The gray level aura matrices for textured image segmentation

Inspired by an intuitive analogy that exists between the gray level textures and the miscibility in the multiphase fluids, the aura concept was developed from set theory tools in order to modeling the texture image. The gray level aura matrix (GLAM) has been then proposed to generalize the gray level cooccurrence matrix (GLCM) which remains very popular in the texture analysis. The GLAM indicates how much each gray level is present in the neighborhood of each other gray level. The neighborhood is defined by a structuring element as one used in mathematical morphology. The GLAM is mainly used and studied in synthesis and classification of textures framework but very few works are devoted to the segmentation. The aim of this paper is to exploit the GLAM for the segmentation of textured images. Experiments results over synthetic and real images show the efficiency of the GLAM. The influence of the shape and the size of the structuring element on the segmentation results are also studied.     

Deposition thickness based high-throughput nano-imprint template

International Technology Roadmap for Semiconductors 2003 projected nano-imprint lithography has the potential of high throughput, sub-20 nm resolution, and low cost [S.Y. Chou, P.R. Krauss, P.J. Renstrom, Appl. Phys. Lett. 67 (1995) 3144; Science 272 (1996) 85, J.A. Rogers, C. Mirkin, Mater. Res. Bull. 26 (2001)]. For nano-imprint lithography, a template with 1X resolution is required. The existing industrial infrastructure for supporting deep ultra violet 4X photo masks by e-beam and/or a laser beam scanning writer does not offer pitch (center-to-center distance of an array of patterned lines) less than ∼60 nm [<http://public.itrs.net/2003ITRS>]. For nano-imprint lithography to be accepted across the industry, a reproducible simple fabrication process to make a high resolution, single emboss template is essential [L. Jay Guo, J. Phys. D: Appl. Phys. 37 (2004) R123-R141]. Here we show, a general fabrication method and fabricated nano-imprint templates with sub-15 nm template line width and 10 nm pitch length through out the entire 200 mm wafer, varying the deposition thickness of multiple alternate films, using atomic layer deposition. Although multilayer nano-imprint templates and their exciting use have been demonstrated, [W.J. Dauksher et al., J. Vac. Sci. Technol. B 22 (2004) 3306, B. Heidari, et al., The 49th international conference on electron, ion and photon beam technology and nanofabrication, Orlando, Florida, 2005, William M. Tong, et al., Proc. SPIE 5751 (2005) 46-55, N.A. Melosh, A. Boukai, F. Diana, B. Gerardot, A. Badolato, P.M. Petroff, J.R. Heath, Science 300 (2003) 112] such a small pitch was not shown and either complex lattice mismatch-based epitaxially grown films or unconventional etch chemistry was used. The bare necessity was a simple and economical fabrication process for a high throughput nano-imprint template. In that context, we have developed a template fabrication process using classical micro-fabrication techniques. Successful use of these techniques made the template fabrication process simple, economical, and expedient. Also a novel technique to provide flexible and accurate alignment for nanowire patterning has been described. In this technique, nanowire patterning is accomplished on the entire wafer with a single impression. Industry level batch-fabrication of our scheme illustrates its reproducibility and manufacturability. We anticipate, this simple, economical and time saving technique will help researchers and developers to perform their experiment on nano-scale feature patterned substrates easily and conveniently.     

ANALYSIS OF INTERNALLY GENERATED NOISE OF BIOELECTRIC AMPLIFIERS

This papenr deals with internally generated noise of bioelectric amplifiers that are usually used for processing of bioelectric events.The main purpose of this paper is to present a procedure for analysis of the effects of internal noise generated by the active circuits and to evaluate the output noise of the author‘s new designed bioelectric amplifier that caused by internal effects to the amplifier circuit itself in order to compare it with the noise generated by conventional amplifiers.The obtained analysis results of internally generated noise showed that the total output noise of bioelectric active circuits does not increase when some of their resitors have a larger value.This behavior is caused by the different transfer functions for the signal and the respective noise sources associated with these resistors.Moreover,the new designed bioelectric amplifier haws an output noise less than that for conventional amplifiers.The obtained analysis results were also experimentally verified and the final conclusions were drawn.     

