Study of the effect of noble metal promotion in Ni-based catalyst for the Sabatier reaction

This paper reports the preparation and the evaluation of the performance of Ni-based powder catalysts with low nickel loading on the CO2 methanation reaction, that is an integral part of the power-to-gas (PtG) technology. CeO₂, CeZrO₄ and CeO₂/SiO₂ were selected as possible supports, and the results of this first screening pointed out that 10%Ni/CeO₂ catalyst could offer the best reaction performances because of ceria's peculiar characteristics. Moreover, the promotion of this promising formulation with the addition of a small amount of noble metals (Pt, Ru, Rh) was investigated, showing that platinum in particular can enhance the catalyst performances. A further study related to the noble metal loading pointed out that platinum and ruthenium have a different optimum loading condition: this result, together with the activity tests performed on monometallic formulations with only the noble metal, suggested that the two metals are able to catalyse two different reactions, thus promoting two different reaction mechanisms.     

Organochlorine pesticides in colostrums in case of normal and preterm labor (IASI, Romania)

Assessment of organochlorine pesticides (OCPs) in human body is important for human health because they have weak estrogenic or antiestrogenic effects and are considered endocrine disrupters. We used colostrum of women as indicator for levels of OCPs in human body for mothers with normal and preterm labor from eastern part of Romania. Sixty- three samples of colostrum were extracted by solid-phase extraction. Analyses were carried out using gas chromatography coupled to mass spectrometry (GC-MS). OCPs have been detected in all samples, with p,p’-dichlorodiphenyldichloroethylene (p,p’-DDE) and γ-hexachlorocyclohexane (γ-HCH) being at the highest concentrations. Of the organochlorines measured in clostrum samples from women in preterm labor, median levels of DDTs (470 ng/g) and HCHs (99 ng/g) were higher than for the same compounds from women in normal labor (median of DDTs = 268 ng/g and median of HCHs = 96 ng/g). Normal labor had higher median concentrations of HCB (19.5 ng/g) versus preterm labor (14 ng/g). Statistical data show high Spearman correlation coefficients between various OCPs. We found a good correlation between α-, γ-, β- and δ- HCH isomers (p < 0.001) for both normal and preterm labor. The most abundant target compound was p,p’-DDE (median value 96 ng/g, and 137 ng/g for mother with normal and preterm labor, respectively) in all colostrum samples. The estimated daily intakes of HCHs by infants exceeded corresponding Health Canada guidelines.     

Innovation at the end of the life cycle: discontinuous innovation strategies by incumbents

This paper focuses on the strategies of incumbents that seek to develop discontinuous innovations within the boundaries of a mature innovation system. Mature innovation systems do not provide support for these discontinuous innovations. This article focuses on exploring why incumbents in these setting engage in discontinuous innovation and what strategies they deploy to become successful. We analyse 10 cases of incumbents developing discontinuous innovations in the mature Dutch greenhouse horticulture sector. The results of our analysis show that the incumbents are primarily triggered by dissatisfaction with the current way of doing business and that the existing institutions are the main barrier to discontinuous innovation. In response, the incumbents try to circumvent the existing innovation system in their innovation process, but when successful also engage in changing the existing innovation system. This paper contributes to the understanding of the role of incumbents as source of discontinuous innovation in mature innovation systems.     

Corrosion behavior of Cu–SiO<Subscript>2</Subscript> nanocomposite coatings obtained by electrodeposition in the presence of cetyl trimethyl ammonium bromide

Copper silica composite coatings are an attractive alternative to chromium and nickel coatings in order to avoid environmental problems and for application in electrical devices. However, co-deposition of SiO₂ particles with metals occurs to a rather limited extent, generally under 1%, due to the hydrophilicity of SiO₂, which makes the incorporation of particles in a metallic matrix difficult. To overcome this drawback, the influence of cetyl trimethyl ammonium bromide (CTAB) on the deposition and corrosion behavior of Cu–SiO₂ coatings on steel has been studied. It was established that CTAB plays a beneficial role in SiO₂ suspension stabilization, promotes the co-deposition of nanoparticles in the copper matrix and improves the deposit morphology and structure. Consequently, a higher corrosion resistance of Cu–SiO₂ deposits obtained in the presence of CTAB was noticed. The most important effect was observed in the case when CTAB was used in concentration of 10⁻³ M in the electroplating bath.     

