Lipid hydrolysis and oxidation on the surface of milled rice

The changes in milled rice FFA content and composition and in conjugated diene (CD) content and bacterial, yeast, and mold counts were determined at 24, 37, and 50°C and 70% RH over 50 d. There was a rapid rate of FFA formation during the first few days of storage, which was optimal at 37°C, but that slowed after 2, 4, and 5 d at 37, 24, and 50°C, respectively. There was a second increase in FFA after about day 12 that increased with increasing temperature, indicating nonlipase hydrolysis. Linoleic and oleic acids were the main components of the total FFA produced on the surface of milled rice. The pattern of CD development followed that of FFA increase. Bacterial growth correlated with increased FFA levels after 12 d of storage, suggesting that bacterial lipase rather than bran lipase may be responsible for rice lipid hydrolysis     

Mesoscale simulation of block copolymers in aqueous solution: parameterisation, micelle growth kinetics and the effect of temperature and concentration morphology

In this work, we utilise ‘MesoDyn’ [J Chem Phys 99 (1993) 9202; 106 (1997) 4260] density functional simulations to study the effect of temperature and concentration on the micellar morphology of polymeric surfactants. Parameterisation strategies based upon atomistic models and experimental data are discussed. Taking the temperature dependence of interaction energy into account, the change in morphology of Pluronic (PEO-PPO-PEO) block copolymer structure with temperature is well reproduced. As a function of concentration, the diameter of spherical micelles is found to increase in line with previous cryo-TEM observations [Phys Chem Chem Phys 1 (1999) 3331]. Simulations of high concentration PEO-PBO diblock systems show ordering similar to the face-centered cubic structures found experimentally [J Polym Sci B 33 (1995) 1085; Macromolecules 30 (1997) 5721; Polymer 39 (1998) 4891; Phys Chem Chem Phys 1 (1999) 2773].     

Large-scale in vivo synthesis of the carbohydrate moieties of gangliosides GM1 and GM2 by metabolically engineered Escherichia coli

Two metabolically engineered Escherichia coli strains have been constructed to produce the carbohydrate moieties of gangliosides GM2 (GalNAcbeta-4(NeuAcalpha-3)Galbeta-4Glc; Gal = galactose, Glc = glucose, Ac = acetyl) and GM1 (Galbeta-3GalNAcbeta-4(NeuAcalpha-3)Galbeta-4Glc. The GM2 oligosaccharide-producing strain TA02 was devoid of both beta-galactosidase and sialic acid aldolase activities and overexpressed the genes for CMP-NeuAc synthase (CMP = cytidine monophosphate), alpha-2,3-sialyltransferase, UDP-GlcNAc (UDP = uridine diphosphate) C4 epimerase, and beta-1,4-GalNAc transferase. When this strain was cultivated on glycerol, exogenously added lactose and sialic acid were shown to be actively internalized into the cytoplasm and converted into GM2 oligosaccharide. The in vivo synthesis of GM1 oligosaccharide was achieved by taking a similar approach but using strain TA05, which additionally overexpressed the gene for beta-1,3-galactosyltransferase. In high-cell-density cultures, the production yields for the GM2 and GM1 oligosaccharides were 1.25 g L(-1) and 0.89 g L(-1), respectively.     

Effect of nano‐silica filler on the rheological and morphological properties of polypropylene/liquid‐crystalline polymer blends

A fumed hydrophilic nano‐silica‐filled polypropylene (PP) composite was blended with a liquid‐crystalline polymer (LCP; Rodrun LC5000). The preblended polymer blend was extruded through a capillary die; this was followed by a series of rheological and morphological characterizations. The viscosity of the PP matrix increased with the addition of the hydrophilic nano‐silica. At shear rates between 50 and 200 s^?1, the composite displays marked shear‐thinning characteristics. However, the incorporation of LC5000 in the PP composite eliminated the shear‐thinning characteristic, which suggests that LC5000 destroyed the agglomerated nano‐silica network in the PP matrix. Although the viscosity ratio of LCP/PP was reduced after the addition of nano‐silica fillers, the LCP phases existed as droplets and ellipsoids. The nano‐silicas were concentrated in the LC5000 phase, which hindered the formation of LCP fibers when processed at high shear deformation. We carried out surface modification of the hydrophilic nano‐silica to investigate the effect of modified nano‐silica (M‐silica) on the morphology of the PP/LC5000 blend system. Ethanol was successfully grafted onto the nano‐silica surface with a controlled grafting ratio. The viscosity was reduced for PP filled with ethanol‐M‐silica when compared to the system filled with untreated hydrophilic nano‐silica. The LC5000 in the (PP/M‐silica)/LC5000 blend existed mainly in the form of fibrils. At high shear rates (e.g., 3000 s^?1), the LC5000 fibril network was formed at the skin region of the extrudates. The exclusion of nano‐silica in the LC5000 phase and the increased viscosity of the matrix were responsible for the morphological changes of the LCP phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1484–1492, 2003     

Rapid On-Resin N-Formylation of Peptides as One-Pot Reaction

N-formylation is a common pre- and post-translational modification of the N-terminus or the lysine side chain of peptides and proteins that plays a role in the initiation of immune responses, gene expression, or epigenetics. Despite its high biological relevance, protocols for the chemical N-formylation of synthetic peptides are scarce. The few available methods are elaborate in their execution and the yields are highly sequence-dependent. We present a rapid, easy-to-use one-pot procedure that runs at room temperature and can be used to formylate protected peptides at both the N-terminus and the lysine side chain on the resin in near-quantitative yields. Only insensitive, storage-stable standard chemicals – formic acid, acetic anhydride, pyridine and DMF – are used. Formylation works for both short and long peptides of up to 34 amino acids and over the spectrum of canonical amino acids.     

