Polypyrrole composite membrane with high permeability prepared by interfacial polymerization

Novel polypyrrole (PPy)/polydimethylsiloxane (PDMS) composite membrane was prepared by interfacial polymerization to make a very effective gas separation membrane. We found that Polymerized PPy films as thin as ～200 nm could be chemically synthesized as freestanding membranes by using the interfacial polymerization technique. Additionally, we show that difference morphology of PPys films was obtained by controlling polymerization rate and more dense films were formed at low polymerization rate. Wide X-ray diffraction study showed the d spacing value of the PPy film decreased from 4.89 å to 3.67 å by the rate of polymerization decreases. According to d spacing value decrease, selectivity of a PPy composite membrane was increased dramatically and permeability was reduced gradually. This high selectivity was derived from d spacing closed to the kinetic diameter of nitrogen. These results indicated that the permeability is controlled by the diffusion coefficient, reflecting the packed structure of the PPy film. The highest selectivity value of composite membrane that was prepared by interfacial polymerization was O₂/N₂=17.2 and permeability for O₂ was 40.2 barrer.     

Interfacial tension measurement between immiscible polymers: improved deformed drop retraction method

This paper describes an improvement of the technique to measure interfacial tension in immiscible polymer blends. Our method is based on the droplet retraction method, in which one relates the kinetics of relaxation of a deformed droplet to the interfacial tension between the matrix and droplet. Previously, the problem with this technique has been the difficulty in preparing axisymmetric ellipsoidal droplets. In our work, we demonstrate that perfect axisymmetric ellipsoidal droplets are produced at a later stage of relaxation of short imbedded fibers. With this technique, we utilize the strengths of both the deformed droplet method and the imbedded fiber retraction method while overcoming their shortcomings. The interfacial tension value thus obtained was compared to that by conventional methods. Additionally, the effect of confinement by external walls on the interfacial tension measurement was studied. Confinement affects interfacial tension measurement when the gap between the walls is less than two times the equilibrium drop size.     

Electrochemical properties of boron-carbon-nitride films formed by magnetron sputtering

The electrochemical behavior of B_1.0C_2.4N_1.0 thin film was investigated in acidic, neutral and alkaline solutions. The anodic polarization curve of the film in 1 M NaOH showed the anodic dissolution of the film. The curve of the film in 1 M HCl showed no anodic dissolution. The cathodic polarization curve in 1 M NaCl showed shift to a negative potential side, but the anodic polarization curve was the same as that of Pt. The anodic dissolution in 1 M NaOH depended on potentials, that is, no anodic dissolution was recognized in a potential range of −0.2 to 0.1 V but the dissolution rate increased with increasing potential in a range of 0.1-0.6 V. The anodic current density of the film is directly proportional to the dissolution rate at potentials higher than 0.1 V. The dissolution rate of the film was increased with increasing solution pH.     

The European,Japanese and US protective helmet,gloves and boots for firefighters: thermoregulatory and psychological evaluations

The purpose of this study was to investigate the physiological and subjective responses of the European, Japanese (JPN) and US firefighters' helmet, gloves and boots for international standardisation. Three experimental conditions were evaluated (clothing mass: 9.4, 8.2 and 10.1 kg for the three conditions, respectively) at the air temperature of 32°C and 60% relative humidity. The results showed that there was no significant difference among the three conditions in oxygen consumption, heart rate, total sweat rate, rectal temperature and mean skin temperature, whereas peripheral temperatures and subjective perceptions were lower in the JPN condition than in the other conditions (P < 0.05). These results indicate that a 0.5-kg reduction in helmet mass and a 1.1-kg reduction in boot mass during exercise resulted in a significant decrease in head and leg temperatures and subjective perceptions, while a 1.9-kg reduction in total clothing mass had insignificant influences on the metabolic burden and overall body temperature.     

Social reader: towards browsing the social web

We describe Social Reader, a feed-reader-plus-social-network aggregator that mines comments from social media in order to display a user’s relational neighborhood as a navigable social network. Social Reader’s network visualization enhances mutual awareness of blogger communities, facilitates their exploration and growth with a fully dragn- drop interface, and provides novel ways to filter and summarize people, groups, blogs and comments. We discuss the architecture behind the reader, highlight tasks it adds to the workflow of a typical reader, and assess their cost. We also explore the potential of mood-based features in social media applications. Mood is particularly relevant to social media, reflecting the personal nature of the medium. We explore two prototype mood-based features: colour coding the mood of recent posts according to a valence/arousal map, and a mood-based abstract of recent activity using image media. A six week study of the software involving 20 users confirmed the usefulness of the novel visual display, via a quantitative analysis of use logs, and an exit survey.     

