Filling of a complex-shaped mold with a viscoelastic polymer. Part II: Comparison with experimental data

An experimental program has been carried out on a reciprocating screw injection molding machine in order to establish the validity of a proposed mathematical model for the filling stage of injection molding. A cavity of complex shape with an insert and variable thickness was constructed and used in these experiments. Good agreement between predicted (through computer simulation) and observed (through short-shot experiments and transducer response) results is obtained for free surface shapes and free surface locations with time. The theoretical pressure predictions are in fairly good agreement with experiments, with the maximum deviations occurring towards the end of filling and for longer filling times. This points towards the possibility that wall solidification during filling interacts with the flow processes across the gap of the cavity and makes necessary a more detailed characterization of the heat transfer at the melt/mold interface.     

Exhaust Emissions from an Engine Fueled with Biodiesel from High-Oleic Soybeans

Biodiesel is a fuel comprising mono-alkyl esters of medium to long-chain fatty acids derived from vegetable oils or animal fats. Typically, engines operated on soybean-based biodiesel exhibit higher emissions of oxides of nitrogen (NOx) compared with petroleum diesel. The increase in NOx emissions might be an inherent characteristic of soybean oil’s polyunsaturation, because the level of saturation is known to affect the biodiesel’s cetane number, which can affect NOx. A feedstock that is mostly monounsaturated (i.e. oleate) helps to balance the tradeoff between cold flow and oxidative stability. Genetic modification has produced a soybean event, designated 335-13, with a fatty acid profile high in oleic acid (>85%) and with reduced palmitic acid (<4%). This high-oleic soybean oil was converted to biodiesel and run in a John Deere 4045T 4.5-L four-stroke, four-cylinder, turbocharged direct-injection diesel engine. The exhaust emissions were compared with those from conventional soybean oil biodiesel and commercial No. 2 diesel fuel. There was a significant reduction in NOx emissions (α = 0.05) using the high-oleic soybean biodiesel compared with regular soybean oil biodiesel. No significant differences were found between the regular and high-oleic biodiesel for unburned hydrocarbon and smoke emissions.     

The impact of interaction quality factors on the effectiveness of Web-based information system: the mediating role of user satisfaction

Recently, IS researchers have focused on the assessment of Web-based information system (WBIS) at the individual level as it highly contributes to the organizations’ employees. The evaluation and development of WBIS is significantly needed because the top management is in need of justifying their costly IT investment in terms of its impacts on employee performance. For this purpose, this study is primarily concerned with the development and validation of new multidimensional instrument, and also a theoretical framework for assessing the impacts of user interface quality, online communication quality, and user satisfaction on the effectiveness of Web employee portals. The effectiveness is assessed in terms of contextual performance. In a large-scale study, a sample of 384 United Nations Relief and Works Agency for Palestine Refugees respondents are gathered in order to validate and check the reliability of the adapted study instrument. The results of validity and reliability analysis provide enough confidence to proceed toward validating the proposed theoretical framework. The results of multiple-regression analysis indicate that there is a positive significant relationship between user interface quality, communication quality, user satisfaction, and effectiveness at significance level (sig. < 0.01). As another important point, the results of hierarchical regression showed that user satisfaction has a mediating role on the relationship between user interface quality, communication quality, and contextual employee performance. The findings and implications of this research are discussed. Finally, it is expected that this study would contribute to empirical studies in the fields of IS and user behavior assessment.     

Cloning SIM Cards Usability Reduction in Mobile Networks

This paper studies the probability of using cloning subscriber identity module (SIM) cards in Universal Mobile Telecommunications Systems. It also explores how the mobile system can discover the cloning SIM cards as soon as possible and how to reduce the probability of using cloning SIM cards in mobile networks. The illegal mobile station attached to mobile networks can be detected by a Normal Location Area Update, a periodic area location update, and by outgoing calls that are issued from genuine mobiles. An analytical model is developed to investigate the effects of a location area update and outgoing calls issued by genuine mobiles on the use of illegal mobiles. Mobility management, such as registration, cancellation, and outgoing and incoming procedures for legal and illegal users are investigated and analysed. An analytical model to investigate the effect of outgoing call arrival rates, and location area residence time on the detected illegal user has been presented. This paper seeks to increase the security of communication by avoiding fraud of cloned mobile phones by proposing a solution to speed up the detection of cloning SIM cards.     

