On the qualitative behaviors of solutions of third order nonlinear differential equations

We present some new results about oscillation and asymptotic behavior of solutions of third order nonlinear differential equations of the form

(r₂(t)(r₁(t)y^′)^′)^′+p(t)y^′+q(t)f(y(g(t)))=0.     

High sensitive optode for selective determination of Ni based on the covalently immobilized thionine in agarose membrane

A novel Ni²⁺ optode was prepared by covalent immobilization of thionine, 3,7-diamine-5-phenothiazoniom thionineacetate, in a transparent agarose membrane. Influences of various experimental parameters on Ni²⁺ sensing, including the reaction time, the solution pH and the concentration of reagents were investigated. Under the optimized conditions, a linear response was obtained for Ni²⁺ concentrations ranging from 1.00 × 10⁻¹⁰ to 1.00 × 10⁻⁷ mol l⁻¹ with an R² value of 0.9985. The detection limit (3σ) of the method for Ni²⁺ was 9.30 × 10⁻¹¹ mol l⁻¹. The influence of several potentially interfering ions such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Pb²⁺, Cu²⁺, Mn²⁺, Co³⁺, Cr³⁺, Al³⁺ and Fe³⁺ on the determination of Ni²⁺ was studied and no significant interference was observed. The membrane showed a good durability and short response time with no evidence of reagent leaching. The membrane was successfully applied for the determination of Ni²⁺ in environmental water samples.     

An expert system for automated recognition of patients with obstructive sleep apnea using electrocardiogram recordings

Obstructive sleep apnea (OSA) is a highly prevalent sleep disorder. The traditional diagnosis methods of the disorder are cumbersome and expensive. The ability to automatically identify OSA from electrocardiogram (ECG) recordings is important for clinical diagnosis and treatment. In this study, we proposed an expert system based on discrete wavelet transform (DWT), fast-Fourier transform (FFT) and least squares support vector machine (LS-SVM) for the automatic recognition of patients with OSA from nocturnal ECG recordings. Thirty ECG recordings collected from normal subjects and subjects with sleep apnea, each of approximately 8 h in duration, were used throughout the study. The proposed OSA recognition system comprises three stages. In the first stage, an algorithm based on DWT was used to analyze ECG recordings for the detection of heart rate variability (HRV) and ECG-derived respiration (EDR) changes. In the second stage, an FFT based power spectral density (PSD) method was used for feature extraction from HRV and EDR changes. Then, a hill-climbing feature selection algorithm was used to identify the best features that improve classification performance. In the third stage, the obtained features were used as input patterns of the LS-SVM classifier. Using the cross-validation method, the accuracy of the developed system was found to be 100% for using a subset of selected combination of HRV and EDR features. The results confirmed that the proposed expert system has potential for recognition of patients with suspected OSA by using ECG recordings.     

Numerical study of asymmetric laminar flow of micropolar fluids in a porous channel

A numerical study is presented for the two-dimensional flow of a micropolar fluid in a porous channel. The channel walls are of different permeability. The fluid motion is superimposed by the large injection at the two walls and is assumed to be steady, laminar and incompressible. The micropolar model due to Eringen is used to describe the working fluid. The governing equations of motion are reduced to a set of non-linear coupled ordinary differential equations (ODEs) in dimensionless form by using an extension of Berman’s similarity transformations. A numerical algorithm based on finite difference discretization is employed to solve these ODEs. The results obtained are further improved by Richardson’s extrapolation for higher order accuracy. Comparisons with the previously published work are performed and are found to be in a good agreement. It has been observed that the velocity and microrotation profiles change from the most asymmetric shape to the symmetric shape across the channel as the parameter R or the permeability parameter A are varied between their extreme values. The results indicate that larger the injection velocity at a wall relative to the other is, smaller will be the shear stress at it than that at the other. The position of viscous layer has been found to be more sensitive to the permeability parameter A than to the parameter R. The micropolar fluids reduce shear stress and increase couple stress at the walls as compared to the Newtonian fluids.     