ZnO nanorods surface-decorated by WO3 nanoparticles for photocatalytic degradation of endocrine disruptors under a compact fluorescent lamp

Nanoscaled tungsten oxide (WO₃) particles coated on ZnO nanorods (ZNRs) were newly synthesized by combining a hydrothermal technique with a chemical solution process. The structure, morphologies and compositions of the as-prepared WO₃–ZNR nanocomposites were characterized through XRD, FESEM, TEM and Raman measurements. The results revealed that pure monoclinic WO₃ nanoparticles with an average size range of 18–26 nm were distributed on the surfaces of ZNRs and attached strongly. Particularly, the optical properties as well as photocatalytic characteristics of pure ZNRs and WO₃–ZNR nanocomposites with different loadings of WO₃ were also examined. The absorption of WO₃–ZNR nanocomposites was redshifted due to effective immobilization of WO₃ on ZNRs. Under irradiation of a 55 W compact fluorescence lamp, the photocatalytic activities of the WO₃–ZNR nanocomposites were superior to those of pure ZNRs and P25 in the degradation of resorcinol (ReOH). Furthermore, WO₃–ZNR nanocomposites showed very favorable recycle use potential and high sedimentation rate. Other endocrine disrupting chemicals (EDCs) such as phenol, bisphenol A (BPA) and methylparaben were also successfully photodegraded under identical conditions. These characteristics showed the practical applications of the WO₃–ZNR nanocomposites in indoor environmental remediation.     

Bubble columns for condensation at high concentrations of noncondensable gas: Heat‐transfer model and experiments

Carrier gas based thermodynamic cycles are common in water desalination applications. These cycles often require condensation of water vapor out of the carrier gas stream. As the carrier gas is most likely a noncondensable gas present in very high concentrations (60–95%), a large additional resistance to heat transfer is present. It is proposed to reduce the aforementioned thermal resistance by condensing the vapor–gas mixture in a column of cold liquid rather than on a cold surface using a bubble column heat exchanger. A theoretical predictive model for estimating the heat‐transfer rates and new experimental data to validate this model are described. The model is purely physics based without the need for any adjustable parameters, and it is shown to predict heat rates within 0 to ?20% of the experimental values. The experiments demonstrate that heat‐transfer rates in the proposed device are up to an order magnitude higher than those achieved in existing state‐of‐the‐art dehumidifiers. © 2012 American Institute of Chemical Engineers AIChE J, 59: 1780–1790, 2013     

Vapochromism of Hexaphenylsilole

The photoluminescence (PL) of the thin layer of hexaphenylsilole (HPS) on thin-layer chromatograph (TLC) or quartz plate is investigated. The PL of the HPS layer absorbed on the TLC plate can be turned “off” and “on” continuously and reversibly by solvent exposure and evaporation. On the other hand, the PL of the HPS film coated on the quartz plate becomes stronger with a blue-shift in its emission color after fumigation by solvent vapor. After solvent removal, the film does not return to its original blue-green emission. Analyses by SEM, TEM and XRD indicate that the transformation from amorphous to crystalline state is responsible for the vapor-induced stronger and bluer PL.     

CD26 Induces Colorectal Cancer Angiogenesis and Metastasis through CAV1/MMP1 Signaling

CD26 has been reported as a marker for colorectal cancer stem cells endowed with tumor-initiating properties and capable of colorectal cancer (CRC) metastasis. In this study, we investigated the functional effect of CD26 on CRC angiogenesis and metastasis, and the potential underlying mechanism. The functional effects of CD26 overexpression or repression were determined by a wound healing experiment, and cell migration and invasion assays in vitro and in mouse models. Differentially expressed genes regulated by CD26 were identified by genome-wide mRNA expression array and validated by quantitative PCR. CD26 functionally regulated CRC cell migration and invasion in vitro and angiogenesis and metastasis in vivo. Genome-wide mRNA expression array and qPCR showed that MMP1 was up-regulated in CD26+ subpopulation, and a subsequent experiment demonstrated the regulatory effect of CD26 on MMP1 in CRC cell lines with CD26 repression or overexpression. Furthermore, overexpression of CAV1 abrogated the CD26-regulated MMP1 induction in CRC cell lines. This study demonstrated the functional roles of CD26 in inducing CRC migration, invasion, angiogenesis and metastasis and identified the potential involvement of MMP1 and CAV1 in such process. CD26 is an attractive therapeutic target for combating tumor progression to improve the prognosis of CRC patients.     

Influences of graphene oxide support on the electrochemical performances of graphene oxide-MnO2 nanocomposites

MnO₂ supported on graphene oxide (GO) made from different graphite materials has been synthesized and further investigated as electrode materials for supercapacitors. The structure and morphology of MnO₂-GO nanocomposites are characterized by X-ray diffraction, X-ray photoemission spectroscopy, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and Nitrogen adsorption-desorption. As demonstrated, the GO fabricated from commercial expanded graphite (denoted as GO(1)) possesses more functional groups and larger interplane gap compared to the GO from commercial graphite powder (denoted as GO(2)). The surface area and functionalities of GO have significant effects on the morphology and electrochemical activity of MnO₂, which lead to the fact that the loading amount of MnO₂ on GO(1) is much higher than that on GO(2). Elemental analysis performed via inductively coupled plasma optical emission spectroscopy confirmed higher amounts of MnO₂ loading on GO(1). As the electrode of supercapacitor, MnO₂-GO(1) nanocomposites show larger capacitance (307.7 F g^-1) and better electrochemical activity than MnO₂-GO(2) possibly due to the high loading, good uniformity, and homogeneous distribution of MnO₂ on GO(1) support.