Effect of operating conditions in removal of arsenic from water by nanofiltration membrane

The removal of arsenic from synthetic waters and surface water by nanofiltration (NF) membrane was investigated. In synthetic solutions, arsenic rejection experiments included variation of arsenic retentate concentration, transmembrane pressure, crossflow velocity and temperature. Arsenic rejection increased with arsenic retentate concentration. Arsenic was removed 93-99% from synthetic feed waters containing between 100 and 382 μg/L as V, resulting in permeate arsenic concentrations of about 5 μg/L. Under studied conditions, arsenic rejection was independent of transmembrane pressure, crossflow velocity and temperature. In surface water, the mean rejection of As V was 95% while the rejection of sulfate was 97%. The co-occurrence of dissolved inorganics does not significantly influence arsenic rejection. The mean concentration of As in collected permeated was 8 μg/L. The mean rejection of TDS, total hardness and conductivity were 75, 88 and 75% respectively.     

Analysis of bacterial community during the fermentation of pulque, a traditional Mexican alcoholic beverage, using a polyphasic approach

In this study, the characterization of the bacterial community present during the fermentation of pulque, a traditional Mexican alcoholic beverage from maguey (Agave), was determined for the first time by a polyphasic approach in which both culture and non-culture dependent methods were utilized. The work included the isolation of lactic acid bacteria (LAB), aerobic mesophiles, and 16S rDNA clone libraries from total DNA extracted from the maguey sap (aguamiel) used as substrate, after inoculation with a sample of previously produced pulque and followed by 6-h fermentation. Microbiological diversity results were correlated with fermentation process parameters such as sucrose, glucose, fructose and fermentation product concentrations. In addition, medium rheological behavior analysis and scanning electron microscopy in aguamiel and during pulque fermentation were also performed. Our results showed that both culture and non-culture dependent approaches allowed the detection of several new and previously reported species within the alpha-, gamma-Proteobacteria and Firmicutes. Bacteria diversity in aguamiel was composed by the heterofermentative Leuconostoc citreum, L. mesenteroides, L. kimchi, the gamma-Proteobacteria Erwinia rhapontici, Enterobacter spp. and Acinetobacter radioresistens. Inoculation with previously fermented pulque incorporated to the system microbiota, homofermentative lactobacilli related to Lactobacillus acidophilus, several alpha-Proteobacteria such as Zymomonas mobilis and Acetobacter malorum, other gamma-Proteobacteria and an important amount of yeasts, creating a starting metabolic diversity composed by homofermentative and heterofermentative LAB, acetic and ethanol producing microorganisms. At the end of the fermentation process, the bacterial diversity was mainly composed by the homofermentative Lactobacillus acidophilus, the heterofermentative L. mesenteroides, Lactococcus lactis subsp. lactis and the alpha-Proteobacteria A. malorum. After a 6-h fermentation, 83.27% of total sugars detected after inoculation were consumed (228.4 mM hexose equivalents) and a carbon (C) recovery of 66.18% in fermentation products was estimated. They were produced 284.4 mM C as ethanol, 71.5 mM C as acetic acid and 19 mM C as lactic acid, demonstrating the presence of homo- and heterofermentative, acetic and alcoholic metabolisms in the final product. It was also found, after hydrolysis, that the exopolysaccharide produced during the fermentation was mainly composed by fructose residues, probably inulin or levan.     

As, Hg, and Se flue gas sampling in a coal-fired power plant and their fate during coal combustion

As, Hg, and Se are the most volatile elements in the flue gas from a coal-fired power plant. Significant amounts of these elements cause an undesired direct gaseous emission, which leads to a serious environmental health risk. The main focus of this study is to evaluate the possibility of simultaneous sampling of these volatile elements using an accurate official method for Hg (the most volatile element). A study of As, Hg, and Se emissions from a 1400 MW coal-fired power plant equipped with electrostatic precipitators (ESPs) was carried out for the combustion of a mixture of two types of coal. Simultaneous sampling of coal, bottom ash, fly ash, flue gas, and particles associated with the gas phase has been performed. Flue gas has been sampled by the Ontario Hydro Method Sampling Train, an ASTM method for Hg speciation. This sampling method was tested for As and Se sampling. As and Se determinations have been performed by HG-AAS, and Hg has been determined by CV-AAS. The results were used to examine the following: overall mass balances, relative distribution of these elements in the coal-fired power plant; As, Hg, and Se concentrations in coal and combustion residues; and predominant oxidation state for Hg in flue gas. The mass balances obtained for As, Hg, and Se were satisfactory in all cases; nevertheless, relative enrichment values in fly ash for As and Se were low; therefore, we concluded that As sampling in flue gas can be conducted by application of the Ontario Hydro Method; nevertheless Se released in the gas phase is not completely collected by this sampling train. Application of this sampling method allowed for performance of Hg speciation. The results indicated that Hg(II) was the predominant species in flue gas. It has also been proved that 24%, more than 99.8%, and 90% for As, Hg, and Se in the stack emissions, respectively, were in the gaseous phase.     

Mid-infrared GaSb-based EP-VCSELl emitting at 2.63 μm

Electrically-pumped GaSb-based vertical-cavity surface-emitting lasers emitting up to 2.63 μm at room temperature are reported. The whole structure was grown monolithically in one run by solid-source molecular beam epitaxy. This heterostructure is composed of two n-doped AlAsSb/GaSb DBRs, a type-I GaInAsSb/AlGaAsSb multiquantum- well active region and an InAsSb/GaSb tunnel junction. A quasi-CW (1 μs, 5 %) operation was obtained at room temperature for 35 μm-diameter devices with threshold current of 85 mA.     

