Synthesis,Characterization and <Emphasis Type="Italic">in-vitro</Emphasis> Study of Chitosan/Gelatin/Calcium Phosphate Hybrid Scaffolds Fabricated Via Ion Diffusion Mechanism for Bone Tissue Engineering

In this study, biomimetic scaffolds were designed to investigate calcium phosphate formation via a double diffusion mechanism within a gelatin/chitosan hydrogel in biological pH and temperature. Three types of samples with initial percentages of chitosan (20, 30 and 40 wt. %) were prepared. Diffusion of calcium and phosphate ions through the hydrogel formed a precipitation layer. Samples were freeze dried to form porous scaffolds and soaked in glutaraldehyde to increase their mechanical properties. X-ray diffraction (XRD), Fourier transform infra-red (FTIR) spectroscopy and scanning electron microscopy (SEM) were employed to investigate the microstructure and to characterize the prepared scaffolds. Analysis of precipitation indicated the presence of brushite and hydroxyapatite. The amorphous calcium phosphate phase converted into crystalline hydroxyapatite after immersion in simulated body fluid which mimics the formation of hydroxyapatite in the human body. FTIR results suggested the presence of structural hydroxyl and phosphate bonds in the structure of the prepared scaffolds which could be due to the formation of hydroxyapatite. With increasing amount of chitosan in the composite scaffold, the water up-take ability was increased from 380 to 660 %, yield strength and Young’s modulus slightly decreased and the crystalinity of the precipitated phase increased. Mechanical properties obtained from the samples were in the range of cancellous bone. MTT assay results and alkaline phosphatase activity showed prepared scaffolds had proper biocompatibility.     

Response surface optimization of conditions for debittering of white mahlab (<Emphasis Type="Italic">Prunus mahaleb</Emphasis> L.) juice using polystyrene resins

In the current study, debittering of white mahlab (Prunus mahaleb L.) juice using polystyrene resins was investigated and optimized using the Box–Behnken response surface methodology. The effects of independent variables including resin type (cation exchange resin, anion exchange resin, and 50:50 cation/anion exchange resin), resin dosage (0.05, 0.075, and 0.1 g/mL) and agitation speed (50, 150, and 250 rpm) on total phenolic content, total flavonoid content, total anthocyanin content (TAC), antioxidant activity, and bitterness of white mahlab juice were studied. Effects of resin type and dosage were found to be significant (p < 0.05) for all responses. A dosage of 0.05 g/mL of the anion exchange resin and an agitation speed of 250 rpm were selected as the optimum conditions based on minimum bitterness (2.42) and maximum TAC (0.018 g/mol). We could conclude that the anionic resin can greatly reduce the intensity of bitterness and maintain the composition and characteristics of the P. mahaleb juice.     

Photocatalytic performance of oxygen vacancy rich-TiO2 combined with Bi4O5Br2 nanoparticles on degradation of several water pollutants

Despite significant advancements in the improvement of heterogeneous photocatalysis towards water treatment, these processes still have some bottlenecks. In this research paper, oxygen vacancy rich-TiO₂ was combined with Bi₄O₅Br₂ nanoparticles (denoted as TiO₂-OVs/Bi₄O₅Br₂) by eco-friendly hydrothermal approach. The outcomes demonstrated that the photoactivity strongly depends on plenteous active sites, reinforced charge segregation, as well as striking visible-light absorption ability in TiO₂-OVs/Bi₄O₅Br₂ nanocomposite with n-n heterojunction. The photoactivity was found to follow the trend: TiO₂-OVs/Bi₄O₅Br₂ (30%) > TiO₂-OVs > TiO₂. Briefly, the removal efficiencies of RhB, MB, and fuchsine were 100%, 96.2%, and 84.7% using TiO₂-OVs/Bi₄O₅Br₂ (30%) in 120 min, while they were 25.1%, 20.0%, and 15.3% over the TiO₂, respectively. Further, the boosted rate constant was observed for the photoreduction of Cr (VI) on the TiO₂-OVs/Bi₄O₅Br₂ (30%) nanocomposite, which was 19.4 and 7.8-folds more than the TiO₂ and TiO₂-OVs photocatalysts, respectively. The radical scavenging tests with different quenchers demonstrated that holes and superoxide anion radicals take part in the degradation reaction. Finally, by investigating the electrochemical properties, a mechanism was offered to describe the improved e^–/h⁺ pairs separation and migration. This research displayed that the design of n-n heterojunction using TiO₂-OVs could be suitable for severely improving photocatalytic performance of TiO₂ under visible light.     