Nanoengineering Hybrid Supramolecular Multilayered Biomaterials Using Polysaccharides and Self‐Assembling Peptide Amphiphiles

Developing complex supramolecular biomaterials through highly dynamic and reversible noncovalent interactions has attracted great attention from the scientific community aiming key biomedical and biotechnological applications, including tissue engineering, regenerative medicine, or drug delivery. In this study, the authors report the fabrication of hybrid supramolecular multilayered biomaterials, comprising high‐molecular‐weight biopolymers and oppositely charged low‐molecular‐weight peptide amphiphiles (PAs), through combination of self‐assembly and electrostatically driven layer‐by‐layer (LbL) assembly approach. Alginate, an anionic polysaccharide, is used to trigger the self‐assembling capability of positively charged PA and formation of 1D nanofiber networks. The LbL technology is further used to fabricate supramolecular multilayered biomaterials by repeating the alternate deposition of both molecules. The fabrication process is monitored by quartz crystal microbalance, revealing that both materials can be successfully combined to conceive stable supramolecular systems. The morphological properties of the systems are studied by advanced microscopy techniques, revealing the nanostructured dimensions and 1D nanofibrous network of the assembly formed by the two molecules. Enhanced C2C12 cell adhesion, proliferation, and differentiation are observed on nanostructures having PA as outermost layer. Such supramolecular biomaterials demonstrate to be innovative matrices for cell culture and hold great potential to be used in the near future as promising biomimetic supramolecular nanoplatforms for practical applications.     

Analysis of the semisynchronous carrier sense multiple access onthe bus topology

Consider an arbitrary number of stations equally spaced on a channel configured as a bus topology. The stations access the channel according to the nonpersistent CSMA protocol, which may be with or without collision detection. Users are synchronized to the propagation delay between two adjacent users, and are thus semisynchronized. Such a system with single-buffered users and an exponential backoff strategy, is modeled. The system throughput and the mean delay are evaluated, and it is shown how to obtain the distribution of the packet interdeparture time as well as the packet delay. It is shown that the rescheduling strategy has a profound effect on the station performance, and that it can be used to eliminate the difference between the performance of different stations at any given offered load. The model is also used to accommodate finer synchronization steps, as well as arbitrary topologies     

Investigation of directly suspended droplet micro extraction method for extraction of trihalomethane and halomethane in water samples

Simple and efficient directly suspended droplet micro extraction (DSDME) in conjunction with gas chromatography-electron capture detector (GC-ECD) has been developed for extraction and determination of Halomethane and Trihalomethane from water samples. In this technique a micro drop of n-hexane is delivered to the surface of an aqueous sample while being agitated by a stirring bar in the bulk of solution. Factors relevant to the extraction efficiency were studied and optimized. The optimized extraction conditions were extraction solvent: n- hexane; NaCl concentration: 1 M; solvent extraction volume: 50 μL; stirring rate: 720 rpm and the extraction time: 5 min. The detection limits of the method were in the range of 0.059–0.137 µg L^?1, relative standard deviation (n = 3) range were 0.019–0.048%. A good linearity (r² ≥ 0.997) and a relatively broad dynamic linear range (10–200 µg L^?1) were obtained and recoveries of method were in the range of 97.69–99.51%. Finally, the proposed method was successfully utilized for pre concentration and determination of halo methane in different real samples. Successfully DSDME technique combined with capillary GC-ECD for the analysis of THMs and HMs in the water investigated samples.     

