Relapse crises and coping among dieters.

We examined situational antecedents of dieting relapse crises and dieters' attempts to cope with temptations to overeat. We analyzed postreatment interviews with 57 obese Ss with Type II diabetes, comparing situations in which Ss lapsed with those in which they overcame temptation to overeat. Cluster analysis yielded 3 categories of relapse crises: mealtime, low-arousal, and emotional upset situations. The cluster differed in outcome: Upset situations almost always resulted in overeating; situational factors, especially food-related cues, increased relapse risk; but performance of coping was the strongest correlate of outcome. Cognitive and behavioral coping responses were each equally associated with positive outcomes. When Ss reported combining both types of coping, they were less likely to report overeating. The dynamics of relapse crises among dieters resemble those that govern relapse crises in addictive behaviors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Internalin B promotes the replication of Listeria monocytogenes in mouse hepatocytes

The uptake of Listeria monocytogenes by a variety of cell types in vitro is facilitated by the protein products of the inlAB (internalin) operon expressed by the organism. In the case of mouse hepatocytes, the extent to which inlAB expression influenced the uptake of Listeria in vitro was markedly dependent upon the ratio of bacteria to cells. At a ratio of 100:1, greater than 40-fold fewer transposon-induced inl4B mutant listeriae entered hepatocytes compared to the isogenic wild-type control; the difference was only fourfold, however, in cultures inoculated at a 1:1 ratio. Similarly, the uptake of in-frame inlB or inlAB deletion mutants differed only fourfold from the uptake of wild-type or inlA mutant Listeria at a 1:1 multiplicity of infection. Mutations affecting inlB or inlAB, on the other hand, resulted in a marked decrease in the capacity of Listeria to proliferate within mouse hepatocytes in vivo and in vitro. Electron micrographs of Listeria-infected hepatocytes demonstrated the impaired capacity of inlB mutants to escape from endocytic vacuoles and to enter the cytoplasm where proliferation occurs. These findings indicate that the protein product of inlB exerts a significant effect on the intracellular replication of Listeria.     

Double blind, randomised, placebo controlled study of oral vancomycin in prevention of necrotising enterocolitis in preterm, very low birthweight infants

AIMS: To evaluate the effectiveness of oral vancomycin in the prophylaxis of necrotising enterocolitis in preterm, very low birthweight infants. METHODS: A prospective, double blind, randomised, placebo controlled study in a tertiary referral centre of a university teaching hospital was conducted on 140 very low birthweight infants consecutively admitted to the neonatal unit. The babies were randomly allocated to receive oral vancomycin (15 mg/kg every 8 hours for 7 days) or an equivalent volume of placebo solution. Prophylaxis was started 24 hours before the start of oral feeds. All suspected cases of necrotising enterocolitis were investigated with a full sepsis screen and serial abdominal radiographs. Necrotising enterocolitis was diagnosed and staged according to modified Bell's criteria. RESULTS: Nine of 71 infants receiving oral vancomycin and 19 of 69 infants receiving the placebo solution developed necrotising enterocolitis (p = 0.035). Infants with necrotising enterocolitis were associated with a significant increase in mortality (p = 0.026) and longer duration of hospital stay (p = 0.002). CONCLUSIONS: Prophylactic oral vancomycin conferred protection against necrotising enterocolitis in preterm, very low birthweight infants and was associated with a 50% reduction in the incidence. However, widespread implementation of this preventive measure is not recommended, as it would only be effective in necrotising enterocolitis caused by Gram positive organisms and could increase the danger of the emergence of vancomycin resistant or dependent organisms. Its use should be restricted to a high prevalence nursery for a short and well defined period in a selected group of high risk patients.     

A randomized algorithm for natural object colorization

Natural objects often contain vivid color distribution with wide variety of colors. Conventional colorization techniques, on the other hand, produce colors that are relatively flat with little color variation. In this paper, we introduce a randomized algorithm which considers not only the value of target color but also the distribution of target color. In essence, our algorithm paints a color distribution to a region which synthesizes color distribution of a natural object. Our approach models the correlation between intensity and color in HSV color space in terms of H – S, H – V and S – V joint histogram. During the colorization process, we randomly swap and reassign color of a pixel to minimize a cost function that measures color consistency to its neighborhood and intensity‐to‐color correlation captured in the joint histogram. We tested our algorithm extensively on many natural objects and our user study confirms that our results are more vivid and natural compared to results from previous techniques.     

Regeneration of zinc particles for zinc–air fuel cells in a spouted-bed electrode

Fuel cells wherein zinc particles form a negative electrode and a gas-diffusion electrode (air electrode) is the positive electrode, are under development. Such cells are dependent on the regeneration of the zinc particles (and electrolyte). This paper describes experiments on electrolytic cells equipped with spouted bed cathodes for use in this application. Experiments have been carried out on laboratory scale cells to determine the operability of cells for growing 'seed particles in the range from 0.4 to 1 mm to measure cell voltage and current efficiency (and thereby energy consumption rate), and to identify a suitable material that could be used as a diaphragm (separating the spouted bed from the oxygen evolving anode). A larger cell, capable of producing up to 10 kg Zn per day, was designed and built. The larger cell was run successfully fifteen times and showed cell voltages and energy consumption rates comparable with those of smaller cells.     