Synthesis route and three different core-shell impacts on magnetic characterization of gadolinium oxide-based nanoparticles as new contrast agents for molecular magnetic resonance imaging

Despite its good resolution, magnetic resonance imaging intrinsically has low sensitivity. Recently, contrast agent nanoparticles have been used as sensitivity and contrast enhancer. The aim of this study was to investigate a new controlled synthesis method for gadolinium oxide-based nanoparticle preparation. For this purpose, diethyleneglycol coating of gadolinium oxide (Gd₂O₃-DEG) was performed using new supervised polyol route, and small particulate gadolinium oxide (SPGO) PEGylation was obtained with methoxy-polyethylene-glycol-silane (550 and 2,000 Da) coatings as SPGO-mPEG-silane550 and 2,000, respectively. Physicochemical characterization and magnetic properties of these three contrast agents in comparison with conventional Gd-DTPA were verified by dynamic light scattering transmission electron microscopy, Fourier transform infrared spectroscopy, inductively coupled plasma, X-ray diffraction, vibrating sample magnetometer, and the signal intensity and relaxivity measurements were performed using 1.5-T MRI scanner.As a result, the nanoparticle sizes of Gd₂O₃-DEG, SPGO-mPEG-silane550, and SPGO-mPEG-silane2000 could be reached to 5.9, 51.3, 194.2 nm, respectively. The image signal intensity and longitudinal (r₁) and transverse relaxivity (r₂) measurements in different concentrations (0.3 to approximately 2.5 mM), revealed the r₂/r₁ ratios of 1.13, 0.89, 33.34, and 33.72 for Gd-DTPA, Gd₂O₃-DEG, SPGO-mPEG-silane550, and SPGO-mPEG-silane2000, respectively.The achievement of new synthesis route of Gd₂O₃-DEG resulted in lower r₂/r₁ ratio for Gd₂O₃-DEG than Gd-DTPA and other previous synthesized methods by this and other groups. The smaller r₂/r₁ ratios of two PEGylated-SPGO contrast agents in our study in comparison with r₂/r₁ ratio of previous PEGylation (r₂/r₁ = 81.9 for mPEG-silane 6,000 MW) showed that these new three introduced contrast agents could potentially be proper contrast enhancers for cellular and molecular MR imaging.     

Application of a H‐Point Standard Addition Method for Simultaneous Spectrophotometric Determination of Chlorate and Bromate Impurities in Military Grade Ammonium Perchlorate

A H‐point standard addition method (HPSAM) was applied to simultaneously determinate chlorate and bromate in ammonium perchlorate. The method is based on the difference between their reaction rates with chloride in acidic media whereby methyl orange is used as spectrophotometric indicator. The reaction can be monitored spectrophotometrically by measuring the decrease in the absorbance of methyl orange at 507 nm in the time range 50–250 s after initiation of the reaction with 1 s intervals. The results showed that chlorate and bromate can be determined simultaneously in the range 50–1000 and 50–2000 ng mL⁻¹, respectively. The proposed method was applied to determinate chlorate and bromate impurities in military grade ammonium perchlorate. In addition, excellent agreement between this proposed method and standard methods was observed.     

Selective Degradation of Lignin Polymer by Chlorine Dioxide During Chemical Pulp Delignification in Flow Through Reactor

The delignification of pulp in a conventional batch reactor provides convenient conditions for inutile secondary reactions in which ClO₂ reacts with oxidized aromatic units of lignin. In this study the flow-through reactor was applied to minimize secondary reactions. The obtained results showed that the removal of oxidized lignin from the reaction zone significantly enhanced the ClO₂ reaction toward non-oxidized units of lignin. Application of an organic solvent-water solution, bleaching liquor, significantly increased the removal of oxidized lignin and decreased considerably the secondary reactions. Although this technique considerably improved ClO₂ effective efficiency, large amounts of chlorate formation decreased the overall effect of improved ClO₂ global efficiency.     

