Synthesis of layered MCM-22(P) in the presence of hexamethonium cations and its transformation into EUO- and MWW-type zeolites

Layered MCM-22(P) was synthesized in the presence of hexamethonium (HM) cations. Compared to zeolite EU-1 (EUO-type structure), which crystallizes in similar conditions, its formation is favored at high HM concentrations (HM/SiO₂ ≥ 0.3) and in the absence of Na₂O. HM-containing MCM-22(P) was used as starting material for zeolite formation. Upon hydrothermal treatment, HM-MCM-22(P) transforms into zeolite EU-1 and upon calcination into a MWW-type zeolite. Transformation mechanisms were studied by standard characterization techniques such as XRD, SEM and TEM. Catalytic properties of the MWW-type zeolite obtained from this precursor were evaluated in a m-xylene isomerization reaction. Compared to zeolite MCM-22 prepared with hexamethyleneimine, a higher catalytic activity and an increased isomerization selectivity were observed and discussed.     

Synthesis,characterization, and degradation of block polyesteramides containing poly(L-lactide) segments

Random multiblock polyesteramides (PEAs) having polyester (PE) content of 20–50 wt % have been prepared by low-temperature polycondensation using sebacoyl chloride, 1,6-diaminohexane, and telechelic oligomers of L-lactide with M_n = 600–1500. The PEAs were characterized by IR and ¹H-NMR spectroscopy, wide-angle X-ray diffraction, and thermal analysis. Only the polyamide segments are able to crystallize, and the crystallinity depends on the composition and architecture of the PEAs. From viscosity and IR measurements it was established that the chain degradation of PEA powders or films suspended in buffer solutions occurs by hydrolysis of the ester linkages. The degradation rate is influenced by pH, PE content, and, to a lesser extent, by crystallinity. © 1992 John Wiley & Sons, Inc.     

Photoconductivity and photoluminescence under bias in GaInNAs/GaAs MQW p-i-n structures

The low temperature photoluminescence under bias (PLb) and the photoconductivity (PC) of a p-i-n GaInNAs/GaAs multiple quantum well sample have been investigated. Under optical excitation with photons of energy greater than the GaAs bandgap, PC and PLb results show a number of step-like increases when the sample is reverse biased. The nature of these steps, which depends upon the temperature, exciting wavelength and intensity and the number of quantum wells (QWs) in the device, is explained in terms of thermionic emission and negative charge accumulation due to the low confinement of holes in GaInNAs QWs. At high temperature, thermal escape from the wells becomes much more dominant and the steps smear out.     

Design and characterization of PNVCL-based nanofibers and evaluation of their potential applications as scaffolds for surface drug delivery of hydrophobic drugs

In this work, nanofiber scaffolds for surface drug delivery applications were obtained by electrospinning poly(N-vinylcaprolactam) (PNVCL) and its blends with poly(ε-caprolactone) and poly(N-vinylcaprolactam)-b-poly(ε-caprolactone). The process parameters to obtain smooth and beadless PNVCL fibers were optimized. The average fibers diameter was less than 1 μm, and it was determined by scanning electron microscopy analyses. Their affinity toward water was evaluated by measuring the contact angle with water. The ketoprofen release behavior from the fibers was analyzed using independent and model-dependent approaches. The low values of the release exponent (n < 0.5) obtained for 20 and 42 °C, indicating a Fickian diffusion mechanism for all formulations. Dissolution efficiencies (DEs) revealed the effect of polymer composition, methodology used in the electrospinning process, and temperature on the release rate of ketoprofen. PNVCL/poly(N-vinylcaprolactam)-b-poly(ε-caprolactone)-based nanofibers showed greater ability to control the in vitro release of ketoprofen, in view of reduced kinetic constant and DE, making this material promising system for controlling release of hydrophobic drugs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48472.     

Copper(I/II), α/β‐Synuclein and Amyloid‐β: Menage à Trois?

Copper binding to α‐synuclein (aS) and to amyloid‐β (Ab) has been connected to Parkinson's and Alzheimer's disease (AD), respectively, because Cu ions can modulate the peptide aggregation, and these Cu ? peptide complexes can catalyse the production of reactive oxygen species (ROS). In a significant proportion of AD brains, aggregation of aS and Ab has been detected, and it was proposed that Ab and aS interact with each other. Thus, we investigated the potential interactions of Ab and aS through their binding of copper(I) and copper(II). Additionally, β‐synuclein (bS) was investigated, due to its additional methionine residue, a potential Cu^I ligand. We found that: 1) the peptides containing the Cu‐binding domains Ab1–16, aS1–15 and bS1–15 have similar affinities towards Cu^II and towards Cu^I, with Ab1–16 being slightly stronger, 2) in the case of Cu^I, the additional Met residue in bS1–15 increased the affinity slightly, 3) the exchange of Cu^I/II between the two peptides is rapid (≤ms), 4) a/bS1–15 and Ab1–16 form a heterodimeric complex with Cu^II, 5) Cu^I probably promotes a transient ternary complex, 6) the different Cu^I/II coordination of Ab1–16, aS1–15 and bS1–15 impacts the capacity to produce ROS and to oxidise catechol, and 7) when Ab1–16, aS1–15 and Cu are present, the ROS production more closely resembles that by Ab1–16. The work gives insights into the coordination chemistry of these related peptides, and the relevance of coordination differences, the ternary complex and ROS production are discussed.     