Dearomatization of Diesel by Solvent Extraction: Influence of the Solvent Ratio and Temperature on Diesel Raffinate Properties

To comply with the stringent environmental regulations concerning the quality of fuels the production of ultra low sulfur fuels is obligatory. Consequently, the removal of aromatics from fuels has turned to be a serious issue. This is due to the fact that the presence of aromatics in fuel deters the ultra-low sulfur fuel production. Therefore the researcher’s interest has involved the dearomatization of fuels. As a result of the dearomatization, the quality of fuels improves tremendously. Here, solvent extraction was performed to dearomatize a feedstock sample with 20.1% aromatic and 166 ppm sulfur using acetonitrile. The extraction was performed at low temperature and ambient atmospheric pressure. The aromatic contents were determined via HPLC, while the ASTM methods were employed in other parameters determination. The results showed 72% minimum yield, 8.6% aromatic content, 58–64 cetane index, 73.2 ppm sulfur content, 5.4 viscosity, RI 1.4535, aniline point 82.15, specific gravity 0.824–0.812 with API 40.32–42.88 and flash point 70–78°C. The boiling range of the produced diesel fraction raffinate (172–373°C) that corresponds to C₈–C₂₄ cuts render it a potential candidate for other petrochemical applications.     

Tunable Thermoelectric Performance in Porous Armchair Graphene Nanoribbons as a Function of Strain,Pore Morphology and Temperature

In this paper, the thermoelectric performance of porous armchair graphene nanoribbons under tensile and compressive strain is investigated as a function of pore morphology and temperature. For all the porous structures irrespective of their pore size, the performance improves at a compressive strain of 10%, while for tensile nature, the minimum cut-off strain required for improved thermoelectric figure of merit (ZT) shows an inverse relation with the pore size. In addition, optimal pore shape geometry can yield better performance, even at lower values of strain. Further analysis reveals that tensile strain is not able to improve the performance at low and intermediate temperatures of around 300 K, whereas tensile/compressive strain is effective in enhancing the performance of porous armchair graphene nanoribbons at higher temperatures. Furthermore, the structures are found to be more sensitive to compressive strain than the tensile one since the effect of compressive strain is found to improve ZT more significantly. Our analysis based on Non-Equilibrium Green’s function calculations suggests a possible route for tailoring the functionality of nanomaterials so as to achieve great potentials for thermoelectric applications at various temperatures.     

A Comparison Study Between Pre-Equalization Schemes for Single and Multi Carrier Modulation Systems

In this paper, frequency domain pre-equalization (Pre-FDE) is developed for broadband cyclic prefix-code division multiple access (CP-CDMA) as a single carrier transmission scheme, and for multi carrier-CDMA (MC-CDMA) and orthogonal frequency division multiplexing (OFDM) as multi carrier transmission schemes. A comparison study is held between these schemes and the traditional equalization schemes. Experimental results show that pre-equalization improves significantly the performance of the single and multi carrier communication systems with a very low complexity at the receiver. The comparative study between MIMO pre-equalization for single carrier systems and for multi carrier systems shows that MIMO pre-equalization for single carrier systems outperforms that for multi carrier systems in terms of bit error rate (BER) performance since single carrier transmission has more frequency diversity than multi carrier transmission in the uncoded case.     

A Robust Wearable Point-of-Care CNT-Based Strain Sensor for Wirelessly Monitoring Throat-Related Illnesses

Point-of-care testing (POC) has the ability to detect chronic and infectious diseases early or at the time of occurrence and provide a state-of-the-art personalized healthcare system. Recently, wearable and flexible sensors have been employed to analyze sweat, glucose, blood, and human skin conditions. However, a flexible sensing system that allows for the real-time monitoring of throat-related illnesses, such as salivary parotid gland swelling caused by flu and mumps, is necessary. Here, for the first time, a wearable, highly flexible, and stretchable piezoresistive sensing patch based on carbon nanotubes (CNTs) is reported, which can record muscle expansion or relaxation in real-time, and thus act as a next-generation POC sensor. The patch offers an excellent gauge factor for in-plane stretching and spatial expansion with low hysteresis. The actual extent of muscle expansion is calculated and the gauge factor for applications entailing volumetric deformations is redefined. Additionally, a bluetooth-low-energy system that tracks muscle activity in real-time and transmits the output signals wirelessly to a smartphone app is utilized. Numerical calculations verify that the low stress and strain lead to excellent mechanical reliability and repeatability. Finally, a dummy muscle is inflated using a pneumatic-based actuator to demonstrate the application of the affixed wearable next-generation POC sensor.