Comparison of YAG: Eu phosphors synthesized by supercritical water in batch and continuous reactors

Luminescent yttrium aluminum garnet (YAG, Y₃Al₅O₁₂) nanoparticles doped with Eu (10 at%) were synthesized in batch-type and continuous-type supercritical water (SCW) reactors. In the case of the continuous-type SCW method, the particles of YAG: Eu phosphors were much smaller and demonstrated a uniform spherical-like shape. Inversely, in the case of the batch-type SCW method, a needle-like or elliptical-like shape was formed because a finite amount of time was required to reach SCW conditions from ambient conditions. However, the emission intensity of YAG: Eu phosphors synthesized by using the batch-type SCW method was stronger. Therefore, it is concluded that the continuous-type SCW method is superior to the batch-type SCW method from the viewpoint of the particle size and shape, but the luminescence property of phosphors in the continuous-type SCW method needs to be improved. In addition, a calcination process slightly improved the luminescence intensities of YAG: Eu phosphors generated by using either the batch-type or continuous-type SCW methods.     

Synthesis of polystyrene/poly(butyl acrylate) core–shell latex and its surface morphology

A polystyrene (PS)/poly(butyl acrylate) (PBA) composite emulsion was produced by seeded emulsion polymerization of butyl acrylate (BA) with PS seed particles which were prepared by emulsifier‐free polymerization of styrene with potassium persulfate (KPS) under a nitrogen atmosphere at 70°C for 24 h with stirring at 60 rpm and swelled with the BA monomer in an ethanol/water medium. The structure of the PS/PBA composite particles was confirmed by the presence of the characteristic absorption band attributed to PS and PBA from FTIR spectra. The particles for pure PS and PS/PBA with a low content of the BA monomer were almost spherical and regular. As the BA monomer content was increased, the particle size of the PS/PBA composite particles became larger, and more golf ball‐like particles were produced. The surface morphology of the PS/PBA composite particles was investigated by AFM and SEM. The T_g's attributed to PS and PBA in the PS/PBA composite particles were found at 110 and ?49°C, respectively. The thermal degradation of the pure PS and PS/PBA composite particles occurred in one and two steps, respectively. With an increasing amount of PBA, the initial thermal decomposition temperature increased. On the contrary the residual weight at 450°C decreased with an increasing amount of PBA. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 595–601, 2003     

Synthesis and applications of unsaturated polyester resins based on PET waste

Three types of unsaturated polyester resins were synthesized from the glycolysis of polyethylene terephthalate (PET) plastic waste, considering environment, cost and properties for their applications. These synthesized unsaturated polyester resins could be used for various construction processes and materials such as no dig pipelining (NDR-1), pultrusion (PLR-1) and polymer concrete (PCR-1). PET was taken from common soft-drink bottles, and ethylene glycol (EG), diethylene glycol (DEG) and MPdiol glycol mixtures were used for the depolymerization at molar ratios. The glycolyzed PET 1 ^st products (oligomers) were reacted with maleic anhydride, phthalic anhydride and dicyclopentadiene (DCPD) (especially for polymer concrete) to form unsaturated polyester resins with mixed styrene. The lab scale (1–5 kg) and pilot plant scale-up tests (200 kg) were experimented to evaluate the processing characteristics, viscosity, acid number and curing behaviors. The main properties such as hardness, flexural strength, tensile strength, heat distortion temperature, elongation, and chemical resistance were determined based on the various uses of the three resins. Furthermore, the applicability and the properties of these developed resins were verified through many real application tests.     

Compression based clustering technique for enhancing accuracy in web scale videos

Multimedia Tools and Applications - Detection and clustering of commercial advertisements plays an important role in multimedia indexing also in the creation of personalized user content. In...     

Effect of low-cycle fatigue on the hot ductility of plain carbon steel

In a continuous casting steelmaking operation, the surface of a slab is under a condition that can be characterized as high-temperature, low-cycle fatigue in which the tensile and compressive stress is repeatedly developed. For this reason, for the evaluation of the hot ductility of a slab, considering the fatigue deformation is more feasible before a tensile or compressive test. In this study, the effects of low-cycle fatigue on the hot ductility of steels with a carbon content of 0.06–0.8 wt.% are investigated at various temperatures. For a carbon content of 0.06%, there were no significant differences between the RA values from a simple tensile test and those from a tensile test after fatigue deformation. The tendency of ductility deterioration with fatigue deformation is evident in 0.1 %C steel, and is due to the deformation-induced ferrite film that forms around the prior austenite grain. Conversely, high carbon steel containing 0.8 %C did not show a recovery of hot ductility in a low temperature region, and the specimen on which the tensile was measured after fatigue showed a higher hot ductility in the low temperature region, which is thought to result from the pearlite refinement effects. As the results obtained in this work showed noticeable differences in the hot ductility of carbon steel through the test conditions, it is suggested that for more accurate data, fatigue deformation be adopted in which the temperature range in an unbending operation is determined in the steelmaking factory.