Evaluation of thermodynamic theories to predict interfacial tension between polystyrene and polypropylene melts

The commonly used thermodynamic theories (mean field theory and the square gradient theory) to predict interfacial tension between polymers have been modified. The results of these theoretical developments have not yet been fully tested and compared to experimental data. In this paper, experimental data for the effects of temperature, molecular weight, and molecular weight dispersity on interfacial tension for polypropylene/polystyrene polymer pairs are compared with the predictions of the new versions of the above theories. To evaluate these theories, it is necessary to know the Flory-Huggins interaction parameter for the polymer pairs studied. The relation correlating the Flory-Huggins interaction parameter to the Hildebrand solubility parameter was not suitable for evaluating the theoretical predictions of interfacial tension. Instead, the Flory Huggins interaction parameter was expressed as the sum of an enthalpic contribution, χ_H, and entropic contribution, χ_s. In the absence of reliable experimental values, a method was developed to evaluate the two contributions, based on interfacial tension data. The procedure provided an interaction parameter that is allowed to depend on molecular weight. When this approach was used, the predictions of only the new version of the square gradient theory were in good agreement with the experimental data for the influence of temperature and molecular weight on interfacial tension. However, the theory predicted the effect of polydispersity on interfacial tension only at high temperatures.     

An engineering study of the film embossing process

A mathematical model of the dynamics and heat transfer of the film embossing process has been developed. The thermal analysis around the preheat roll is determined from an unsteady, two-dimensional heat conduction equation along with appropriate boundary conditions by neglecting the curvature of the preheat roll and choosing a Lagrangian reference frame. The heat transfer occurring between the preheat roll and the embossing rolls is based on a one-dimensional analysis, including both convective and radiative effects. The deformation occurring in the nip region is analyzed for two different situations. For the case where the surface features are small in comparison with the film thickness, a modified one-dimennsional calendering analysis is given, accounting for the irregular geometry of the embossing roll surface. For the case where the polymer does not make complete contact with the surface of the engraved channel, the local deformation is determined by means of a simple one-dimensional cavity filling model. The required pressure distribution is determined by means of a simple one-dimensional cavity filling model, The required pressure distribution is determined by means of a conventional calendering analysis. The analysis for the case of a Newtonian and power-law model is presented in detail. The model yields qualitatively correct results and is computationally simple.     

Distributions of Crystal Size from DSC Melting Traces for Polyethylenes

Melting curves, obtained by differential scanning calorimetry, are used to estimate crystal size distributions. The proposed theoretical analysis is applied to different types of polyethylene, including high‐density polyethylene (HDPE), metallocene catalyzed linear low‐density polyethylenes (m‐LLDPE), blends of m‐LLDPEs, and Ziegler‐Natta catalyzed LLDPEs (ZN‐LLDPE). Theoretical predictions are in agreement with experimental results. A generalized melting temperature equation successfully predicts the melting temperatures of all the LLDPEs, although it was initially proposed for homogeneous copolymers with excluded comonomers. A new definition of the heat of fusion for pure crystals is proposed. This heat of fusion can be calculated from the average crystal size or the crystal size number distribution.     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

新疆农产品质量安全发展现状与对策

农产品质量安全直接关系到消费者的生存、生活和健康,越来越受到人们的普遍关注.主要分析了新疆农产品质量安全发展现状,并有针对性地提出了发展对策,要完善农产品质量安全监督管理法规体系、加快农业标准体系建设、依法开展农产品质量安全检验检测等.     

Corrosion behavior of tempered dual-phase steel embedded in concrete

Dual-phase(DP) steels with different martensite contents were obtained by appropriate heat treatment of an SAE1010 structural carbon steel,which was cheap and widely used in the construction industry. The corrosion behavior of DP steels in con-crete was investigated under various tempering conditions. Intercritical annealing heat treatment was applied to the reinforcing steel to obtain DP steels with different contents of martensite. These DP steels were tempered at 200,300,and 400°C for 45 min and then coo...