ZrO2 fibers obtained from the halide free synthesis of non-beaded PVA/Zr n-propoxide electrospun fibrous composites

The composite fibers of polyvinyl alcohol (PVA) and zirconium (Zr) n-propoxide were produced by an electrospinning process using the mixed solution of PVA and sol of zirconium n-propoxide. Effects of process parameters, viz. applied voltage, needle to collector distance and flow rate, were studied on the composite fibrous morphology. Bead-free composite fibers, with fiber diameter ranging from 155 nm to 850 nm, were produced with different process parameters. The morphology of the fibers varies significantly with the heat treatment. Heat treatment of the composite fibrous mats results in the removal of PVA, which causes the surface rough while retaining the fibrous morphology. The XRD studies reveal that the structure of PVA free ZrO₂ fibers is tetragonal.     

Gastric H+, K+-ATPase Inhibition,and Antioxidant Properties of Selected Commonly Consumed Vegetable Sources

Oxidative stress and upregulation of gastric H⁺, K⁺-ATPase enzyme activity have been known to cause ulcer pathogenicity for which safer drugs are yet to be identified. Aqueous extracts of seven commonly consumed vegetable sources were screened for inhibition of H⁺, K⁺-ATPase and antioxidant activities. Results indicated that Z. officinale (Ginger) followed by M. arvensis (Pudina) are potent gastroprotective sources with inhibition of H⁺, K⁺-ATPase of IC₅₀ of 18.3 ± 0.7 and 25.2 ± 0.9 μg gallic acid equivalents/ml respectively, which is almost equivalent or better than the known inhibition of H⁺, K⁺-ATPase—Omeprazole (IC₅₀ ?27 μg/ml). Further, all these vegetable extracts showed multi-potent antioxidant activity, such as free radical scavenging, reducing power ability, and inhibition of lipid peroxidation, which are required to inhibit complex steps of ulcerations. On the basis of the absolute amounts and potency of inhibition of H⁺, K⁺-ATPase as well as antioxidant activity of individual phenolic acids, the relative percentage contribution of phenolic acids from different vegetable extracts to both inhibition of H⁺, K⁺-ATPase and antioxidant activity was calculated and data revealed that gentisic and protocatechuic acid contributes significantly to both inhibition of H⁺, K⁺-ATPase and antioxidant activity.     

Acrylic copolymers crosslinked by click chemistry: Some aspects of synthesis,curing, and crosslinking

Acrylic polymers bearing pendant azide and propargyl groups were synthesized by chemical transformation of epoxy‐ and carboxylic functional acrylic precursor polymers and were characterized. These copolymers were crosslinked by reacting them in the presence of Cu(I) catalyst via the azide–alkyne click reaction leading to triazole networks. Influence of catalyst concentration on the crosslinking cure kinetics was investigated, and the activation parameters were evaluated. The activation energy decreased from 90 kJ mol^?1 to 25 kJ mol^?1 on catalyzing the cure reaction as estimated by Ozawa method. Differential scanning calorimetric analysis indicated thermal decomposition of the residual azide groups at around 200–220°C, which was catalyzed by Cu(I) with associated activation energy of 130–94 kJ mol^?1. Isothermal cure reaction and decomposition of the azide groups were predicted using these parameters. Estimation of crosslink density by solvent swelling and dynamic mechanical analyses showed a normal crosslinking behavior. While the solvent swelling rate and the equilibrium swelling decreased, the front factor and diffusion coefficient of swelling showed a transition from non‐Fickian to Fickian as the triazole concentration increased in the network. The click reaction offered an alternate means to crosslink acrylate polymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1289‐1300, 2013     

Contact inhibition of locomotion probabilities drive solitary versus collective cell migration

