Grafting maleic anhydride onto EVA and effect on the physical and rheological properties of PETG/EVA-g-MAH blends

Maleic anhydride (MAH) was grafted onto ethylene vinyl acetate copolymer (EVA) in the internal mixer in the presence of dicumyl peroxide (DCP), and a prepared reactive compatibilizer, MAH-g-EVA, was blended with Poly (ethylene glycol-co-cyclohexane-1,4-dimethanol terephthalate) (PETG). The gel content determination and element analysis (EA) was performed to confirm the grafting reaction. It was found that grafting reaction of MAH on to EVA could compete with crosslinking reaction of DCP during the modification process. In addition, the introduction of small amount of MAH showed a great effect on reducing gel content by decreasing crosslink reaction. As MAH content increased, grafted MAH concentration increased, whereas the grafting yield decreased. It was also confirmed that MAH-g-EVA acted as a reactive compatibilizer in the blend with PETG, and enhanced compatibility by reacting with the hydroxyl end groups, OH, of PETG. Addition of EVA in the blend leads a plastic deformation of PETG, and MAH had a great effect on enhancing interfacial adhesion resulting in significant increasing of % strain; however, improved compatibility could not be changed much in low strain tensile strength and Young's modulus. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Fabrication of an electrolyte-supported protonic ceramic fuel cell with nano-sized powders of Ni-composite anode

Composite anodes of nano-sized Ni and Ba(Zr_0.85Y_0.15)O_3-δ (BZY) were fabricated by infiltrating a single precursor solution of BZY and Ni into the BZY scaffold, and decreasing the calcination temperature to 1173 K. This decrease in the fabrication temperature of the Ni-cermet anode prevents the chemical reaction between the electrolyte and nickel, thus preventing a reduction in the conductivity of the electrolyte. By optimizing the amount of Ni in the Ni-cermet and infiltrating additional catalysts such as CeO₂ and Pd, the non-ohmic ASR of the Ni-cermet anode could be optimized. This resulted in a smaller non-ohmic ASR of anode than one that was fabricated by the conventional co-sintering method. Consequently, a high power density of 790 mW/cm² at 973 K can be obtained from electrolyte-supported cells.     

Expression of Aspergillus nidulans phy Gene in Nicotiana benthamiana Produces Active Phytase with Broad Specificities

A full-length phytase gene (phy) of Aspergillus nidulans was amplified from the cDNA library by polymerase chain reaction (PCR), and it was introduced into a bacterial expression vector, pET-28a. The recombinant protein (rPhy-E, 56 kDa) was overexpressed in the insoluble fraction of Escherichia coli culture, purified by Ni-NTA resin under denaturing conditions and injected into rats as an immunogen. To express A. nidulans phytase in a plant, the full-length of phy was cloned into a plant expression binary vector, pPZP212. The resultant construct was tested for its transient expression by Agrobacterium-infiltration into Nicotiana benthamiana leaves. Compared with a control, the agro-infiltrated leaf tissues showed the presence of phy mRNA and its high expression level in N. benthamiana. The recombinant phytase (rPhy-P, 62 kDa) was strongly reacted with the polyclonal antibody against the nonglycosylated rPhy-E. The rPhy-P showed glycosylation, two pH optima (pH 4.5 and pH 5.5), an optimum temperature at 45~55 °C, thermostability and broad substrate specificities. After deglycosylation by peptide-N-glycosidase F (PNGase-F), the rPhy-P significantly lost the phytase activity and retained 1/9 of the original activity after 10 min of incubation at 45 °C. Therefore, the deglycosylation caused a significant reduction in enzyme thermostability. In animal experiments, oral administration of the rPhy-P at 1500 U/kg body weight/day for seven days caused a significant reduction of phosphorus excretion by 16% in rat feces. Besides, the rPhy-P did not result in any toxicological changes and clinical signs.     

Effect of anode iridium oxide content on the electrochemical performance and resistance to cell reversal potential of polymer electrolyte membrane fuel cells

An ideal polymer electrolyte membrane fuel cell (PEMFC) is one that continuously generates electricity as long as hydrogen and oxygen (or air) are supplied to its anode and cathode, respectively. However, internal and/or external conditions could bring about the degradation of its electrodes, which are composed of nanoparticle catalysts. Particularly, when the hydrogen supply to the anode is disrupted, a reverse voltage is generated. This phenomenon, which seriously degrades the anode catalyst, is referred to as cell reversal. To prevent its occurrence, iridium oxide (IrO₂) particles were added to the anode in the membrane-electrode assembly of the PEMFC single-cells. After 100 cell reversal cycles, the single-cell voltage profiles of the anode with Pt/C only and the anodes with Pt/C and various IrO₂ contents were obtained. Additionally, the cell reversal-induced degradation phenomenon was also confirmed electrochemically and physically, and the use of anodes with various IrO₂ contents was also discussed.     

Identification of cellulolytic bacteria associated with tunic softness syndrome in the sea squirt, Halocynthia roretzi

The edible ascidian, sea squirt Halocynthia roretzi (Drasche) is marine invertebrate that is a valuable source of foods and bioactive compounds. A severe disease of the sea squirt characterized by degeneration of tunic fibers formed of bundled cellulose microfibrils has occurred. We hypothesized that bacteria lyse the cellulose fibril structure, cellulase activity may be a causative agent of the disease. Among the bacteria isolated from diseased sea squirt, Pseudoalteromonas sp. NO3 had cellulase activity based on a Congo red overlay assay and starch-reducing activity. Sea squirts exhibited 40–100% cumulative mortality after injection with Pseudoalteromonas sp. NO3 using doses of 2×10⁶?2×10⁸ colony forming unit (CFU)/individual. Dead sea squirts possess thinner and ruptured tunics, which were similar to natural outbreaks. These results suggest that Pseudoalteromonas sp. NO3 possessing cellulase activity is one of the causes of tunic softness syndrome in sea squirt.