Microstructural and Tribological Properties of A356 Al–Si Alloy Reinforced with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Particles

In the present study, the effect of the Al₂O₃ particles (average size of 12 μm, 3 and 10 wt.%) reinforcement on the microstructure and tribological properties of Al–Si alloy (A356) was investigated. Composites were produced by applying compocasting process. Tribological properties of unreinforced alloy and composites were studied, using pin-on-disc tribometer, under dry sliding conditions at different specific loads and sliding speed of 1 m/s. Microhardness measurements, optical microscope and scanning electron microscope were used for microstructural characterization and investigation of worn surfaces and wear debris. During compocasting of A356 alloy, a transformation from a typical dendritic primary α phase to a non-dendritic rosette-like structure occurred. Composites exhibited better wear resistance compared with unreinforced alloy. Presence of 3 wt.% Al₂O₃ particles in the composite material affected the wear resistance only at specific loads up to 1 MPa. The wear rate of composite with 10 wt.% Al₂O₃ particles was nearly two order of the magnitude lower than the wear rate of the matrix alloy. Dominant wear mechanism for all materials was adhesion, with others mechanisms: oxidation, abrasion and delamination as minor ones.     

A modified dual current mode control method with an adaptive current bandwidth

In this paper, a new adaptive dual current mode control method (ADCMC) is presented, being a result of the modification of existing dual current mode control (DCMC) by introducing an adaptive current bandwidth. The ADCMC offers several important advantages over DCMC, such as no peak‐to‐average error in the inductor current, better transient response of current loop, and improved line regulation. A detailed analysis of the proposed ADCMC is performed for three types of DC–DC power electronics converters: buck, boost, and non‐inverting buck–boost converter. The performances of the ADCMC are tested with simulations and experiments. The obtained results confirm the analysis and validity of the proposed ADCMC method. Copyright © 2015 John Wiley & Sons, Ltd.     

“Quinone Millipedes” Reconsidered: Evidence for a Mosaic-Like Taxonomic Distribution of Phenol-Based Secretions across the Julidae

The defensive chemistry of juliformian millipedes is characterized mainly by benzoquinones (”quinone millipedes”), whereas the secretions of the putative close outgroup Callipodida are considered to be exclusively phenolic. We conducted a chemical screening of julid secretions for phenolic content. Most species from tribes Cylindroiulini (15 species examined), Brachyiulini (5 species examined), Leptoiulini (15 species examined), Uncigerini (2 species examined), Pachyiulini (3 species examined), and Ommatoiulini (2 species examined) had non-phenolic, in most cases exclusively benzoquinonic secretions. In contrast, tribes Cylindroiulini, Brachyiulini, and Leptoiulini also contained representatives with predominantly phenol-based exudates. In detail, p-cresol was a major compound in the secretions of the cylindroiulines Styrioiulus pelidnus and S. styricus (p-cresol content 93 %) and an undetermined Cylindroiulus species (p-cresol content 51 %), in the brachyiulines Brachyiulus lusitanus (p-cresol content 21 %) and Megaphyllum fagorum (p-cresol content 92 %), as well as in an undescribed Typhloiulus species (p-cresol content 32 %, Leptoiulini). In all species, p-cresol was accompanied by small amounts of phenol. The secretion of M. fagorum was exclusively phenolic, whereas phenols were accompanied by benzoquinones in all other species. This is the first incidence of clearly phenol-dominated secretions in the Julidae. We hypothesize a shared biosynthetic route to phenols and benzoquinones, with benzoquinones being produced from phenolic precursors. The patchy taxonomic distribution of phenols documented herein supports multiple independent regression events in a common pathway of benzoquinone synthesis rather than multiple independent incidences of phenol biosynthesis.     

Optimization of bioprocess for production of copper-enriched biomass of industrially important microorganism Saccharomyces cerevisiae

The production of Saccharomyces cerevisiae cells enriched with copper and the effects of adding copper ions to different media on yeast cell growth and ethanol production were studied. In the media Cu(2+) concentrations of up to 0.094 mM had no effect on alcoholic fermentation, whereas higher Cu(2+) concentrations markedly decreased yeast cell growth rate and ethanol production. Under static conditions, the maximum amounts of copper uptake (i.e., 1.16 mg/g, 1.2 mg/g and 0.81 mg/g dry matter yeast biomass for glucose, sucrose and molasses media, respectively) were obtained after 8 h of fermentation, whereas under dynamic conditions smaller amounts of copper uptake (i.e., 0.98 mg/g, 1.02 mg/g and 0.7 mg/g dry matter yeast biomass for glucose, sucrose and molasses media, respectively) were obtained after 6 h of fermentation.     

