Tetrabutylammonium-induced coacervation in vesicular solutions of alkyl carboxylic acids for the extraction of organic compounds

The potential of the tetrabutylammonium-induced liquid-liquid-phase separation in alkyl carboxylic acid vesicular solutions for the extraction of organic compounds prior to liquid chromatography was examined for the first time. The behavior of the coacervates yielded from octanoic to oleic acids as a function of the pH and salts was investigated. The time required for phase separation depended on the length of the carboxylic acid alkyl chain and the experimental procedure (i.e., standing, sonication, centrifugation, stirring, etc.). Theoretical preconcentration factors were a function of both surfactant concentration and the length of the alkyl chain, and they greatly surpassed those obtained with other surfactant-mediated separations (e.g., surfactant-rich phases from dodecanesulfonic acid or Triton X-114). Parameters affecting the extraction efficiency were assessed. Analytes in a wide polarity/charge range, (e.g., PAHs, surfactants, chlorophenols, bisphenols, phthalates, herbicides, amines, dyes, and photographic developers) were extracted with high efficiencies on the basis of the different types of interactions that the vesicular coacervates can establish (i.e., hydrophobic and ionic interactions, hydrogen bonds, and formation of mixed aggregates). The coacervates were compatible with the chromatographic determination of analytes following UV or MS detection. Their suitability for working under real conditions was checked by applying them to the extraction of nonionic surfactants [alkylphenol ethoxylates (octyl and nonyl) and alcohol ethoxylates (C12-C16)] from raw and treated sewage and to river water samples. Analytes in the coacervate were separated and quantified by liquid chromatography-ion trap mass spectrometry. No cleanup steps were necessary. Recoveries of the target compounds in the environmental water samples ranged from 89 to 103%.     

Improved vapor selectivity and stability of localized surface plasmon resonance with a surfactant-coated Au nanoparticles film

Here, we report the use of tetraoctylammonium bromide (TOABr)-coated Au nanoparticles (NPs) for the optical sensing of volatile organic compounds (VOCs). We find that the film responded selectively to the presence of polar and nonpolar vapors by changes in the maximum wavelength (λ(max)) toward higher and lower wavelengths, respectively, as determined by UV-visible spectroscopy. We also observed that the organic coating reorganizes when vapors partition into the film indicated by FT-IR and the film contracts in the presence of water indicated by scanning electron microscopy (SEM). In the present sensor, the metallic Au core serves as the plasmonic signal while the organic coating acts as the receptor material providing vapor selectivity and sensor stability. Correlating changes in (λ(max)) with changes in the refractive index (RI) and nanoparticle-to-nanoparticle separation in the film is important both fundamentally and for improving selectivity in localized surface plasmon resonance (LSPR) sensors.     

Long-term contract auctions and market power in regulated power industries

A number of countries with oligopolistic power industries have used marginal cost pricing to set the price of energy for small customers. This course of action, however, does not necessarily ensure an efficient outcome when competition is imperfect. The purpose of this paper is to study how the auction of long-term contracts could reduce market power. We do so in a two-firm, two-technology, linear-cost, static model where demand is summarized by a price inelastic load curve. In this context we show that the larger the proportion of total demand auctioned in advance, the lower are both the contract and the average spot price of energy.     

Direct coupling of ionic liquid based single-drop microextraction and GC/MS

The use of ionic liquids as extracting media in single-drop liquid-phase microextraction (SDME) and its direct coupling to gas chromatography/mass spectrometry (GC/MS) is presented. For this purpose, a new removable interface that enables the introduction of the extracted analytes into the GC system, while preventing the ionic liquid from entering the column, has been developed. The determination of three representative pollutants in water samples has been used as a model analytical problem in order to demonstrate the feasibility of the proposed interface. The analytes (dichloromethane, p-xylene, and n-undecane) were coextracted from the aqueous sample in a 2-microL drop of 1-butyl-3-methylimidazolium hexaflourophosphate. Then, the syringe used to perform the SDME was directly introduced into the interface, which was held at 140 degrees C in order to achieve a complete volatilization of the target compounds. After the injection, the ionic liquid was retained in the interface, while a carrier gas transferred the volatilized analytes into the GC inlet. The optimization of the operational variables affecting the new interface (temperature, carrier flow rate, sample volume and injection technique) was accomplished. The analytes could be determined with detection limits in the low-nanogram per milliliter concentration range, and the relative standard deviations were between 3.3 and 4.4%.     

Characterization of an attenuated total reflection-based sensor for integrated solid-phase extraction and infrared detection

A novel attenuated total reflection (ATR) sensor, which integrates solid-phase extraction (SPE) and infrared detection, is presented. The flow cell, which enables the on-line coupling with a sequential injection system, is the core of the proposed sensor since it allows the continuous delivery of different solutions through the ATR and also the continuous spectrum acquisition. A SPE sorbent material (LiChrolut EN) was located in the sensitive element of the ATR without using any external coating substance, increasing the versatility of the system. A marked sensitivity enhancement was obtained as the analyte was concentrated before detection. The new sensor was qualitatively and quantitatively validated using the determination of caffeine in soft drinks as the model analytical problem. Linearity, precision (RSD = 4%), and sensitivity (LOD = 7 microg/mL) levels have been established. Finally, the main advantages and limitations of the new proposal are presented and compared with existing alternatives.     

