Characterization of melanoidins from a glucose-glycine model system

The properties of melanoidins prepared from glucose and glycine (GG) were investigated by a three step purification protocol consisting of dialysis, gel filtration at high ionic strength and ion metal affinity chromatography. The high molecular weight fraction obtained in the GG system is responsible for 80% of the total brown colour and its antioxidative ability was about 1/4 of that of Trolox measured by the inhibition of linoleic acid oxidation. GG melanoidins have good affinity towards Cu (II) (32% bound to the resin) while it is much lower towards Pb (II) (10%) and Fe (II) (5%). Capillary zone electrophoresis analysis suggests that GG melanoidins are positively charged, although no signal was observed analysing melanoidins by matrix-assisted laser desorption-ionisation time-of-flight mass spectrometry (MALDI-TOF/MS).     

Carotenoids from tomatoes inhibit heterocyclic amine formation

Tomatoes are a rich source of antioxidants and they are commonly used for meat cooking in Mediterranean countries. The effects of tomato antioxidants on the formation of carcinogenic/mutagenic heterocyclic amines were investigated. A liquid model system containing as precursors creatinine, glucose and glycine in molar concentrations comparable to those present in bovine meat (chemical model system) was employed. A freeze-dried bovine meat juice (meat juice model system) was also used for some experiments. In both model systems, an inhibiting effect of tomato carotenoid fraction on the formation of imidazoquinolines (IQx, MeIQx and DiMeIQx) was observed. Using carotenoid extract at a concentration of 1000 ppm, inhibitions of 36% and 11% of IQx and MeIQx formation respectively in the chemical system and of 13% of MeIQx and of 5% of 4,8-DiMeIQx in the meat juice system was observed. The effect of the main tomato flavonoid, quercetin, was investigated using the meat juice system. Quercetin gave an inhibition of MeIQx formation between 9% and 57% with a maximum effect of 67% at 10 ppm.     

Using contexts and R-R interval estimation in lossless ECG compression

The paper presents a new lossless ECG compression scheme. The short-term predictor and the coder use conditioning on a small number of contexts. The long-term prediction is based on an algorithm for R-R interval estimation. Several QRS detection algorithms are investigated to select a low complexity and reliable detection algorithm. The coding of prediction residuals uses primarily the Golomb-Rice (GR) codes, but, to improve the coding results, escape codes GR-ESC are used in some contexts for a limited number of samples. Experimental results indicate the good overall performance of the lossless ECG compression algorithms (reducing the storage needs from 12 to about 3-4 bits per sample). The scheme consistently outperforms other waveform or general purpose coding algorithms.     

Development and validation of a high-performance liquid chromatography-mass spectrometry assay for determination of amphetamine, methamphetamine, and methylenedioxy derivatives in meconium

A procedure based on liquid chromatography-mass spectrometry (LC-MS) is described for determination of amphetamine, methamphetamine, and methylendioxy derivatives in meconium, using 3,4-methylendioxypropylamphetamine as internal standard. The analytes were initially extracted from the matrix by 17 mM methanolic HCl. Subsequently, a solid-phase extraction with Bondelut Certify columns was applied. Chromatography was performed on a C(18) reversed-phase column using a linear gradient of 10 mM ammonium bicarbonate, pH 9.0-methanol as a mobile phase. Analytes were determined in LC-MS single ion monitoring mode with an atmospheric pressure ionization-electrospray interface. The method was validated in the range 0.005-1.00 microg/g using 1 g of meconium per assay. Mean recoveries ranged between 61.1 and 87.2% for different analytes. The quantification limits were 0.005 microg/g meconium for amphetamine, methamphetamine, and 4-hydroxy-3-methoxymethamphetamine and 0.004 microg/g meconium for 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine, 3,4-methylenedioxyethylamphetamine, and N-methyl-1-(3,4-methylenedioxyphenyl)-2-butanamine. The method was applied to analysis of meconium in newborns to assess eventual fetal exposure to amphetamine derivatives.     

