A Petri net based approach to modeling and scheduling for an FMSand a case study

In this paper, a timed-place Petri net (TPPN) model for flexible manufacturing systems (FMSs) is constructed, which contains two major submodels: the stationary transportation model; and the variable process flow model. For multiple automated guided vehicle (AGV) systems, the authors embed a simple rule and introduce a push-AGV strategy in a TPPN model to solve the collision and traffic jam problems of such vehicles. Since a firing sequence of the TPPN from the initial marking to the final marking can be seen as a schedule of the modeled FMS, by using an A^* based search algorithm, namely, the limited-expansion A algorithm, an effective schedule of the part processing can be obtained. To show the promising potential of the proposed work, a prototype FMS is used as a target system for implementation. The experiment results assert that the job-shop scheduling problem can always be satisfactorily solved     

Suppression of boron penetration in p+ polysilicon gateP-MOSFETs using low-temperature gate-oxide N2O anneal

It has been reported that high-temperature (~1100°C) N₂ O-annealed oxide can block boron penetration from poly-Si gates to the silicon substrate. However, this high-temperature step may be inappropriate for the low thermal budgets required of deep-submicron ULSI MOSFETs. Low-temperature (900~950°C) N₂O-annealed gate oxide is also a good barrier to boron penetration. For the first time, the change in channel doping profile due to compensation of arsenic and boron ionized impurities was resolved using MOS C-V measurement techniques. It was found that the higher the nitrogen concentration incorporated at Si/SiO₂ interface, the more effective is the suppression of boron penetration. The experimental results also suggest that, for 60~110 Å gate oxides, a certain amount of nitrogen (~2.2%) incorporated near the Si/SiO₂ interface is essential to effectively prevent boron diffusing into the underlying silicon substrate     

Mechanism analysis of gate-induced drain leakage in off-state n-MOSFET

An analytical expression for both band-to-band and band-trap-band indirect tunnelings is used to study the gate-induced drain leakage (GIDL) current of MOSFETs measured before and after hot-carrier stress. The voltage and temperature dependence of GIDL are characterized. Both results show that interface traps situated near the midgap participate in the conduction of GIDL, and band-trap-band indirect tunneling could be the major mechanism. This is further supported by the fact that the percentage increase in GIDL induced by hot-carrier stress is about the same as the corresponding increase in interface-trap density. On the other hand, under low-field conditions, trap-assisted Poole–Frenkle emission dominates over tunneling for temperatures even well below room temperature.     

The effects of growth factors on Tenon''s capsule fibroblasts in serum-free culture

Recent studies from our laboratory have shown that in the mouse and rat nephron Ca2+ and Mg2+ are not reabsorbed in the medullary part of the thick ascending limb (mTAL) of Henle's loop. The aim of the present study was to investigate whether the absence of transepithelial Ca2+ and Mg2+ transport in the mouse mTAL is due to its relative low permeability to divalent cations. For this purpose, transepithelial ion net fluxes were measured by electron probe analysis in isolated perfused mouse mTAL segments, when the transepithelial potential difference (PDte.) was varied by chemical voltage clamp, during active NaCl transport inhibition by luminal furosemide. The results show that transepithelial Ca2+ and Mg2+ net fluxes in the mTAL are not driven by the transepithelial PDte. At zero voltage, a small but significant net secretion of Ca2+ into the tubular lumen was observed. With a high lumen-positive PDte generated by creating a transepithelial bath-to-lumen NaCl concentration gradient, no Ca2+ and Mg2+ reabsorption was noted; instead significant and sustained Ca2+ and Mg2+ net secretion occurred. When a lumen-positive PDte was generated in the absence of apical furosemide, but in the presence of a transepithelial bath-to-lumen NaCl concentration gradient, a huge Ca2+ net secretion and a lesser Mg2+ net secretion, not modified by ADH, were observed. Replacement of Na+ by K+ in the lumen perfusate induced, in the absence of PDte changes, important but reversible net secretions of Ca2+ and Mg2+. In conclusion, our results indicate that the passive permeability of the mouse mTAL to divalent cations is very low and not influenced by ADH. This nephron segment can secrete Ca2+ and Mg2+ into the luminal fluid under conditions which elicit large lumen-positive transepithelial potential differences. Given the impermeability of this epithelium to Ca2+ and Mg2+, the secretory processes would appear to be of cellular origin.     

Fuzzy consecutive-k-out-of-n:F system reliability

In this paper, we propose a new method to analyze fuzzy consecutive-k-out-of-n:F system reliability using fuzzy GERT. The triangular fuzzy numbers are used to fuzzify probabilities of the consecutive-k-out-of-n:F system and the interval arithmetic, α-cuts and an index of optimism λ are applied to compute fuzzy consecutive-k-out-of-n:F system reliability on fuzzy the GERT network. Futhermore, we can obtain all computation results by “MATHEMATICA” package.     

Essential SMSs: developing a service management scheme for semiconductor factory management systems

A semiconductor factory contains hundreds of pieces of equipment. More reliable service by equipment managers is required to increase the utilization of equipment and improve product quality and yield. Therefore, developing a reliable service management scheme (SMS) for semiconductor factory management systems is essential. This study presents an SMS that applies Jini Technology and uses the design by contract technologies. The SMS has error-detecting and function-replacing capabilities. The SMS detects the malfunctioning of an equipment manager (service) and sends an event notice to the factory manager. The GEV in the SMS archives the credit values of all of the equipment managers so that the factory manager can select better equipment managers for service by checking their credit values. The illustrative example and the evaluation of the reliability improvement reveal that the proposed SMS provides an efficient, reliable, fault tolerant, and cost-effective mechanism for semiconductor factory management systems. Lastly, this illustrative example is successfully implemented and demonstrated and the core technology of SMS is transferred to and commercialized by Charming Systems Corporation.     

3.5代通信中链路自适应技术的研究和仿真

3.5代移动通信中的链路自适应技术使用自适应调制编码和快速混合重传技术替代了3代中使用的功率控制技术。仿真结果比较了这两种新技术与功率控制技术的性能,证明了这两个新技术显著地提高了网络平均的吞吐量。