Design and characterization of PNVCL-based nanofibers and evaluation of their potential applications as scaffolds for surface drug delivery of hydrophobic drugs

In this work, nanofiber scaffolds for surface drug delivery applications were obtained by electrospinning poly(N-vinylcaprolactam) (PNVCL) and its blends with poly(ε-caprolactone) and poly(N-vinylcaprolactam)-b-poly(ε-caprolactone). The process parameters to obtain smooth and beadless PNVCL fibers were optimized. The average fibers diameter was less than 1 μm, and it was determined by scanning electron microscopy analyses. Their affinity toward water was evaluated by measuring the contact angle with water. The ketoprofen release behavior from the fibers was analyzed using independent and model-dependent approaches. The low values of the release exponent (n < 0.5) obtained for 20 and 42 °C, indicating a Fickian diffusion mechanism for all formulations. Dissolution efficiencies (DEs) revealed the effect of polymer composition, methodology used in the electrospinning process, and temperature on the release rate of ketoprofen. PNVCL/poly(N-vinylcaprolactam)-b-poly(ε-caprolactone)-based nanofibers showed greater ability to control the in vitro release of ketoprofen, in view of reduced kinetic constant and DE, making this material promising system for controlling release of hydrophobic drugs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48472.     

Synthesis,characterization, and degradation of block polyesteramides containing poly(L-lactide) segments

Random multiblock polyesteramides (PEAs) having polyester (PE) content of 20–50 wt % have been prepared by low-temperature polycondensation using sebacoyl chloride, 1,6-diaminohexane, and telechelic oligomers of L-lactide with M_n = 600–1500. The PEAs were characterized by IR and ¹H-NMR spectroscopy, wide-angle X-ray diffraction, and thermal analysis. Only the polyamide segments are able to crystallize, and the crystallinity depends on the composition and architecture of the PEAs. From viscosity and IR measurements it was established that the chain degradation of PEA powders or films suspended in buffer solutions occurs by hydrolysis of the ester linkages. The degradation rate is influenced by pH, PE content, and, to a lesser extent, by crystallinity. © 1992 John Wiley & Sons, Inc.     

Prototype and Chimera-Type Galectins in Placentas with Spontaneous and Recurrent Miscarriages

Galectins are galactose binding proteins and, in addition, factors for a wide range of pathologies in pregnancy. We have analyzed the expression of prototype (gal-1, -2, -7, -10) and chimera-type (gal-3) galectins in the placenta in cases of spontaneous abortions (SPA) and recurrent abortions (RA) in the first trimester. Fifteen placental samples from healthy pregnancies were used as a control group. Nine placentas were examined for spontaneous abortions, and 12 placentas for recurrent abortions. For differentiation and evaluation of different cell types of galectin-expression in the decidua, immunofluorescence was used. For all investigated prototype galectins (gal-1, -2, -7, -10) in SPA and RA placenta trophoblast cells the expression is significantly decreased. In the decidua/extravillous trophoblast only gal-2 expression was significantly lowered, which could be connected to its role in angiogenesis. In trophoblasts in first-trimester placentas and in cases of SPA and RA, prototype galectins are altered in the same way. We suspect prototype galectins have a similar function in placental tissue because of their common biochemical structure. Expression of galectin 3 as a chimera type galectin was not found to be significantly altered in abortive placentas.     

Copper(I/II), α/β‐Synuclein and Amyloid‐β: Menage à Trois?

Copper binding to α‐synuclein (aS) and to amyloid‐β (Ab) has been connected to Parkinson's and Alzheimer's disease (AD), respectively, because Cu ions can modulate the peptide aggregation, and these Cu ? peptide complexes can catalyse the production of reactive oxygen species (ROS). In a significant proportion of AD brains, aggregation of aS and Ab has been detected, and it was proposed that Ab and aS interact with each other. Thus, we investigated the potential interactions of Ab and aS through their binding of copper(I) and copper(II). Additionally, β‐synuclein (bS) was investigated, due to its additional methionine residue, a potential Cu^I ligand. We found that: 1) the peptides containing the Cu‐binding domains Ab1–16, aS1–15 and bS1–15 have similar affinities towards Cu^II and towards Cu^I, with Ab1–16 being slightly stronger, 2) in the case of Cu^I, the additional Met residue in bS1–15 increased the affinity slightly, 3) the exchange of Cu^I/II between the two peptides is rapid (≤ms), 4) a/bS1–15 and Ab1–16 form a heterodimeric complex with Cu^II, 5) Cu^I probably promotes a transient ternary complex, 6) the different Cu^I/II coordination of Ab1–16, aS1–15 and bS1–15 impacts the capacity to produce ROS and to oxidise catechol, and 7) when Ab1–16, aS1–15 and Cu are present, the ROS production more closely resembles that by Ab1–16. The work gives insights into the coordination chemistry of these related peptides, and the relevance of coordination differences, the ternary complex and ROS production are discussed.     