Rocket seedling production on the international space station: Growth and nutritional properties

Producing sprouts directly during space missions may represent an interesting opportunity to offer high-quality fresh ready to eat food to the astronauts. The goal of this work was to compare, in terms of growth and nutritional quality, rocket (Eruca sativa Mill.) seedlings grown in the International Space Station during the ENEIDE mission with those grown in a ground-based experiment (in presence and absence of clinorotation). The rocket seedlings obtained from the space-experiment were thinner and more elongated than those obtained in the ground-based experiment. Cotyledons were often closed in the seedlings grown in the space experiment. Quantitative (germination, fresh and dry weight) and qualitative (glucose, fructose, sucrose and starch) traits of rocket seedling were negatively affected by micrograv-ity, especially those recorded on seedlings grown under real microgravity conditions The total chlorophyll, and carotenoids of seedlings obtained in the space experiment were strongly reduced in comparison to those obtained in the ground-based experiment (presence and absence of clinorotation). The results showed that it is possible to produce rocket seedlings in the ISS; however, further studies are needed to define the optimal environmental conditions for producing rocket seedlings with high nutritional value     

The Conceptual Model of Well-Being Management Based on Achieving Requisite Personal Holism

Organizations should look at humans as multilayered, not only as professional entities. In synergy, not only individually, we define humans as: (1) physical, (2) mental, (3) social, (4) spiritual, and (5) economic entities, marked by requisitely holistic patterns of relatively permanent characteristics, due to which individuals differ from each other; they differ also as specialized professionals. All these and other attributes form synergies. On this basis, the behavior of individuals who are willing to practice interdisciplinary cooperation becomes socially responsible and they have a high level of well-being.

Individuals as well as organizations seek requisite personal holism (RPH) on the one hand and psychic well-being (PWB) on the other hand. Thus, individuals implement individual techniques and organizations implement special strategies, programs, and actions in the frame of human resource management (HRM). That is how organizations in the frame of HRM, more specifically in the frame of management well-being, are developing special programs for managing PWB. These programs are based on their RPH and organizations might help employees to feel respected and valued in their work settings, without regard to their culture, religion, ethnicity, gender, age, disability, or other individual differences. The most-often applied programs of the kind include: (1) stress management programs, (2) diversity management programs, (3) wellness programs, (4) employee assistance programs, and (5) programs for personal growth.     

Influence of oxygen on the sputtering of aluminum oxide for the surface passivation of crystalline silicon

While sputtering has been shown to be capable of depositing aluminum oxide suitable for surface passivation, the mechanisms for this are yet to be firmly established and its potential realized. In this paper, we investigate the relationships between the oxygen in the sputtering process to the resulting composition of the deposited film and the surface passivation obtained. We find that surface passivation is not strongly dependent on the bulk composition of the film. Instead the results indicate that the interfacial silicon oxide layer that forms after annealing between the aluminum oxide film and the silicon is a much more important factor; it is this combined structure of aluminum oxide, silicon oxide and silicon that is crucial for obtaining negative charges and excellent surface passivation.     

Influence of mediator immobilization on the electrochemically assisted microbial dechlorination of trichloroethene (TCE) and cis‐dichloroethene (cis‐DCE)

BACKGROUND: A bioelectrochemical process for trichloroethene (TCE) dechlorination was developed. In this new process, a solid‐state electrode polarized to ?450 mV versus the standard hydrogen electrode (SHE), in combination with a redox mediator (i.e., methyl viologen, MV) is employed as an electron donor for the microbial reductive dechlorination of TCE. In this study we compared the performance of the process with the redox mediator immobilized at the surface of electrodes or dissolved in the bulk liquid, using both a culture highly enriched in Desulfitobacterium spp., capable of dechlorinating TCE to cis‐dichloroethene (cis‐DCE), and a culture highly enriched in Dehalococcoides spp. capable of dechlorinating cis‐DCE to ethene. RESULTS: Short‐term potentiostatic (?450 mV versus SHE) experiments showed that TCE or cis‐DCE was dechlorinated both in the presence of soluble (500 µmol L^?1) and immobilized MV. However, TCE or cis‐DCE dechlorination rates with MV‐modified electrodes were remarkably lower than with soluble MV. Both cultures produced significant amounts of H₂ in the presence of electrically reduced, soluble MV, whereas no H₂ was produced when the mediator was immobilized at the electrode surface, regardless of the potential applied to the electrode, in the range ?425 to ?500 mV versus SHE. CONCLUSIONS: The process, operated with modified electrodes, supports the microbial dechlorination of TCE to ethene. Immobilization not only allows retention of the mediator within the system, but also increases process efficiency by preventing bioelectrochemical H₂ formation. On the other hand, strategies to increase dechlorination rates with modified electrodes need to be developed. Copyright © 2009 Society of Chemical Industry     

A posteriori optimization of parameters in stabilized methods for convection–diffusion problems – Part I

Stabilized finite element methods for convection-dominated problems require the choice of appropriate stabilization parameters. From numerical analysis, often only their asymptotic values are known. This paper presents a general framework for optimizing stabilization parameters with respect to the minimization of a target functional. Exemplarily, this framework is applied to the SUPG finite element method and the minimization of a residual-based error estimator, an error indicator, and a functional including the crosswind derivative of the computed solution. Benefits of the basic approach are demonstrated by means of numerical results.