Surface diffusion in microporous media

The surface diffusion of He, Ne, H₂, Ar, O₂, N₂ and CO₂ through Vycor microporous glass was analyzed theoretically and experimentally in the low pressure range as a function of temperature. A statistical-mechanical treatment was carried out in terms of partition functions to derive a general equation of surface flow. It was possible to separate the surface diffusion from the total flow using a simplified working equation. The conventional method which assumes that there is no adsorbed flow for helium should be discarded, because the fraction of surface diffusion for helium ranges from 0.133 to 0.247. It is also illustrated how to predict the permeability of a new gas for the same porous medium.     

An EGF-pseudomonas exotoxin A recombinant protein with a deletion in toxin binding domain specifically kills EGF receptor bearing cells

We constructed two chimeric toxins; one composed of epidermalgrowth factor (EGF) and pseudomonas exotoxin A (PE), designatedEGF-PE and the other composed of EGF and PE with a deletionof the Ia domain (cell-binding domain), designated EGF-PE (Ia).Both chimeric toxins reacted with anti-EGF and anti-PE antibodies.The cell-killing experiments showed that EGF-PE, but not EGF-PE(Ia),was cytotoxic to the murine fibroblast cell line NR6, whichcarried the PE receptor, but not the EGF receptor. However,after NR6 was transfected with DNA for the expression of humanEGF receptor, the transfected cell line, designated NRHER5,overexpressed human EGF receptors and became sensitive to EGF-PE(IA).The cytotoxicity of EGF-PE(Ia), but not EGF-PE, to NRHER5 canbe completely blocked by an excess amount of EGF. To completelyreverse the cytotoxicity of EGF-PE on NRHER5, both the EGF receptorpathway and the PE receptor pathway need to be blocked. Theseresults suggest that EGF-PE exhibits both EGF and PE bindingactivities, while EGF-PE(IA) possesses only EGF binding activity.Thus, EGF-PE(Ia) may be a better chimeric toxin than EGF-PEin terms of target specificity to EGF receptor bearing cells.We, therefore, examined the cytotoxicity of EGF-PE(Ia) to varioushuman cancer cell lines. We find that human cancer cells containingmore EGF receptors are more sensitive to EGF-PE(Ia).     

Companion robots for older adults: Rodgers’ evolutionary concept analysis approach

Intelligent Service Robotics - This study aims to analyze the concept of companion robots for older adults from the perspective of nursing. This study employed a concept analysis. The literature...     

Sensing tool breakage in face milling with a neural network

A new approach using a neural network to process the features of the cutting force signal for the recognition of tool breakage in face milling is proposed. The cutting force signal is first compressed by averaging the cutting force signal per tooth. Then, the average cutting force signal is passed through a median filter to extract the features of the cutting force signal due to tool breakage. With the back propagation training process, the neural network memorizes the feature difference of the cutting force signal between with and without tool breakage. As a result, the neural network can be used to classify the cutting force signal with or without tool breakage. Experiments show this new approach can sense tool breakage in a wide range of face milling operations.     

Nitrogen removal using recycled polystyrene bottles as biofilm media

The performance of an attached growth wastewater treatment process was investigated in an effort to improve nitrogen removal efficiency. Recycled Yakult (lactic acid fermentation drink) bottles made of polystyrene were used as a biofilm media. The use of Yakult bottles as a biofilm media has been attempted by numerous researchers in Japan for the removal of solids and organics. However, these studies focused only on the removal of solids and organics. This study extended their application to the removal of nitrogen for domestic sewage treatment. Yakult media was placed in a reactor with 70% apparent reactor volume in a conventional A/O process. The bottom of the Yakult media was removed, and randomly filled Yakult media were effectively able to reduce the flow in tanks, resulting in an increase in the contact time between pollutants and microorganisms. With higher HRT, the nitrogen removal efficiency was increased by up to 83% with 12 hr of HRT. Nitrification appeared to be the limiting factor of nitrogen removal at an HRT that is less than 12 hr, indicating that the Yakult process requires more retention time to achieve nitrification compared to other biofilm processes. The removal efficiencies of organics and solids were high regardless of the change of operational parameters. This article is based on a presentation in “The 7th Korea-China Workshop On Advanced Materials” organized by the Korea-China Advanced Materials Cooperation Center and the China-Korea Advanced Materials Cooperation Center, held at Ramada Plaza Jeju Hotel, Jeju Island, Korea on August 24–27, 2003.     