Defining a strategy for chemical imaging of industrial pharmaceutical samples on Raman line-mapping and global illumination instruments

The performance of line-mapping and global illumination Raman systems for two pharmaceutical tablets and a powder blend are assessed in this study. The chemical images were obtained from the placebo, real tablets, and powder blend by using x20, x50, and x100 objectives, as well as via the (pseudo) confocal set-up. The chemical images were produced via univariate wavenumbers and as re-folded principal component (PC) scores (known as score images). In most cases it was easy to image two or three major components of the tablets directly, while the minor components were only imaged via PC scores. The active pharmaceutical ingredients (APIs) were located relatively easily even if present in quite low concentrations (less than 1%) owing to the high Raman scattering coefficients of these materials. The strength of the Raman signal of the API makes it almost ubiquitous in the chemical images of real tablets. Thorough discussion is given on the strategies used to produce chemical images, the prospects of making composite images of all components present in the tablets, and the effects of packing density with relation to the diffusion of the excitation laser light inside the sample. The strengths and weaknesses of the Raman imaging techniques used are emphasized and suggestions are given regarding which instrument is preferable with respect to the goal of the experiment and material under study. For example, mapping technology is preferred for analyzing minor components, while the global illumination approach is recommended for imaging of spatially isolated strong Raman scatterers.     

Estimation of sedimentation rate in the Middle and South Adriatic Sea using 137Cs

(137)Cs activity concentrations were studied in the sediment profiles collected at five locations in the Middle and South Adriatic. In the sediment profiles collected from the South Adriatic Pit, the deepest part of the Adriatic Sea, two (137)Cs peaks were identified. The peak in the deeper layer was attributed to the period of intensive atmospheric nuclear weapon tests (early 1960s), and the other to the Chernobyl nuclear accident (1986). Those peaks could be used to estimate sedimentation rates by relating them to the respective time periods. Grain-size analysis showed no changes in vertical distribution through the depth of the sediment profile, and these results indicate uniform sedimentation, as is expected in deeper marine environments. It was not possible to identify respective peaks on more shallow locations due to disturbance of the seabed either by trawlers (locations Palagru?a and Jabuka) or by river sediment (location Albania). The highest sedimentation rates were found in Albania (～4 mm y(-1)) and Jabuka (3.1 mm y(-1)). For Palagru?a, the sedimentation rate was estimated to be 1.8 mm y(-1), similar to the South Adriatic Pit where the sedimentation rate was estimated to be 1.8±0.5 mm y(-1). Low sedimentation rates found for the Middle and South Adriatic Sea are consistent with previously reported results for the rest of the Mediterranean.     

Influence of T4 Heat Treatment on Tribological Behavior of Za27 Alloy Under Lubricated Sliding Condition

The effects of heat treatment on the microstructure, hardness, tensile properties, and tribological behavior of ZA27 alloy were examined. The alloys were prepared by conventional melting and casting route. The heat treatment of samples included the heating up to 370 °C for 3 or 5 h, quenching in water, and natural aging. Lubricated sliding wear test were conducted on as-cast and heat-treated ZA27 samples using block-on-disc machine. The friction and wear behavior of alloys were tested in contact with steel discs using combinations of three levels of load (10, 30, and 50 N) and three levels of linear sliding speeds (0.26, 0.50, and 1.00 m/s). To determine the wear mechanisms, the worn surfaces of the samples were examined by scanning electron microscopy (SEM). The heat treatment resulted in reduction in the hardness and tensile strength but increase in elongation. The heat-treated alloy samples attained improved tribological behavior over the as-cast ones, under all combinations of sliding speeds and contact loads. The rate of improvement increased with duration of solutionizing process before quenching in water. Obtained tribological results were related to the effects of heat treatment on microstructure changes of alloy.     

Raman mapping of low-content active-ingredient pharmaceutical formulations. part II: statistically optimized sampling for detection of less than 1% of an active pharmaceutical ingredient

Several tablets are prepared with two forms of an active pharmaceutical ingredient (API) of which one (less than 1% w/w) is considered undesirable. The presence of this component is tested for by Raman microscopy in a series of mapping experiments. These experiments are conducted with a statistically based sampling routine in which the number of spectra to collect across the whole surface of a tablet is set so as to theoretically ensure spectral detection of the low-concentration form. Such experiments are then repeated a number of times to achieve approximately 95% confidence that the strictly limited number of sampling points suffice to detect the low-concentration form and that Raman microscopy is technically a reliable method for analytical analysis of this type.     

Chemical composition of currant seed extracts and their protective effect on human lymphocytes DNA

On the basis of LC/UV/MS analysis, 35 compounds from the extracts of seeds of black, red, and white currants (2 cultivars of each) were identified. Black currants cultivars contained protocatechuic acid and p-hydroxybenzoic acid, and traces of nitril containing phenolic acids. The presence of synapoyl glucoside was characteristic for cv. Malling Jewel. Sesquiterpenoid glycosides and carboxymethylindol glycosides were present mainly in white and red currant cultivars. Blackcurrant seeds contained higher amounts of flavonoids, especially rutin, isoquercetin, and taxifolin. The currant seed extracts were tested for in vitro protective effect on chromosome aberrations in peripheral human lymphocytes using cytochalasin-B blocked micronucleus (CBMN) assay. The frequency of MN was scored in binucleated cells, and the cultivars of black currants showed the best antioxidant potential. At a concentration of only 0.17 mg/mL, extract of the seed cv. Malling Jewel effected a decrease in the frequency of MN of 60% compared with control cell cultures. PRACTICAL APPLICATION: Our results provide evidence of protective effects of currant seed extracts and isolated pure compounds on cytogenetic damages in human lymphocytes. Thus, currant seed extracts could exert beneficial effects in quite a few diseases, for many of the biological actions have been attributed to their antioxidant properties.