Comparisons of adaptive fault‐tolerant insensitive control methods for a class of linear systems

In this paper, the problem of fault‐tolerant insensitive control is addressed for a class of linear time‐invariant continuous‐time systems against bounded time‐varying actuator faults and controller gain variations. Adaptive mechanisms are developed to adjust controller gains in order to compensate for the detrimental effects of partial loss of control effectiveness and bias‐actuator faults. Variations of controller gains arise from time‐varying and bounded perturbations that are supposed to always exist in adaptive mechanisms. Based on the disturbed outputs of adaptive mechanisms, three different adaptive control strategies are constructed to achieve bounded stability results of the closed‐loop adaptive fault‐tolerant control systems in the presence of actuator faults and controller gain variations. Furthermore, comparisons of convergence boundaries of states and limits of control inputs among adaptive strategies are developed in this paper. The efficiency of the proposed adaptive control strategies and their comparisons are demonstrated by a rocket fairing structural‐acoustic model.     

Application of nano-scale transition metal carbides as accelerants in anaerobic digestion

Four types of nano-scale transition metal carbides (HfC, SiC, TiC, and WC), used as accelerants in anaerobic digestion (AD) with cattle manure, were investigated through batch experiments under mesophilic conditions (37 ± 1 °C). The AD system with four carbide accelerants showed a higher biogas yield (463–499 mL/g TS), chemical oxygen demand (COD) degradation rate (58.62–78.90%) and total Kjeldahl nitrogen (TKN) concentrations (905.0–1077.0 mg/L) as compared with control check (CK, 294 mL/g TS, 46.99%, 290 mg/L). All of the digestate samples from the AD systems using four carbide accelerants showed not only higher degradation of organic compounds during thermal analysis, but also stronger fertilizer values. The use of transition metal compounds (TMCs) as accelerants in AD can efficiently improve the conversion of waste resources into biogas and fertilizers, which can potentially open new avenues for the use of TMCs in upcoming research on biomass energy.     

Silica/mullite fiber composite membrane with double-layer structure for efficient sub-micrometer dust removal

Here, we developed silica/mullite fiber composite membranes with double-layer structure by a simple vacuum procedure for the removal of sub-micrometer dust. The support with three-dimensional skeleton structure exhibited high porosity (higher than 90%), low density (lower than 0.25?g/cm³) and high compressive strength (higher than 0.55?MPa) at 1000?°C. By controlling the mass ratio of silica sol to mullite fiber, we can obtain uniform and complete filtering layers with different thicknesses. The composite membranes exhibited high PM filtration efficiency with 99% for 1–10?µm, 97% for 0.5?µm and 90% for 0.3?µm. These samples had high air flow with very low pressure drop (lower than 600?Pa when airflow velocity reached 1?m/s). These results indicated that the silica/mullite fiber composite membranes were very promising for PM pollution control in the field of hot gas filtration.     

Mechanism of enhancement in magnetoresistance properties of manganite perovskite ceramics by current annealing

Studies on spintronics have provided solid evidence that the grain boundaries (GBs) in polycrystalline manganite can produce a strong extrinsic magnetoresistance (MR). This type of MR, called Low-field MR (LFMR), is larger than the intrinsic MR and can be triggered over a wide range of temperature. However, the existence of more GBs would bring about the weakening of magnetism and decrease the magnitude of MR simultaneously. Here we show that during annealing the application of electric-current to a representative ferromagnetic manganite perovskite, polycrystalline La_2/3Sr_1/3MnO₃ (LSMO), can produce more GBs and improve low-field magnetization, which leads to enhanced MR effect and field-response sensitivity as compared to the traditional-annealed sample. By using static micromagnetic models combined with the theories of spin-polarized intergrain tunneling and charge carrier hopping across domain wall, the observed enhancement of magnetoresistive response in current-annealed LSMO can be well explained.     

Electro-synthesis of tungsten carbide containing catalysts in molten salt for efficiently electrolytic hydrogen generation assisted by urea oxidation

Energy-efficient production of hydrogen through urea electrolysis is still challenging due to the lack of satisfactory catalysts for urea oxidation reaction (UOR) and hydrogen evolution reaction (HER) in urea containing solution. In this study, Ni–W_xC/C (x = 1,2) composite with high activity for urea electrocatalysis was prepared by direct electro-reduction of affordable feedstock of NiO–CaWO₄–C in molten CaCl₂–NaCl at 873–973 K. The addition of graphite in precursor decreases the particle size of Ni. Introducing W_xC into Ni particles can reduce the overpotential for UOR. As a result, the obtained Ni-W_xC/graphite composite exhibits high current density for urea oxidation, which is about 11-folds and 52-folds higher than that of Ni/graphite and Ni (@1.53 V vs. RHE), respectively. After changing the carbon source from graphite to CNTs, the anodic current density was further increased by 43%, reaching 50.31 mA cm^?2. Moreover, the cathodic catalyst W_xC/CNTs obtained by the same preparation process exhibits high performance towards HER, with a low onset potential of 131.5 mV and a Tafel slope of 69.5 mV dec^?1. Assembling an electrolyzer using Ni-W_xC/CNTs as anode and W_xC/CNTs as cathode can yield a current density of 10 mA cm^?2 at merely 1.65 V in 1 M KOH/0.33 M urea aqueous solution, with excellent long-term electrochemical durability. The environmental-friendly production process uses affordable feedstocks for the synthesis of efficient catalysts toward urea electrolysis, promising an energy-saving hydrogen production as well as waste treatment.     

A novel hot aerosol extinguishing agent with high efficiency for Class B fires

A novel hot aerosol extinguishing agent (HAEA), which is the combination of pyrotechnics and flame retardant technology, was found to have great efficiency in extinguishing Class B fires. A mixture of P and P₃N₅, referred to as P90x, was chosen as the reductant, and phase stabilized ammonium nitrate was chosen as the oxidant. This paper describes a study of the effectiveness of this agent in extinguishing n‐heptane fires (ie, Class B fires). We determined that the best efficiency was 15 g/m³ for extinguishing n‐heptane fires, four times more efficient than a traditional agent. The efficiency increases as the mass fraction of P90x rises. We also identified the key difference between the novel extinguishing agent and the traditional agent. The former consists of an inorganic phosphorus compound, while the latter is mainly comprised of KOH. Consequently, their extinguishing mechanisms are different. The phosphorus oxide of the novel HAEAs is the leading component to extinguish fire, which is more effective than alkali salts.