A study on the extraction of essential oil of Persian black cumin using static supercritical CO2 extraction,and comparison with hydro-distillation extraction method

The essential oil of Persian black cumin was extracted using static supercritical CO₂ technique at different temperatures, extraction times, and number of extractions. The composition of extracted oil was measured by GC-MS analysis and 25 components were identified. It was found that the oil recovery was reduced by increasing the temperature. Maximum recovery was achieved at two-step extraction that was about 49%. Both dissolution rate and solubility limited the oil recovery at the tested extraction conditions. The oxygenate components have less dissolution rate than the terpenes. The application of experimental data for design of an efficient dynamic extraction system was discussed.     

Quantitative Assessment of Point-of-Care 3D-Printed Patient-Specific Polyetheretherketone (PEEK) Cranial Implants

Recent advancements in medical imaging, virtual surgical planning (VSP), and three-dimensional (3D) printing have potentially changed how today’s craniomaxillofacial surgeons use patient information for customized treatments. Over the years, polyetheretherketone (PEEK) has emerged as the biomaterial of choice to reconstruct craniofacial defects. With advancements in additive manufacturing (AM) systems, prospects for the point-of-care (POC) 3D printing of PEEK patient-specific implants (PSIs) have emerged. Consequently, investigating the clinical reliability of POC-manufactured PEEK implants has become a necessary endeavor. Therefore, this paper aims to provide a quantitative assessment of POC-manufactured, 3D-printed PEEK PSIs for cranial reconstruction through characterization of the geometrical, morphological, and biomechanical aspects of the in-hospital 3D-printed PEEK cranial implants. The study results revealed that the printed customized cranial implants had high dimensional accuracy and repeatability, displaying clinically acceptable morphologic similarity concerning fit and contours continuity. From a biomechanical standpoint, it was noticed that the tested implants had variable peak load values with discrete fracture patterns and failed at a mean (SD) peak load of 798.38 ± 211.45 N. In conclusion, the results of this preclinical study are in line with cranial implant expectations; however, specific attributes have scope for further improvements.     

A multiplier-less digital design of a bio-inspired stimulator to suppress synchronized regime in a large-scale,sparsely connected neural network

Excessive synchronous firing of neurons is the sign of several neurological disorders such as Parkinson and epilepsy. In addition, growing evidence suggests that astrocytes have significant roles in neural synchronization. Drawing on these concepts and based on the latest studies, a bio-inspired stimulator which essentially is a dynamical model of the astrocyte biophysical model is proposed. The performance of the proposed bio-inspired stimulator is investigated on a large-scale, sparsely connected neural network which models a local cortical population. Next, a multiplier-less digital circuit for the bio-inspired stimulator is designed, and finally, the complete digital circuit of the closed-loop system is implemented in hardware on the ZedBoard development kit. Considering software simulations and hardware FPGA implementation, the proposed bio-inspired stimulator is able to prevent the hyper-synchronous neural firing in a network of excitatory and inhibitory neurons. Based on the obtained results, it is demonstrated that the proposed stimulator has a demand-controlled characteristic and can be a good candidate as a new deep brain stimulation (DBS) technique to effectively suppress the hyper-synchronous neural oscillations.

     

Signal amplification strategy using gold/N ‐trimethyl chitosan/iron oxide magnetic composite nanoparticles as a tracer tag for high‐sensitive electrochemical detection

This study presents a novel signal amplification method for high‐sensitive electrochemical immunosensing. Gold (Au)/N ‐trimethyl chitosan (TMC)/iron oxide (Fe₃ O₄) (shell/shell/core) nanocomposite was used as a tracing tag to label antibody. The tag was shown to be capable of amplifying the recognition signal by high‐density assembly of Au nanoparticles (NPs) on TMC/Fe₃ O₄ particles. The remarkable conductivity of AuNPs provides a feasible pathway for electron transfer. The method was found to be simple, reliable and capable of high‐sensitive detection of human serum albumin as a model, down to 0.2 pg/ml in the range of 0.25–1000 pg/ml. Findings of the present study would create new opportunities for sensitive and rapid detection of various analytes.Inspec keywords: gold, filled polymers, conducting polymers, iron compounds, magnetic particles, nanoparticles, nanocomposites, nanosensors, electrochemical sensors, proteins, molecular biophysics, biomagnetism, biosensorsOther keywords: signal amplification strategy, gold‐N‐trimethyl chitosan‐iron oxide magnetic composite nanoparticles, tracer tag, high‐sensitive electrochemical detection, high‐sensitive electrochemical immunosensing, antibody, high‐density assembly, AuNP conductivity, electron transfer, human serum albumin, FeO‐Au