Galvanic coupling effect on corrosion behavior of Al alloy-matrix composites

Galvanic coupling effect on the corrosion of SiC-reinforced aluminum alloy-matrix composites was investigated in a sodium chloride solution. The potentiodynamic polarization measurement indicated that pitting potentials of metal matrix composites (MMCs) and AA2124 matrix alloy were similar, and pitting potential of MMCs was almost same as corrosion potential, while pitting susceptibility of MMCs was higher than that of AA2124 alloy. Galvanic current by formation of galvanic couple between SiCw and matrix reveals very low value because of large cathodic polarization of SiC. However, by increasing potential of matrix to pitting potential by this galvanic couple and thus, forming pits easily at the weak passive film near SiC reinforcing phase preferentially, it is concluded that pitting susceptibility of MMCs increases highly than AA2124 alloy of matrix composition.     

A timing controller embedded driver IC with 3.24‐Gbps eDP interface for chip‐on‐glass TFT‐LCD applications

This paper presents a timing controller embedded driver (TED) IC with 3.24‐Gbps embedded display port (eDP), which is implemented using a 45‐nm high‐voltage CMOS process for the chip‐on‐glass (COG) TFT‐LCD applications. The proposed TED‐IC employs the input offset calibration scheme, the zero‐adjustable equalizer, and the phase locked loop‐based bang‐bang clock and data recovery to enhance the maximum data rate. Also, the proposed TED‐IC provides efficient power management by supporting advanced link power management feature of eDP standard v1.4. Additionally, the smart charge sharing is proposed to reduce the dynamic power consumption of output buffers. Measured result demonstrates the maximum data rate of 3.24 Gbps from a 1.1 V supply voltage with a 7.9‐inch QXGA 60‐Hz COG‐LCD prototype panel and 44% power saving from the display system.     

Video-based weathering gallery

We present a simple and effective method for constructing a gallery that consists of weathering effect elements called time-dependent appearance manifolds (TDAMs). Since TDAMs are computed from sample video clips showing dynamic weathering phenomena, they represent very smooth changes in the appearance of weathered pixels over time. Once a gallery with a variety of weathering effects is prepared, users can interactively choose and apply the predefined effects onto the surface of 3D graphic models and then finally assign the most appropriate one. This video-based weathering method can be implemented with very simple algorithms and it supports predictable, intuitive, and natural effects. Our system allows users to produce photorealistic augmented videos that include 3D graphic models weathered by our method. Moreover, users can easily enhance the realism of the augmented videos by manipulating rendering parameters such as the degree of weathering, texturing, lighting, and shadowing through user-friendly graphical user interfaces (GUIs).     

A secure image encryption scheme based on chaotic maps and affine transformation

Due to the interesting nonlinear dynamic properties of chaotic maps, recently chaos-based encryption algorithms have gained much attention in cryptographic communities. However, many encryption schemes do not fulfil the minimum key space requirement, which is an essential concern in many secure data applications. In this paper, an efficient chaos-based image encryption scheme with higher key space is presented. Even with a single round of encryption, a significantly larger key space can be achieved. The proposed scheme removes correlation among image pixels via random chaotic sequences, simply by XOR and addition operations. In order to resist against numerous attacks, we apply the affine transformation to get the final ciphertext image. The security of the proposed scheme is proved through histogram, contrast, PSNR, entropy, correlation, key space, key sensitivity and differential attack analysis. Many significant properties of chaotic maps, sensitivity to initial condition and control parameters, structure and attack complexity, make the anticipated scheme very reliable, practical and robust in various secure communication applications.     

A novel part-based approach to mean-shift algorithm for visual tracking

Visual tracking is one of the most important problems considered in computer vision. To improve the performance of the visual tracking, a part-based approach will be a good solution. In this paper, a novel method of visual tracking algorithm named part-based mean-shift (PBMS) algorithm is presented. In the proposed PBMS, unlike the standard mean-shift (MS), the target object is divided into multiple parts and the target is tracked by tracking each individual part and combining the results. For the part-based visual tracking, the objective function in the MS is modified such that the target object is represented as a combination of the parts and iterative optimization solution is presented. Further, the proposed PBMS provides a systematic and analytic way to determine the scale of the bounding box for the target from the perspective of the objective function optimization. Simulation is conducted with several benchmark problems and the result shows that the proposed PBMS outperforms the standard MS.