Prediction of performance and exhaust emissions of a diesel engine fueled with biodiesel produced from waste frying palm oil

Biodiesel is receiving increasing attention each passing day because of its fuel properties and compatibility with the petroleum-based diesel fuel (PBDF). Therefore, in this study, the prediction of the engine performance and exhaust emissions is carried out for five different neural networks to define how the inputs affect the outputs using the biodiesel blends produced from waste frying palm oil. PBDF, B100, and biodiesel blends with PBDF, which are 50% (B50), 20% (B20) and 5% (B5), were used to measure the engine performance and exhaust emissions for different engine speeds at full load conditions. Using the artificial neural network (ANN) model, the performance and exhaust emissions of a diesel engine have been predicted for biodiesel blends. According to the results, the fifth network is sufficient for all the outputs. In the fifth network, fuel properties, engine speed, and environmental conditions are taken as the input parameters, while the values of flow rates, maximum injection pressure, emissions, engine load, maximum cylinder gas pressure, and thermal efficiency are used as the output parameters. For all the networks, the learning algorithm called back-propagation was applied for a single hidden layer. Scaled conjugate gradient (SCG) and Levenberg–Marquardt (LM) have been used for the variants of the algorithm, and the formulations for outputs obtained from the weights are given in this study. The fifth network has produced R² values of 0.99, and the mean % errors are smaller than five except for some emissions. Higher mean errors are obtained for the emissions such as CO, NO_x and UHC. The complexity of the burning process and the measurement errors in the experimental study can cause higher mean errors.     

An AP structure with Finslerian Flavor: Path equations

The Bazanski approach to deriving paths is applied to Finsler geometry. The approach is generalized and applied to a new developed geometry called “Absolute parallelism with Finslerian Flavor” (FAP). A set of path equations is derived for the FAP. It is a horizontal (h) set. A striking feature in this set is that the coefficient of the torsion term jumps by a step of one-half from one equation to the other. It is tempting to believe that the h-set admits some quantum features. Comparisons with the corresponding sets in other geometries are given. Conditions for reducing the set of path equations obtained to well-known path equations in some geometries are summarized in a schematic diagram.     

PETOOL: MATLAB-based one-way and two-way split-step parabolic equation tool for radiowave propagation over variable terrain

A MATLAB-based one-way and two-way split-step parabolic equation software tool (PETOOL) has been developed with a user-friendly graphical user interface (GUI) for the analysis and visualization of radio-wave propagation over variable terrain and through homogeneous and inhomogeneous atmosphere. The tool has a unique feature over existing one-way parabolic equation (PE)-based codes, because it utilizes the two-way split-step parabolic equation (SSPE) approach with wide-angle propagator, which is a recursive forward–backward algorithm to incorporate both forward and backward waves into the solution in the presence of variable terrain. First, the formulation of the classical one-way SSPE and the relatively-novel two-way SSPE is presented, with particular emphasis on their capabilities and the limitations. Next, the structure and the GUI capabilities of the PETOOL software tool are discussed in detail. The calibration of PETOOL is performed and demonstrated via analytical comparisons and/or representative canonical tests performed against the Geometric Optic (GO) + Uniform Theory of Diffraction (UTD). The tool can be used for research and/or educational purposes to investigate the effects of a variety of user-defined terrain and range-dependent refractivity profiles in electromagnetic wave propagation.

Program summary

Program title: PETOOL (Parabolic Equation Toolbox)Catalogue identifier: AEJS_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJS_v1_0.htmlProgram obtainable from: CPC Program Library, Queen?s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 143 349No. of bytes in distributed program, including test data, etc.: 23 280 251Distribution format: tar.gzProgramming language: MATLAB (MathWorks Inc.) 2010a. Partial Differential Toolbox and Curve Fitting Toolbox requiredComputer: PCOperating system: Windows XP and VistaClassification: 10Nature of problem: Simulation of radio-wave propagation over variable terrain on the Earth?s surface, and through homogeneous and inhomogeneous atmosphere.Solution method: The program implements one-way and two-way Split-Step Parabolic Equation (SSPE) algorithm, with wide-angle propagator. The SSPE is, in general, an initial-value problem starting from a reference range (typically from an antenna), and marching out in range by obtaining the field along the vertical direction at each range step, through the use of step-by-step Fourier transformations. The two-way algorithm incorporates the backward-propagating waves into the standard one-way SSPE by utilizing an iterative forward–backward scheme for modeling multipath effects over a staircase-approximated terrain.Unusual features: This is the first software package implementing a recursive forward–backward SSPE algorithm to account for the multipath effects during radio-wave propagation, and enabling the user to easily analyze and visualize the results of the two-way propagation with GUI capabilities.Running time: Problem dependent. Typically, it is about 1.5 ms (for conducting ground) and 4 ms (for lossy ground) per range step for a vertical field profile of vector length 1500, on Intel Core 2 Duo 1.6 GHz with 2 GB RAM under Windows Vista.     

