Impulsive Noise Suppression from Highly Distorted Images with Triangular Interpolants

In this paper a new filter, Triangular Interpolant Based Impulsive Noise Suppression Filter (SF), is proposed to restore images corrupted by fixed valued impulsive noise (IN). The proposed filter comprises two main stages: detection of noise and restoration of corrupted pixels. The SF achieves the restoration of the detected noisy pixels by using one of the Triangular Interpolant techniques and leaves the other pixels unaltered. Simulation results reveal that the proposed filter shows better performance than the highly approved IN suppression filters across a wide noise density ranging from 10% to 90%. The proposed filter also perfectly achieves the robustness anddetail preservation with reduced computational complexity.     

Sucralfate attenuates gastric mucosal lesions and increased vascular permeability induced by ischaemia and reperfusion in rats

Recent evidence suggests that oxygen-derived free radicals are involved in mediating gastric microvascular and parenchymal cell injuries induced by ischaemia and reperfusion. Therefore, the effect of the locally acting anti-ulcer drug, sucralfate, was studied on ischaemia and reperfusion (e.g. induced gastric lesions, intraluminal bleeding, changes in vascular permeability and non-protein sulfhydryl levels in the rat stomach). Allopurinol was used as a known standard antioxidant drug. Rats were subjected to 30 min of gastric ischaemia in the presence of 100 mmol/L hydrochloric acid and reperfusion periods of 15, 30 or 60 min duration. The gastric lesions were assessed microscopically under an inverted microscope. The vascular permeability was quantified by measuring the extravasated Evans blue in the stomach. There were significantly greater numbers of gastric lesions, intraluminal bleeding and leakage of Evans blue during all reperfusion periods as compared with those of ischaemia, with maximum effects occurring at 60 min following reperfusion. Pretreatment with sucralfate (31.25-250 mg/kg, p.o.) or allopurinol (12.5-50 mg/kg, i.p.) 30 min before the procedure, dose-dependently reduced the gastric lesions, intraluminal bleeding, and decreased the vascular permeability induced by ischaemia and reperfusion. Furthermore, sucralfate dose-dependently reverses the ischaemia and reperfusion-induced depletion of mucosal non-protein sulfhydryl levels and inhibited the superoxide radical production in both cell-free xanthine-xanthine oxidase and in the stimulated polymorphonuclear cellular systems. These results suggest that the protection produced by sucralfate against gastric injury may be due to its antioxidant effects.     

On a large-gain theorem

The aim of this paper is to give a general quantitative requirement which the loop gain must satisfy in order to stabilize a given unstable (possibly nonlinear and time-varying) plant, namely that the gain must exceed one.     

Effect of flexure induced transverse crack and self-healing on chloride diffusivity of reinforced mortar

Cracks in reinforced concrete are unavoidable. Durability is of increasing concern in the concrete industry, and it is significantly affected by the presence of cracks. The corrosion of reinforcing steel due to chloride ions in deicing salts or sea-water is a major cause of premature deterioration of reinforced concrete structures. Although, it is generally recognized that cracks accelerate the ingress of chlorides in concrete, a lack of consensus on this subject does not yet allow reliable quantification of their effects. The present work studies the relationship between crack widths and chloride diffusivity. Flexural load was introduced to generate cracks of width ranging between 29 and 390 μm. As crack width was increased, the effective diffusion coefficient was also increased, thus reducing the initiation period of corrosion process. For cracks with widths less than 135 μm, the effect of crack widths on the effective diffusion coefficient of mortar was found to be marginal, whereas for crack widths higher than 135 μm the effective diffusion coefficient increased rapidly. Therefore, the effect of crack width on chloride penetration was more pronounced when the crack width is higher than 135 μm. Results also indicate that the relation between the effective diffusion coefficient and crack width was found to be power function. In addition, a significant amount of self-healing was observed within the cracks with width below 50 μm subjected to NaCl solution exposure. The present research may provide insight into developing design criteria for a durable concrete and in predicting service life of a concrete structures.     

Conceptual damage-sensitive features for structural health monitoring: Laboratory and field demonstrations

The use of damage-sensitive features to evaluate structural condition or health is a very critical aspect of structural health monitoring. The purpose of this paper is to investigate the potential of two different damage-sensitive features for detecting damage. Different damage scenarios are simulated on a large-scale laboratory structure and a three-span highway bridge for demonstration. The features presented in this paper are the modal flexibility-based deflection and curvature both of which are obtained directly from dynamic properties. In the literature, flexibility associated with mode shapes and mode shapes curvatures have been mostly explored. In this study, multi-input–multi-output dynamic data are used to obtain modal flexibility, which is a close approximation to the actual flexibility. A main novelty is that the curvature is calculated from the deflected shapes using the modal flexibility as opposed to using modal vectors. In this paper, the theory of the methodology is explained and then experimental studies and results are presented. For the experimental studies, the laboratory specimen and the three-span bridge were gradually damaged. It is shown that both deflection and curvature are conceptual and physically meaningful features for damage detection and localization. The issues and the requirements for these features to perform successfully are also presented.     

Ice-slurry production using direct contact heat transfer

An ice slurry generation system was developed using direct contact heat transfer between water and the coolant, Fluroinert FC-84. The location of the coolant nozzle is an important design consideration to avoid clogging due to freezing of water. An ice fraction of up to about 40 percent was obtained with the nozzle located at the bottom of the ice slurry tank and the jet directed upwards into the water. Two simplified model were developed to extract the heat transfer coefficient between the coolant drops and the water. The first model requires as input the average drop diameter and the residence time while the second model uses the measured drop diameter distribution. The estimated heat transfer coefficients are much smaller than those computed using single-sphere correlations.     

A generalized equation for the prediction of melting temperatures of homopolymers and copolymers

A generalized equation was derived to calculate the melting temperatures of homopolymers and copolymers. The Gibbs‐Thomson equation for homopolymers and a modified application to copolymers were derived using the proposed equation. The melting temperature T_m⁰ in the Flory equation corresponds to the melting temperature T_m^C,∞ of copolymer crystals with stems of infinite length. Also, T_m^C,n*, the melting temperature for copolymer crystals with stems containing the maximum possible number of structural units, n*, should be used instead of T_m⁰ as the basis of supercooling in crystallization. The proposed equation shows good agreement with experimental data for α‐alkene‐ethylene homogeneous copolymers.     

On the kinetics of the autoxidation of fats: influence of pro‐oxidants,antioxidants and synergists

The influence of minor amounts of pro‐ and anti‐oxidants on the kinetics of the autoxidation of fat has been evaluated. The reaction rates of oxygen with the substrates were found to follow the same basic equation, hitherto established for pure substrates. There is evidence that the surface of the reaction vessel also acts as a reaction catalyst and its effect is proportional to the area of glass in contact with lipids. Oxidation is enhanced by trace metal ions as well as by surface‐active compounds (e.g. hydroperoxides and sterols). Antioxidants such as α‐tocopherol and butylated hydroxyanisole inhibit the oxidation by delaying the start of oxygen consumption (the induction period) while retarders like amino acids only decrease the rate of oxidation. Thus pro‐ and anti‐ oxidants affect either the start or the rate of oxygen consumption. The empirical formula dx/dt = k [O₂] (1‐x/n) f′(t) was found applicable to the different stages of oxidation.