Small and large scale segmental motion in polymers: estimating cooperativity length by ordinary relaxation experiments

We derive a suitable expression for estimating the size of the cooperatively rearranging regions (CRRs) in supercooled polymer melts by fitting data worked out by ordinary relaxation experiments carried out in isothermal conditions. As an example, the average CRR size in poly(n‐butyl methacrylate) in proximity to the glass transition temperature is derived from a stress relaxation experiment performed by means of an atomic force microscopy setup. Good agreement is found with results in the literature derived from measurements of temperature fluctuations (the so‐called Donth method). The temperature dependence of the CRR size is explored for poly(butadiene); in this case the segmental relaxation function is derived through a novel method for the analysis of the efficiency with which free induction decay echoes are refocused in ¹H NMR experiments. It is found that the CRR size increases upon cooling. The results derived from the analysis of the NMR data are found to be in satisfactory agreement with those worked out from broadband dielectric spectroscopy data in the literature. © 2015 Society of Chemical Industry     

THE USE OF A GAS CHROMATOGRAPH TO OBTAIN DRYING RATES DATA THROUGH SIMPLE LABORATORY EXPERIMENTS

Abstract

A method making use of a gas chromatograph was investigated to acquire bound solvent drying rates. The solid to be dried was used as stationary phase in a chromatographic column, and the TCD detector was used to follow the decrease of solvent content of the effluent as inert gas was flown through the column. The measurement of the break-through curve allows the evolution of drying rate with time or solvent content to be obtained. The comparison of the experimental results with numerical simulation leads to the determination, through parametric adjustment, of the internal mass-transfer coefficient as a function of the solvent content during the second stage of bound solvent drying period. This parameter can lead to the value of the diffusivity as a function of solvent content.     

Preparation and characterization of poly(vinyl chloride)/polystyrene/poly(ethylene glycol) hollow‐fiber ultrafiltration membranes

Hollow‐fiber ultrafiltration (UF) membranes were prepared from blends of poly(vinyl chloride) (PVC) and polystyrene (PS) with a dry/wet phase inversion method. Poly(ethylene glycol) (PEG) and N,N‐dimethylacetamide were used as the additive and solvent, respectively. The effects of the PEG concentration in the dope solution as an additive on the cross sections and inner and outer surface morphologies, permeability, and separation performance of the hollow fibers were examined. The mean pore size, pore size distribution, and mean roughness of both the inner and outer surfaces of the produced hollow fibers were determined by atomic force microscopy. Also, the mechanical properties of the hollow‐fiber membranes were investigated. UF experiments were conducted with aqueous solutions of poly(vinyl pyrrolidone) (PVP; K‐90, M_w = 360 kDa). From the results, we found that the PVC/PS hollow‐fiber membranes had two layers with a fingerlike structure. These two layers were changed from a wide and long to a thin and short morphology with increasing PEG concentration. A novel and until now undescribed shape of the nodules in the outer surfaces, which was denoted as a sea‐waves shape, was observed. The outer and inner pore sizes both increased with increasing PEG concentration. The water permeation flux of the hollow fibers increased from 104 to 367 L m^?2 h^?1 bar^?1) at higher PEG concentrations. The PVP rejection reached the highest value at a PEG concentration of 4 wt %, whereas at higher values (from 4 to 9 wt %), the rejection decreased. The same trend was found also for the tensile stress at break, Young's modulus, and elongation at break of the hollow fibers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 989‐1004, 2013