Small and large scale segmental motion in polymers: estimating cooperativity length by ordinary relaxation experiments

We derive a suitable expression for estimating the size of the cooperatively rearranging regions (CRRs) in supercooled polymer melts by fitting data worked out by ordinary relaxation experiments carried out in isothermal conditions. As an example, the average CRR size in poly(n‐butyl methacrylate) in proximity to the glass transition temperature is derived from a stress relaxation experiment performed by means of an atomic force microscopy setup. Good agreement is found with results in the literature derived from measurements of temperature fluctuations (the so‐called Donth method). The temperature dependence of the CRR size is explored for poly(butadiene); in this case the segmental relaxation function is derived through a novel method for the analysis of the efficiency with which free induction decay echoes are refocused in ¹H NMR experiments. It is found that the CRR size increases upon cooling. The results derived from the analysis of the NMR data are found to be in satisfactory agreement with those worked out from broadband dielectric spectroscopy data in the literature. © 2015 Society of Chemical Industry     

Prototype and Chimera-Type Galectins in Placentas with Spontaneous and Recurrent Miscarriages

Galectins are galactose binding proteins and, in addition, factors for a wide range of pathologies in pregnancy. We have analyzed the expression of prototype (gal-1, -2, -7, -10) and chimera-type (gal-3) galectins in the placenta in cases of spontaneous abortions (SPA) and recurrent abortions (RA) in the first trimester. Fifteen placental samples from healthy pregnancies were used as a control group. Nine placentas were examined for spontaneous abortions, and 12 placentas for recurrent abortions. For differentiation and evaluation of different cell types of galectin-expression in the decidua, immunofluorescence was used. For all investigated prototype galectins (gal-1, -2, -7, -10) in SPA and RA placenta trophoblast cells the expression is significantly decreased. In the decidua/extravillous trophoblast only gal-2 expression was significantly lowered, which could be connected to its role in angiogenesis. In trophoblasts in first-trimester placentas and in cases of SPA and RA, prototype galectins are altered in the same way. We suspect prototype galectins have a similar function in placental tissue because of their common biochemical structure. Expression of galectin 3 as a chimera type galectin was not found to be significantly altered in abortive placentas.     

Designing Dual Transglutaminase 2/Histone Deacetylase Inhibitors Effective at Halting Neuronal Death

In recent years there has been a clear consensus that neurodegenerative conditions can be better treated through concurrent modulation of different targets. Herein we report that combined inhibition of transglutaminase 2 (TG2) and histone deacetylases (HDACs) synergistically protects against toxic stimuli mediated by glutamate. Based on these findings, we designed and synthesized a series of novel dual TG2–HDAC binding agents. Compound 3 [(E)‐N‐hydroxy‐5‐(3‐(4‐(3‐oxo‐3‐(pyridin‐3‐yl)prop‐1‐en‐1‐yl)phenyl)thioureido)pentanamide] emerged as the most interesting of the series, being able to inhibit TG2 and HDACs both in vitro (TG2 IC₅₀=13.3±1.5 μm , HDAC1 IC₅₀=3.38±0.14 μm , HDAC6 IC₅₀=4.10±0.13 μm ) and in cell‐based assays. Furthermore, compound 3 does not exert any toxic effects in cortical neurons up to 50 μm and protects neurons against toxic insults induced by glutamate (5 mm ) with an EC₅₀ value of 3.7±0.5 μm .     

Porosity measurements in suspension plasma sprayed YSZ coatings using NMR cryoporometry and X-ray microscopy

A large variety of coatings are used to protect structural engineering materials from corrosion, wear, and erosion, and to provide thermal insulation. In this work, yttria-stabilized zirconia coatings produced by suspension plasma spraying were investigated with respect to their microstructure and especially their porosity, as the porosity affects the thermal insulation of the underlying component. To determine porosity, pore size distribution, and pore shape, the coatings were investigated using novel advanced characterization techniques like NMR cryoporometry and X-ray microscopy. In general, the porosity is inhomogeneously distributed and the coatings showed a large variety of pore sizes ranging from a few nanometers to micrometers.     

Tough salami-inspired Cf/ZrB2 UHTCMCs produced by electrophoretic deposition

One of the biggest challenges of the materials science is the mutual exclusion of strength and toughness. This issue was minimized by mimicking the natural structural materials. To date, few efforts were done regarding materials that should be used in harsh environments. In this work we present novel continuous carbon fiber reinforced ultra-high-temperature ceramic matrix composites (UHTCMCs) for aerospace featuring optimized fiber/matrix interfaces and fibers distribution. The microstructures – produced by electrophoretic deposition of ZrB₂ on unidirectional carbon fibers followed by ZrB₂ infiltration and hot pressing – show a maximum flexural strength and fracture toughness of 330 MPa and 14 MPa m^1/2, respectively. Fracture surfaces are investigated to understand the mechanisms that affect strength and toughness. The EPD technique allows the achievement of a peculiar salami-inspired architecture alternating strong and weak interfaces.