and N-methyl-dimethyl-glutarimide is included as a compatibilizing agent. Characterization of the binary and ternary blends is carried out using rheological, mechanical, morphological, and dynamic mechanical characterization techniques. Binary blends of PLC in a PC matrix result in an immiscible, nodular morphology with low failure stresses. The addition of the copolymeric compatibilizer—particularly one with reactive functionalities—is found to improve tensile strength and yield a fibrillar blend morphology. It is proposed that this may be due to the compatibilizer reducing interfacial tension and adhering to the blend phases, rather than by causing a major change in blend viscosity.     

Fast multilevel implementation of recursive spectral bisection for partitioning unstructured problems

If problems involving unstructured meshes are to be solved efficiently on distributed-memory parallel computers, the meshes must be partitioned and distributed across processors in a way that balances the computational load and minimizes communication. The recursive spectral bisection method (RSB) has been shown to be very effective for such partitioning problems compared to alternative methods, but RSB in its simplest form is expensive. Here a multilevel version of RSB is introduced that attains about an order-of-magnitude improvement in run time on typical examples.     

Microglial FABP4-UCP2 Axis Modulates Neuroinflammation and Cognitive Decline in Obese Mice

The microglial fatty-acid-binding protein 4-uncoupling protein 2 (FABP4-UCP2) axis is a key regulator of neuroinflammation in high-fat-diet (HFD)-fed animals, indicating a role for FABP4 in brain immune response. We hypothesized that the FABP4-UCP2 axis is involved in regulating diet-induced cognitive decline. We tested cognitive function in mice lacking microglial FABP4 (AKO mice). Fifteen-week-old male AKO and wild-type (WT) mice were maintained on 60% HFD or normal chow (NC) for 12 weeks. Body composition was measured using EchoMRI. Locomotor activity, working memory, and spatial memory were assessed using behavioral tests (open field, T-maze, and Barnes maze, respectively). Hippocampal microgliosis was assessed via immunohistochemical staining. An inflammatory cytokine panel was assayed using hippocampal tissue. Real-time RT-PCR was performed to measure microglial UCP2 mRNA expression. Our data support that loss of FABP4 prevents cognitive decline in vivo. HFD-fed WT mice exhibited impaired long- and short-term memory, in contrast with HFD-fed AKO mice. HFD-fed WT mice had an increase in hippocampal inflammatory cytokine expression (IFNγ, IL-1β, IL-5, IL-6, KC/GRO(CXCL1), IL-10, and TNFα) and microgliosis, and decreased microglial UCP2 expression. HFD-fed AKO mice had decreased hippocampal inflammatory cytokine expression and microgliosis and increased microglial UCP2 expression compared to HFD-fed WT mice. Collectively, our work supports the idea that the FABP4-UCP2 axis represents a potential therapeutic target in preventing diet-induced cognitive decline.     

Differential Metabotypes in Synovial Fibroblasts and Synovial Fluid in Hip Osteoarthritis Patients Support Inflammatory Responses

Changes in cellular metabolism have been implicated in mediating the activated fibroblast phenotype in a number of chronic inflammatory disorders, including pulmonary fibrosis, renal disease and rheumatoid arthritis. The aim of this study was therefore to characterise the metabolic profile of synovial joint fluid and synovial fibroblasts under both basal and inflammatory conditions in a cohort of obese and normal-weight hip OA patients. Furthermore, we sought to ascertain whether modulation of a metabolic pathway in OA synovial fibroblasts could alter their inflammatory activity. Synovium and synovial fluid was obtained from hip OA patients, who were either of normal-weight or obese and were undergoing elective joint replacement surgery. The synovial fluid metabolome was determined by 1H NMR spectroscopy. The metabolic profile of isolated synovial fibroblasts in vitro was characterised by lactate secretion, oxygen consumption rate (OCR) and extracellular acidification rate (ECAR) using the Seahorse XF Analyser. The effects of a small molecule pharmacological inhibitor and siRNA targeted at glutaminase-1 (GLS1) were assessed to probe the role of glutamine metabolism in OA synovial fibroblast function. Obese OA patient synovial fluid (n = 5) exhibited a different metabotype, compared to normal-weight patient fluid (n = 6), with significantly increased levels of 1, 3-dimethylurate, N-Nitrosodimethylamine, succinate, tyrosine, pyruvate, glucose, glycine and lactate, and enrichment of the glutamine–glutamate metabolic pathway, which correlated with increasing adiposity. In vitro, isolated obese OA fibroblasts exhibited greater basal lactate secretion and aerobic glycolysis, and increased mitochondrial respiration when stimulated with pro-inflammatory cytokine TNFα, compared to fibroblasts from normal-weight patients. Inhibition of GLS1 attenuated the TNFα-induced expression and secretion of IL-6 in OA synovial fibroblasts. These findings suggest that altered cellular metabolism underpins the inflammatory phenotype of OA fibroblasts, and that targeted inhibition of glutamine–glutamate metabolism may provide a route to reducing the pathological effects of joint inflammation in OA patients who are obese.