Development and validation of a high-performance liquid chromatography-mass spectrometry assay for determination of amphetamine, methamphetamine, and methylenedioxy derivatives in meconium

A procedure based on liquid chromatography-mass spectrometry (LC-MS) is described for determination of amphetamine, methamphetamine, and methylendioxy derivatives in meconium, using 3,4-methylendioxypropylamphetamine as internal standard. The analytes were initially extracted from the matrix by 17 mM methanolic HCl. Subsequently, a solid-phase extraction with Bondelut Certify columns was applied. Chromatography was performed on a C(18) reversed-phase column using a linear gradient of 10 mM ammonium bicarbonate, pH 9.0-methanol as a mobile phase. Analytes were determined in LC-MS single ion monitoring mode with an atmospheric pressure ionization-electrospray interface. The method was validated in the range 0.005-1.00 microg/g using 1 g of meconium per assay. Mean recoveries ranged between 61.1 and 87.2% for different analytes. The quantification limits were 0.005 microg/g meconium for amphetamine, methamphetamine, and 4-hydroxy-3-methoxymethamphetamine and 0.004 microg/g meconium for 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine, 3,4-methylenedioxyethylamphetamine, and N-methyl-1-(3,4-methylenedioxyphenyl)-2-butanamine. The method was applied to analysis of meconium in newborns to assess eventual fetal exposure to amphetamine derivatives.     

Simultaneous detection of transgenic DNA by surface plasmon resonance imaging with potential application to gene doping detection

Surface plasmon resonance imaging (SPRi) was used as the transduction principle for the development of optical-based sensing for transgenes detection in human cell lines. The objective was to develop a multianalyte, label-free, and real-time approach for DNA sequences that are identified as markers of transgenosis events. The strategy exploits SPRi sensing to detect the transgenic event by targeting selected marker sequences, which are present on shuttle vector backbone used to carry out the transfection of human embryonic kidney (HEK) cell lines. Here, we identified DNA sequences belonging to the Cytomegalovirus promoter and the Enhanced Green Fluorescent Protein gene. System development is discussed in terms of probe efficiency and influence of secondary structures on biorecognition reaction on sensor; moreover, optimization of PCR samples pretreatment was carried out to allow hybridization on biosensor, together with an approach to increase SPRi signals by in situ mass enhancement. Real-time PCR was also employed as reference technique for marker sequences detection on human HEK cells. We can foresee that the developed system may have potential applications in the field of antidoping research focused on the so-called gene doping.     

Binary‐offset‐carrier modulation techniques with applications in satellite navigation systems

An important aspect in designing the modulation scheme for various satellite systems, such as the modernized GPS and Galileo, is to obtain good spectral properties and suitable spectral shaping. For example, in the future satellite navigation systems, some of the main goals are: low interference with the existing GPS signals, good root‐mean‐square (RMS) bandwidth, good time resolution (in order to allow the separation between channel paths and to decrease the synchronization errors) etc. Starting from the recently proposed cosine‐ and sine‐BOC modulation families for GPS and Galileo systems, we introduce a new, generalized family, denoted here by double‐BOC (DBOC) modulation. We derive and analyze the properties of the power spectral densities (PSD) and autocorrelation functions (ACF) of the DBOC modulation with various orders, we show its relationship with BPSK, sine‐ and cosine‐BOC modulations, and we illustrate via several examples how to choose optimally the parameters of this new modulation family, according to different optimization criteria. The examples are targeting at applications such as the design of suitable modulations for Galileo open service (OS) and public regulated service (PRS) signals, but the authors believe that the DBOC concept might be useful to other satellite‐based applications, when the available bandwidth is large enough. Copyright © 2006 John Wiley & Sons, Ltd.     

Metal Triflates Incorporated in Mesoporous Catalysts for Green Synthesis of Fine Chemicals

Strong Lewis acid SnTf-MCM-41 and SnTf-UVM-7 catalysts with unimodal and bimodal pore systems were prepared in a two-step synthesis in which the triflic acid (Tf) was incorporated into previously synthesized mesoporous tin-containing silicas. The Sn incorporation inside the pore walls was carried out through the Atrane method. The SnTf-UVM-7 catalysts were prepared by aggregating nanometric mesoporous particles defining a hierarchic textural-type additional pore system. Catalysts with different Si/Sn ratios in the range 21.8–50.8 for SnTf-MCM-41 and 18.4 for SnTf-UVM-7 were found to be efficient catalysts for the acylation of aromatics and heteroaromatics. Under microwave irradiation the reaction was possible even with acetic acid. The selectivity to the desired product (o-hydroxyacetophenone for phenol) or the unfavored three-substituted five ring heterocycles was dramatically increased under these conditions. The process is green, environmentally safe, and heterogeneous.