Multiclass determination of sunscreen chemicals in water samples by liquid chromatography-tandem mass spectrometry

A novel analytical method based on solid-phase extraction (SPE) and liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) for the determination of UV sunscreen agents in the water environment is presented. After a thorough investigation of SPE and LC-MS/MS conditions, it permits the enrichment and determination of nine of these compounds in a single methodology, including three very polar sulfonates (e.g., 2-phenylbenzimidazole-5-sulfonic acid, PBSA) and six other less polar compounds (e.g., benzophenone-3, BP-3; octocrylene, OC,...). Other important matters of concern in the determination of UV filters at trace levels in water, i.e., adsorption on glassware and blank contamination problems, have also been discussed and minimized. This methodology affords detection limits between 7 and 46 ng L-1 and SPE recoveries in the range 63-102% from different real water matrixes, except for butylmethoxydibenzoylmethane (BM-DBM), which was not determinable in wastewater samples due to adsorption problems. The application of the method allowed reporting the levels of benzophenone-4 (BP-4) in environmental water samples for the first time, where it was identified as one of the most important in concentration among the UV filters studied, particularly in wastewater (237-1481 ng L-1).     

STD NMR study of the interactions between antibody 2G12 and synthetic oligomannosides that mimic selected branches of gp120 glycans

The human immunodeficiency virus type-1 (HIV-1) is able to shield immunogenic peptide epitopes on its envelope spike (a trimer of two glycoproteins, gp120 and gp41) by presenting numerous host-derived N-linked glycans. Nevertheless, broadly neutralizing antibodies against gp120 and gp41 have been isolated from HIV-1-infected patients and provide protection against viral challenge in animal models. Among these, the monoclonal antibody 2G12 binds to clusters of high-mannose-type glycans that are present on the surface of gp120. These types of glycans have thus been envisaged as target structures for the development of synthetic agents capable of eliciting 2G12-like antibodies. High-resolution structural studies of 2G12 and chemically defined glycan-type ligands, including crystallographic data, have been performed to gain an insight into this interaction. Further studies are still required to design a carbohydrate-based vaccine for HIV. Our previous NMR studies highlighted different recognition modes of two branched synthetic oligosaccharides, a penta- and a heptamannoside, by 2G12 in solution. In order to clarify the underlying structural reasons for such different behaviors, we have herein "dissected" the branches into the linear tri- and tetra- oligomannosides by chemical synthesis and studied their interactions with 2G12 in solution by saturation transfer difference (STD) NMR spectroscopy. The results confirm the distinct preferences of 2G12 for the studied branches and afford explanations for the observed differences. This study provides important structural information for further ligand optimizations. Possible effects of structural modifications on the solvent-exposed end of the ligands are also discussed.     

Assessment of the formation of inorganic oxidation by-products during the electrocatalytic treatment of ammonium from landfill leachates

This work investigates the formation of oxidation by-products during the electrochemical removal of ammonium using BDD electrodes from wastewaters containing chlorides. The influence of the initial chloride concentration has been experimentally analyzed first, working with model solutions with variable ammonium concentration and second, with municipal landfill leachates. Two different levels of chloride concentration were studied, i) low chloride concentrations ranging between 0 and 2000 mg/L and, ii) high chloride concentrations ranging between 5000 and 20,000 mg/L. Ammonium removal took place mainly via indirect oxidation leading to the formation of nitrogen gas and nitrate as the main oxidation products; at high chloride concentration the formation of nitrogen gas and the rate of ammonium removal were both favored. However, chloride was also oxidized during the electrochemical treatment leading to the formation of free chlorine responsible of the ammonium oxidation, together with undesirable products such as chloramines, chlorate and perchlorate. Chloramines appeared during the treatment but they reached a maximum and then started decreasing, being totally removed when high chloride concentrations were used. With regard to the formation of chlorate and perchlorate once again the concentration of chloride exerted a strong influence on the formation kinetics of the oxidation by-products and whereas at low chloride concentrations, chlorate appeared like an intermediate compound leading to the formation of perchlorate, at high chloride concentrations chlorate formation was delayed significantly and perchlorate was not detected during the experimental time. Thus this work contributes first to the knowledge of the potential hazards of applying the electro-oxidation technology as an environmental technology to deal with ammonium oxidation under the presence of chloride and second it reports efficient conditions that minimize or even avoid the formation of undesirable by-products.     

Free amino acids and biogenic amines in Alicante Monastrell wines

The simultaneous determination of 17 free amino acids and 8 biogenic amines in Alicante Monastrell wines was investigated for the first time. The quantification was carried out by using a RP-HPLC method, based on a pre-column derivatization with o-phthaldialdehyde (OPA) and fluorescence detection. From the results obtained it may be concluded that the most abundant free amino acids were Glu, Arg, Ala Asp, and Lys. None of the wine samples analysed had histamine (HIM) or Tyramine (TYM) levels above the limits considered as a possible toxic risk for healthy individuals. No measurable amounts of cadaverine (CAD) or methylamine (MEA) were found, showing no spoilage symptoms of sensory properties of the wines. Tryptamine (TRM) content was significantly higher in aged wines compared to young wines. However ethanolamine (ETA) content was lower. These data were used to make a preliminary classification of the samples using cluster analysis.