X-Ray, Micro-Raman, Optical Absorption/Emission Studies of ErNbO4 Grown by Vapor Transport Equilibration

Vapor transport equilibration (VTE) treatments were performed on a Y-cut bulk Er (1.6 mol%)-doped congruent LiNbO₃ crystal and an X-cut pure congruent crystal, on one surface of which a 40 nm-thick film of erbium metal was coated before the VTE treatment. Scanning electron microscope, powder or single-crystal X-ray diffraction (XRD), polarized infrared absorption/emission of Er³⁺ as well as micro-Raman spectroscopy were used to study the two VTE crystals. The results are discussed in comparison with a corresponding as-grown bulk Er-doped crystal, calcined ErNbO₄ powder, and a locally Er-doped congruent LiNbO₃ crystal prepared by using the standard Er-diffusion technique. The experimental results show that the VTE treatment induces the formation of micrometer-sized ErNbO₄ precipitates with the crystallographic morphology of a flat polyhedron not only on the surfaces of both crystals but also in the bulk of the homogeneously Er-doped one. The optical absorption and emission studies show that the formation of the precipitates results in substantial spectral changes in both the 0.98 and 1.5 μm regions. The micro-Raman studies allow to resolve four additional Raman peaks around 800 cm⁻¹ in the E(TO) spectra of the two VTE crystals. These additional Raman peaks are associated with the characteristic vibrations with respect to the NbO₄³⁻ group. Characteristic XRD, optical absorption, and emission and Raman peaks for identifying the ErNbO₄ phase are proposed. Finally, the formation mechanism and light-scattering effect of the precipitates are discussed.     

IT capability and organizational performance: the roles of business process agility and environmental factors

The business value of information technology (IT) has been one of the top concerns of both practitioners and scholars for decades. Numerous studies have documented the positive effects of IT capability on organizational performance but our knowledge of the processes through which such gains are achieved remains limited due to a lack of focus on the business environment. Such a linkage therefore remains the subject of debate in the information systems literature. In this study, we fill this gap by investigating the mediating role of business process agility and the moderating roles of environmental factors. On the basis of matched survey data obtained from 214 IT and business executives from manufacturing firms in China, our analyses show that even though firm-wide IT capability presents the characteristics of rarity, appropriability, non-reproducibility, and non-substitutability, its impact on organizational performance is fully mediated by business process agility. Our results also show that the impact of the environment is multifaceted and nuanced. In particular, environmental hostility weakens the effect of IT capability on business process agility, while environmental complexity strengthens it. The theoretical and practical implications of this study, and its limitations, are also discussed.     

Micromechanical properties on the surface of PVC/SBR blends spatially resolved by a nanoindentation technique

The microhardness and micromodulus on the surface of poly(vinyl chloride) (PVC)/styrene‐butadiene rubber (SBR) blends were determined using a nanoindenter. A flat surface was obtained by microtoming the sample at ?100°C in liquid nitrogen. Dozens of indents along a line with a spatial interval of 0.5 μm were performed. From the loading and unloading curves of each indentation, the stiffnesses of the unloading curve and the contact area between the sample and the indenter were evaluated, and the local modulus and hardness were calculated. Profiles of the local hardness and modulus were obtained from the lines of indents. Pure PVC and a miscible PVC/acrylonitrile‐butadiene rubber (NBR) (40/10) blend showed constant modulus and hardness values. In the case of an immiscible PVC/SBR (50/50) blend, which has a morphology of elongated PVC droplets in the SBR matrix, the hardness and modulus profiles showed regions of the different phases. At the interface between the SBR and PVC phases, a step change in the modulus and hardness profiles was observed. The force required to deform the material at the same displacement increased systematically across the interface from the SBR to the PVC phase because of the increasing contribution of the PVC phase. Polym. Eng. Sci. 44:609–614, 2004. © 2004 Society of Plastics Engineers.     

The role of the Tm3+ concentration on CaMoO4 properties processed by microwave hydrothermal under stirring condition

The compounds based on calcium molybdate (CaMoO₄) are the subject of extensive research due to their excellent optical properties and a broad range of potential technological applications. In this work, we report a systematic study of CaMoO₄:Tm³⁺ phosphors synthesized by coprecipitation and processed in a microwave-hydrothermal system at low temperature (100°C) and stirring. The effect of the Tm³⁺ doping content (0%–12%) is studied in full detail to understand their role in the CaMoO₄:Tm³⁺ morphological, structural, and luminescent properties. The X-ray diffraction, Raman, and Fourier Transform Infrared spectroscopic techniques revealed that all the prepared powders have a tetragonal crystal structure with a distinct density of cation vacancies and structural disorders. The band gap remains almost constant for doping levels lower than 8%, but it narrows strongly for powders doped with 12% Tm³⁺ ions. The designed phosphors have shown two emission bands in which intensity depends on the Tm³⁺ ions doping level. For doping levels lower than 2%, the photoluminescence profile displays a broad emission band peaking at 543 nm (green). For concentrations higher than 4%, the band centered at 543 nm decreases in intensity and the near-infrared emission band at around 800 nm, assigned to ³F₃, ³H₄ → ³H₆ transitions from Tm³⁺ ion, become more intense. The outcomes of this work reveal that appropriated Tm³⁺ ions doping levels can be applied to suppress the PL emission in the visible range and improve that in the near-infrared region in CaMoO₄-based materials.