Contact inhibition of locomotion (CIL) is the process whereby cells collide, cease migrating in the direction of the collision, and repolarize their migration machinery away from the collision. Quantitative analysis of CIL has remained elusive because cell-to-cell collisions are infrequent in traditional cell culture. Moreover, whereas CIL predicts mutual cell repulsion and ‘scattering’ of cells, the same cells in vivo are observed to undergo CIL at some developmental times and collective cell migration at others. It remains unclear whether CIL is simply absent during collective cell migration, or if the two processes coexist and are perhaps even related. Here, we used micropatterned stripes of extracellular matrix to restrict cell migration to linear paths such that cells polarized in one of two directions and collisions between cells occurred frequently and consistently, permitting quantitative and unbiased analysis of CIL. Observing repolarization events in different contexts, including head-to-head collision, head-to-tail collision, collision with an inert barrier, or no collision, and describing polarization as a two-state transition indicated that CIL occurs probabilistically, and most strongly upon head-to-head collisions. In addition to strong CIL, we also observed ‘trains’ of cells moving collectively with high persistence that appeared to emerge from single cells. To reconcile these seemingly conflicting observations of CIL and collective cell migration, we constructed an agent-based model to simulate our experiments. Our model quantitatively predicted the emergence of collective migration, and demonstrated the sensitivity of such emergence to the probability of CIL. Thus CIL and collective migration can coexist, and in fact a shift in CIL probabilities may underlie transitions between solitary cell migration and collective cell migration. Taken together, our data demonstrate the emergence of persistently polarized, collective cell movement arising from CIL between colliding cells.     

Conversion of pencil graphite to graphene/polypyrrole nanofiber composite electrodes and its doping effect on the supercapacitive properties

Graphene platelets were synthesized from pencil flake graphite and commercial graphite by chemical method. The chemical method involved modified Hummer's method to synthesize graphene oxide (GO) and the use of hydrazine monohydrate to reduce GO to reduced graphene oxide (rGO). rGO were further reduced using rapid microwave treatment in presence of little amount of hydrazine monohydrate to graphene platelets. Chemically modified graphene/polypyrrole (PPy) nanofiber composites were prepared by in situ anodic electropolymerization of pyrrole monomer in the presence of graphene on stainless steel substrate. The morphology, composition, and electronic structure of the composites together with PPy fibers, graphene oxide (GO), rGO, and graphene were characterized using X‐ray diffraction (XRD), laser‐Raman, and scanning electron microscopic (SEM) methods. From SEM, it was observed that chemically modified graphene formed as a uniform nanocomposite with the PPy fibers absorbed on the graphene surface and/or filled between the graphene sheets. Such uniform structure together with the observed high conductivities afforded high specific capacitance and good cycling stability during the charge–discharge process when used as supercapacitor electrodes. A specific capacitance of supercapacitor was as high as 304 F g^?1 at a current density of 2 mA cm^?1 was achieved over a PPy‐doped graphene composite. POLYM. ENG. SCI., 55:2118–2126, 2015. © 2014 Society of Plastics Engineers     

Compressive property of liquid silicon (infiltrated) boron carbide

Compressive deformation of reaction bonded boron carbide has been carried out over a strain rate range 10⁻⁴ to 10⁻² s⁻¹. The maximum compressive strength of reaction bonded boron carbide at strain rate of 10⁻⁴ s⁻¹ is 370 MPa and 470 MPa at strain rate of 10⁻² s⁻¹. It is not possible to carryout quasi-static compression test at very higher strain rates (≥ 10² s⁻¹). However, the data generated at low strain rates can be extrapolated to higher strain rates and this data correlate well with the experimental compressive strength values generated by dynamic compression tests.     

Materials in harnessing solar power

Harnessing renewable solar energy through different technologies is greatly dependent on the advancement of solar grade materials’ science and engineering. In this article, the prominent solar energy technologies, namely solar photovoltaic and concentrated solar power and other relevant technologies, and aspects related to various solar grade materials, influence of nanomaterials on enhancement of solar energy harvest, technology–market relations, development of hybrid systems etc., are discussed. The inspiration to write this article is not only to review the existing technologies to harvest solar energy but also to highlight the pertinent and possible solutions thereof, especially from materials perspective.     

Closed-loop object recognition using reinforcement learning

Current computer vision systems whose basic methodology is open-loop or filter type typically use image segmentation followed by object recognition algorithms. These systems are not robust for most real-world applications. In contrast, the system presented here achieves robust performance by using reinforcement learning to induce a mapping from input images to corresponding segmentation parameters. This is accomplished by using the confidence level of model matching as a reinforcement signal for a team of learning automata to search for segmentation parameters during training. The use of the recognition algorithm as part of the evaluation function for image segmentation gives rise to significant improvement of the system performance by automatic generation of recognition strategies. The system is verified through experiments on sequences of indoor and outdoor color images with varying external conditions