An adaptive local binarization method for document images based on a novel thresholding method and dynamic windows

Binary image representation is essential format for document analysis. In general, different available binarization techniques are implemented for different types of binarization problems. The majority of binarization techniques are complex and are compounded from filters and existing operations. However, the few simple thresholding methods available cannot be applied to many binarization problems. In this paper, we propose a local binarization method based on a simple, novel thresholding method with dynamic and flexible windows. The proposed method is tested on selected samples called the DIBCO 2009 benchmark dataset using specialized evaluation techniques for binarization processes. To evaluate the performance of our proposed method, we compared it with the Niblack, Sauvola and NICK methods. The results of the experiments show that the proposed method adapts well to all types of binarization challenges, can deal with higher numbers of binarization problems and boosts the overall performance of the binarization.     

Determination of optimum pH and temperature for pasteurization of citrus juices by response surface methodology

Summary Optimization of microbial death, enzyme inactivation and vitamin C retention during pasteurization of pH-adjusted orange juice is discussed free of equipmentdependent parameters such as the heating lag. The pH-temperature optimum was determined by response surface methodology in the range of 65° C–75° C and pH 2.5–4.0. The results implied that there was no pectinesterase activity below pH 3.5.Leuconostoc mesenteroides had its maximum and minimum thermal resistance at pH 3.5 and pH 2.7, respectively. For an ideal theoretical process requiring four log cycles of microbial reduction the optimum pasteurization conditions were 12 min at 75° C and pH 2.7.

---

Bestimmung der optimalen Temperatur- und pH-Wert-Bedingungen für die Pasteurisierung von Citrussäften mit der response surface-Methode

Zusammenfassung Die Optimierung der mikrobiellen Abtötung, Enzyminaktivierung und Vitamin-C-Retention während der Pasteurisierung von Orangensaft mit verschiedenen pH-Werten wird, frei von Anlageneinflüssen, wie z. B. Erhitzungsverzögerungen, diskutiert. Das Temperatur-pH-Wert-Optimum wurde mit der response surface-Methode im Temperaturbereich von 65 bis 75 °C und pH-Werten zwischen 2,5 und 4,0 untersucht. Die Ergebnisse lassen darauf schließen, daß unter pH 3,5 keine Pectinesteraseaktivität mehr vorliegt.Leuconostoc mesentroides wies bei pH 2,7 minimale und bei pH 3,5 maximale Hitzeresistenz auf. In einem idealen theoretischen Pasteurisierungsprozeß, der eine Reduzierung der mikrobiellen Belastung um vier Größenordnungen erfordert, liegen die optimalen Bedingungen bei 12 min, 75 °C und einem pH-Wert von 2,7.

     

GENOTOXICITY IN CHIRONOMUS KIIENSIS (CHIRONOMIDAE: DIPTERA) AFTER EXPOSURE TO POLLUTED SEDIMENTS FROM RIVERS OF NORTH PENINSULAR MALAYSIA: IMPLICATION FOR ECOTOXICOLOGICAL MONITORING

Rapid industrialization and urbanization has led to increasing input of chemical contaminants into the aquatic environment of Malaysia. Despite the threat civilization poses to the biota, there are still very few relevant studies on ecotoxicological testing of river ecosystems. To overcome this knowledge gap, we examined lethal and genotoxic effects of sediments from different rivers of the northern Malaysia against Chironomus kiiensis, a group well represented in the aquatic fauna of this region. We exposed the larvae to sediments from Selama River (SR), Permatang Rawa River (PRR) and Kilang Ubi River (KUR) at various durations (0, 6, 12, 24 and 48 h). The larval mortality was monitored, whereas DNA damage in survivors' cells was determined using the comet assay. Pollution level indexed by the amounts of heavy metals and other organic contaminants in the sediment showed progressive increases from SR to PRR to KUR. Highly polluted sediments (PRR to KUR) were detrimental to C. kiiensis larvae, most of which did not survive following exposure for long periods. DNA analyses revealed greater damages in nuclei derived from larvae maintained on polluted sediments, in particular, those from KUR. The effects on the genomic material of C. kiiensis larvae occurred in a time‐dependent manner, with damage level increasing as exposure time progressed. Our results highlight the genotoxic properties of polluted sediments. More importantly, this study showed that C. kiiensis larvae could respond to different levels of pollution with respect to exposure time. It is concluded that C. kiiensis larvae is a potential candidate for river ecotoxicological monitoring. Copyright © 2012 John Wiley & Sons, Ltd.