煤焦油加工技术的探讨

煤焦油曾为近代有机化工作出了历史性贡献。我国煤焦油资源丰富,但尚未得到有效和合理利用。根据高温煤焦油的组成特点,对煤焦油的初馏、沥青加工利用和煤焦油产品的深加工技术进行了探讨,提出一些建议。此外还讨论了煤焦油加工企业的发展模式。     

Effect of cobalt oxide on surface structure of alumina supported molybdena catalysts studied by in situ Raman spectroscopy

A set of Co promoted 10% Mo/Al₂O₃ samples have been characterized by means of Raman spectroscopy under ambient as well as in situ dehydrated conditions. Under ambient conditions, the degree of the polymerization of surface molybdenum oxide species decreases with increasing Co loading. Under dehydrated conditions, the polymeric molybdenum oxide species is absent with the addition of only 0.2% Co. At low Co loadings (2%), before the formation of CoMoO₄ compound, the spectral features are very similar under ambient conditions. Dehydration causes the upward shift of the Mo=O symmetric stretching mode. A broad band around 920–930 cm^–1 was thus observed. This band has been suggested to be associated with the Co-Mo interaction species. In contrast to crystalline CoMoO₄, this species shows a reversibility on H₂ reduction-O₂ reoxidation treatments. From the results obtained, it is proposed that cobalt oxide interacts with the most polymerized molybdenum oxide species to form Co-Mo interaction species and/or crystalline CoMoO₄; therefore, the amount of the surface molybdenum oxide species decreases with a change in the molecular structure as a function of the Co concentration.     

Catalytic activities and properties of mesoporous sulfated Al2O3–ZrO2

Mesoporous sulfated Al₂O₃–ZrO₂ (MSAZ) catalysts with large surface areas and pore volumes after calcination at high temperature (650 °C) and with higher Al₂O₃ content than 20wt% were successfully prepared from a template of block copolymer (P84). The MSAZ catalysts were characterized by X-ray diffraction (XRD), N₂ adsorption, transmission electron microscopy (TEM), ²⁷Al magic-angle spinning nuclear magnetic resonance (MAS NMR), thermogravimetric analysis (TG–DTG), temperature-programmed desorption of ammonia (NH₃-TPD) and infrared spectra (IR) of adsorbed pyridine. It is shown that the resulting mesostructured sulfated Al₂O₃–ZrO₂ samples have a well-developed textural mesoporosity. The number of acid sites present on MSAZ catalysts is higher than that on conventional sulfated zirconia, and the former catalysts are more active than the latter one for various acid-catalyzed reactions.     

Kinetics of epoxy resins formation from bisphenol-A,bisphenol-S,and epichlorohydrin

The kinetics of formation of epoxy resins derived from bisphenol-A, bisphenol-S, and epichlorohydrin under stoichiometric conditions was considered. The kinetics of reaction was studied by taking into account the consumption of the added alkali and epoxide value of epoxide oligomers. The obtained results satisfactorily explained that the reactivity of bisphenol-A with epichlorohydrin is higher than that of bisphenol-S, the rate of dehydrochlorination of chlorohydrin ether in the presence of alkali and water is much higher than that of the rate of condensation of phenolic hydroxyl group with epichlorohydrin. The apparent reaction order of phenolic groups with epichlorohydrin and terminal epoxide group in the oligomer are all second order. The rate constants and activation energy were determined. The results are discussed. © 1993 John Wiley & Sons, Inc.     

Preparation and Photoluminescence of Partially Filled ZnO Microtubes Using Block Copolymers

Partially filled ZnO microtubes were synthesized in large scale using block copolymers. The growth mechanism of this unique construction is proposed on the basis of adsorption of block copolymers on {0002} plane of wurtzite ZnO. The photoluminescence property of these unique ZnO microtubes is also studied using a Xe lamp as the excitation source at room temperature. Blue emission band at 425 nm is a much stronger ultraviolet emission band, which is due to laminar structure of ZnO microtubes.     

累托石矿物提纯工艺探讨

以B03作分散剂,对湖北省钟祥县杨榨累托石粘土矿物进行了机械搅拌擦洗,使累托石矿物微粒较充分地分散解离,然后通过离心力场的作用,使累托石与水云母、叶腊石、绿泥石、石英等脉石矿物分离,累托石精矿纯度达90％左右,B03的使用为工业生产高纯累托石产品奠定了基础。     

国内外型焦生产工艺及发展前景

介绍了国内外型焦技术的生产工艺、型煤碳化的过程和影响因素,以及国内目前几种碳化窑炉,通过对型焦和焦炭的对比分析,指出洁净型焦生产技术的优势必然会使它在未来具有巨大的发展空间。     

直纺长丝工艺中聚酯熔体端羧基值控制的工业研究

本文从工业生产的实践出发对杜邦聚酯技术直接纺工艺中端羧基控制进行了研究。通过对熔体端羧基值对无油长丝端羧基、粘度及纺丝加工影响的分析 ,阐明了聚酯端羧基控制范围 ;通过摸索三个反应釜工艺条件对端羧基值的影响 ,找出了端羧基工业控制的有效途径 ,为同类技术装置生产提供了依据     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.