炼油厂区内新建项目改扩建施工现场灭火器配置的分析

在对石油化工改扩建工程施工现场火灾危险因素识别评估的基础上，判定现场火灾危险等级、火灾类别，对灭火级别和保护距离进行验算，提出施工现场灭火器选型和配置方案。     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

冷却排管的节能设计

从节能的观点出发，根据热力学原理和传递过程的理论，对冷却排管内湍流传热过程进行分析，研究损失随雷诺数的变化规律，探讨冷却排管的节能设计问题。     

影响聚合物段塞流变性因素的研究

本文针对我国表面活性剂/聚合物驱油的实际,研究了石油磺酸盐(PS)、正丁醇(R_4OH)和矿化水对水解聚丙烯酰胺(HPAM)溶液流变性的影响。结果表明,PS对HPAM溶液流变性的影响与介质的矿化度有关:非矿化水介质中,PS对HPAM溶液性质的影响类似于无机盐,能降低HPAM溶液的表现粘度(η_α)和稠度系数(k);当系统中含有一定浓度矿化水时,PS却能升高系统的η_α和k值,降低流型指数(n),使系统的非牛顿性增强。在含有PS和矿化水的HPAM系统中加入R_4OH,系统的η_α和k值会有所增加。     

预测控制算法的统一格式及其在电加热炉的应用

本文根据常用的两类预测控制算法推出一种新型预测控制算法。并将其应用于一双输入/双输出的力学持久机电加热炉的温度控制系统上,获得了满意的结果:控温精度为±1.5℃/300℃,且适用于非最小相位系统。     

Procedures for analysis of strain transfer in the acetabular region in vitro

The failure of acetabular cups via loosening, migration or fracture is partially related to the stress distribution existing in the acetabular region. The complexity of the investigation of these stresses demands the application of a variety of model testing techniques involving combined embedded strain gauging, finite element analysis, transmission and reflective photoelasticity and crack propagation studies. The application of these procedures are described and the difficulties of obtaining representative loadings and restraints are commented upon.     

浅析深层搅拌桩的材料使用

本文就深层搅拌桩施工材料使用存在的一些问题进行分析总结。     

Continuous and discontinuous fatigue crack growth of irradiated ultrahigh molecular mass polyethylene in saline solution at 37°C

To provide data for prosthesis design, the fatigue crack growth resistance of irradiated ultrahigh molecular mass polyethylene (UHMMPE) in saline solution at 37°C was determined from tests performed on compact tension specimens, comparable in size to the components in knee prostheses. The specimens were cyclically loaded by using a sinusoidal wave form at 1 Hz with a minimum-to-maximum load ratio of 0.1. Scanning electron microscopic fractography was used to examine the fracture surfaces. At higher stress levels, the Paris's Law was used to analyse the data, and a striation pattern with each striation corresponding to multi-cycles was observed. At lower stress levels, discontinuous fatigue crack growth was found, a phenomenon which dominated the fatigue life of the material and had not been reported previously in this material. A craze zone ahead of the crack tip was observed, which formed the discontinuous crack growth band with a length relevant to the Dugdale plastic zone length.     

基于广义最小均方的自适应递归滤波算法

本文提出了一种广义最小均方(GLMS)算法,分析了GLMS算法的性能,并根据GLMS算法,导出一种自适应递归滤波(ARF)算法。在推导中,ARF算法避开了超稳定定理,从而考虑自适应系统的严格正实条件和Popov不等式是不必要的。计算机模拟表明ARF算法具有很高的收敛速度。     

Dynamic Survivability in WDM Mesh Networks Under Dynamic Traffic

Network survivability is a crucial requirement in WDM mesh networks. In this paper, we systematically consider the problem of dynamic survivability with dynamic single link failure in WDM networks under dynamic traffic demands. Specifically, we investigate various protection schemes, such as dedicated path protection (DPP), shared path protection (SPP), dedicated link protection (DLP), shared link protection (SLP), and two restoration schemes, path restoration (PR) and link restoration (LR). Moreover, two new shared protection methods are proposed, i.e., SRLG-based shared link protection (SRLG-SLP) and SRLG-based shared path protection (SRLG-SPP). The SRLG (shared risk link group) constraint defines the availability of protection resources to a working path, which requires that any two working paths sharing the same risk of failure (or in the same SRLG) cannot share the same protection resources. Furthermore, in our study, we consider a more practical dynamic single-link failure model, in which the link-failure-interarrival time and link-failure-holding time are considered as two independent parameters. Based on this link-failure model, extensive simulations are done to analyze and compare the dynamic survivable performance of various protection and restoration schemes. Resource utilization, protection efficiency, restoration efficiency, and service disruption ratio are employed as survivable performance metrics versus traffic load, link-failure frequency, and link-failure reparation time to evaluate the survivable performance. Many meaningful results are given. In addition, we show that the developed SRLG-SLP and SRLG-SPP protection schemes perform very well in terms of protection efficiency and service disruption ratio, while sacrificing some performance in terms of resource utilization.