Copolymerization of aniline and m-chloroaniline. Chlorine addition and structure of the resulting material

The copolymerization of aniline (Ani) and m-chloroaniline (mClA) in variable ratios was performed by chemical oxidation in HCl medium. The resulting copolymer composition was determined by elemental analysis and XPS. The results show the incorporation of additional Cl substituents in the polymer backbone when m-chloroaniline is present in the polymerization medium with a high mClA:Ani ratio. IR and NMR characterization confirms that finding. Conductivity measurements of the copolymers in salt form were also performed. UV–vis spectra for high mClA:Ani ratios show a main band centred ca. 380 nm. PM3-ZINDO/S spectra calculations suggest that the Cl substituents stabilize spinless semiquinone structures in the polymer chain which are responsible for the 380 nm band. Photoluminescence spectra are recorded and analyzed. The addition of chlorine is attributed to the lower reaction rate in high mClA:Ani ratio. Copolymers with high mClA:Ani ratio appear as materials very different from polyaniline, thus these differences should be considered regarding possible applications.     

The polymerization of acenaphthylene by sulphuric acid in methylenedichloride

Summary Acenaphthylene was polymerized in methylenedichloride at 273, 291 and 308 K by sulphuric acid. The initiation step takes place by addition of the proton of sulphuric acid to the monomer. The propagation step is through ion-pairs, and the propagation constants are first-order with respect to the monomer and initiator(k_p = 0.22 M^–1. s^–1(273K), k_p=0.88 M^–1. s^–1(291K), k_p = 2.81 M^–1. s^–1 (308K)). There is not appreciable loss of active centres, being this confirmed by experiments carried out with succesive additions of monomer. The molecular weights obtained confirm the importance of processes to monomer in this polymerization.     

The role of 3' UTRs in the mechanisms for segregating mitochondrial proteins

The mitochondrial proteome, meant as the collection of proteins localized in the mitochondrion, whose fundamental function is the energy production for the life of the cell, is estimated to be constituted by at least 1000 proteins. Since the mitochondrial genome codes only for 13 polypeptides, in practice all of them are coded by nuclear genes and are imported in the mitochondrion by means of a sophisticated mechanism of sorting that is not completely known. Most classified mitochondrial proteins are synthesized as precursors with an amino-terminal extension (leader peptide), provided with peculiar physical and structural characteristics that are responsible for the recognition and import system. However, there is experimental evidence that complementary or alternative import systems exist. In particular, the 3' UnTranslated Regions (UTRs) of the mRNAs may be involved, through their secondary structure, in the mechanisms of recognition and localization. In this paper, the information content of different human mRNA sequences has been analyzed, and the results show that a significative short-term correlation exists in the 3' UTR sequences of the mRNA's coding for the proteins provided with leader peptides, probably representing the structural constraints that are necessary to the sorting machinery.     

Surfactant to dye binding degree-based methodology for the determination of ionic amphiphilic compounds

A new analytical measurement parameter based on the effect of amphiphilic substances on the degree of binding of a surfactant to dye molecules, which induce the formation of surfactant premicellar aggregates, is presented. The theory for dye-surfactant intermolecular interactions in mixed surfactant systems, which assumes a mononuclear model for the formation of dye-induced premicellar aggregates, has been used to derive an expression that provides linear calibrations for the determination of amphiphilic compounds. The dye-surfactant interactions involved have been investigated, and the variables affecting the measurement analytical parameter have been discussed. The analytical applicability of the surfactant-dye binding degree method is demonstrated by quantifying major anionic surfactants at the nanograms-per-milliliter level and determining the total concentration of these amphiphilic substances in sewage samples (average recoveries ranged from 98 to 102%).     

Model dependency of multivariate autoregressive spectral analysis

A combination of simulations and experimental data analysis has been used to demonstrate that, because cardiovascular control represents a complex linking of input and output parameters, interpreting the variability of individual parameters such as heart rate and arterial pressure virtually requires the use of techniques that quantify control by relating these inputs and outputs. Transfer functions represent appropriate techniques for this purpose. Further, despite the complexities of in vivo physiological control, many of the control elements can be well characterized by only taking into account single inputs and outputs and using a bivariate AR model. However, occasionally when two control systems have a strong and simultaneous influence on a single output parameter, such as arterial pressure and respiratory activity on RR interval, an expansion of the model to the general multivariate case may be required for a complete interpretation. Finally, although not fully demonstrated here, because of the closed-loop nature of cardiovascular control it is likely that algorithms that include causality to account for this characteristic, such as the AR formulation, will most accurately identify the transfer relations     

Assessment of the EEG complexity during activations from sleep

The present study quantitatively analyzes the EEG characteristics during activations (Act) that occur during NREM sleep, and constitute elements of sleep microstructure (i.e. the Cyclic Alternating Pattern). The fractal dimension (FD) and the sample entropy (SampEn) measures were used to study the different sleep stages and the Act that build up the sleep structure. Polysomnographic recordings from 10 good sleepers were analyzed. The complexity indexes of the Act were compared with the non-activation (NAct) periods during non-REM sleep. In addition, complexity measures among the different Act subtypes (A1, A2 and A3) were analyzed. A3 presented a quite similar complexity independently of the sleep stage, while A1 and A2 showed higher complexity in light sleep than during deep sleep. The current results suggest that Act present a hierarchic complexity between subtypes A3 (higher), A2 (intermediate) and A1 (lower) in all sleep stages.