Toxicity, accumulation and elimination studies of α-hexachlorocyclohexane (α-HCH) with freshwater organisms of different trophic levels

A short- and long-term toxicity study with α-hexachlorocyclohexane (α-HCH) was carried out with freshwater organisms of different trophic levels (algae, crustaceae and fishes). In this study mortality, immobilization, growth, reproduction, histopathologic changes and enzyme activities were chosen as criteria.Furthermore accumulation and elimination processes were investigated in separate organisms as well as the uptake of α-HCH by one organism and through a food-chain.Finally a tentative method for deriving an “ecological limit” for χ-HCH in surface water is described.     

The depositional environment of zinc, lead and cadmium in reservoir sediments

Despite low water retention dams and intervening reservoirs, reservoirs located downstream from a lead-zinc mining and milling area contain relatively higher concentrations of zinc, lead and cadmium than reservoirs in other areas. These metals are also concentrated in reservoir bottom sediments relative to surrounding soils. The zinc and lead content closely correlates to depth of water, organic content and percentage of clay-sized sediments. Zinc is preferentially weathered and transported from its source relative to lead. A model is developed in which the zinc and lead are transported by ionic and/or organo-metallic solution into reservoirs. Because of the relatively long residency time of water in reservoirs, the zinc and lead in the water is removed by clay minerals. Most of the zinc and lead content of the sediments is shown to be associated with sediments of specific gravity between 2·0 and 2·9. The efficiency of these reservoirs as a sink for zinc and lead results in the removal of an average 0·3 ppm zinc and 0·04 ppm lead from waters passing through Fort Gibson Reservoir.     

Coping with COPA II: Actions to Improve Effluent Quality

The paper outlines some of the actions taken by Severn Trent Water to achieve compliance with consent limits since the implementation of the Control of Pollution Act (Part II) in 1985.
Prior to and since 1985, Severn Trent Water has undertaken an extensive programme to analyse the reasons for failure and carry out remedial work. A major feature of this programme, which has been further stimulated by privatization, has been the need to reduce the lead time for carrying out improvements.
The paper discusses the means by which this has been achieved, including the introduction of the 'fast-track'initiative and the 'process matrix'.
Other aspects are outlined including initiatives to develop more robust processes, computerized work scheduling, extensive training programmes and best practice studies.     

Upgrading the Activated-Sludge Process for Total Nitrogen Removal in Hong Kong

In order to protect the sensitive waters in Tolo harbour (Hong Kong), Sha Tin and Tai Po sewage-treatment works were first designed to remove 70% of the nitrogen load from the sewage. Since then, due to continuing serious eutrophication problems in the harbour, both plants have been modified to increase the removal efficiency to 90%.
The modifications were based on the Bardenpho process. However, the designers of the two plants adopted different approaches to process intensity, complexity and control of bacterial foam. At Sha Tin, the average monthly results have shown an increase of total nitrogen removal from 60–70% to about 80% since its completion. The addition of methanol was found to be ineffective on further enhancement of the denitrification rate due to difficulties in the apportioning of the second anoxic zone. The overall monthly results for Tai Po have also shown an increase in the removal rate to about 80%, even though 90% was achieved for a short period of time. The major problem encountered at the latter plant was that the process design did not provide an effective control on bacterial foaming, which had affected the smooth operation of the process.     

The direct measurement of ppm levels of uranium in soils using high-resolution Ge(Li) gamma-ray spectroscopy

The direct determination of ²³⁸U in various soil samples was done by measuring the 63.3-keV transition from the decay of the first daughter ²³⁴Th. Potential errors resulting from the chemical non-equilibrium of ²³⁸U with its daughters are thus avoided. The method sensitivity is 1 ppm compared to the 35 ppm obtainable by employing the 1001-keV gamma ray. A Ge(Li) gamma-ray spectrometer is the only analytical tool required. Examples are offered that demonstrate the usefulness of the technique for routine, inexpensive environmental monitoring of uranium. The technique also has the capability of providing information on the ²³⁸U/²³⁵U isotopic ratio.     

Cost-benefit analysis of the use of TBT: the case for a treatment approach

The current climate of hostility towards the use of tributyltin (TBT) as an active ingredient in ship anti-fouling paint appears to be based on a very biased assessment of its environmental impact. While many national and international regulatory agencies are moving towards further restriction, and a complete ban is under active discussion, a number of factors appear to have been ignored. The economic impact of a ban on TBT when no adequate substitute exists could be substantial. Environmentally, consequences would include a substantial increase in the consumption of fossil fuel, with corresponding increases in carbon dioxide and sulphur dioxide emissions; the construction of more vessels; the transfer of ship-building, ship-repairing and ship-breaking activities from well-regulated to unregulated or under-regulated areas in the developing world; and a shift from sea transport to less environmentally acceptable forms of transport. Experience in Europe and other parts of the developed world shows that existing restrictions, where they are properly enforced, are probably adequate to alleviate the environmental damage associated with TBT. Some existing legislation acts to inhibit the search for effective substitutes. The environmental benefits of TBT have been ignored. Little thought has been given to a technical, rather than a legislative solution to controlling TBT inputs to the environment. A method is described for treating TBT-contaminated wastewaters, which has been successfully tested in prototype at full scale. Legislative measures against TBT will do nothing to address the problem of the existing backlog of contaminated material, nor even to permit the IMO proposal for the removal of TBT from all ships by 2008 to be successfully concluded in an environmentally safe manner, since no provision has been made for the disposal of the existing TBT; most probably it will be dumped in environmentally sensitive, unregulated areas in the developing world.     

SEM-EDX analysis in the source apportionment of particulate matter on Hypogymnia physodes lichen transplants around the Cu smelter and former mining town of Karabash, South Urals, Russia

Scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDX) of particulate matter on lichen transplant thalli (Hypogymnia physodes) was assessed as a complementary technique to wet chemical analysis for source apportionment of airborne contaminants. Transplants (2 month exposure) stationed in the Cu smelter and former mining town of Karabash were compared with those from a control site 30 km south. Particulate matter in Karabash samples (715 analyses) showed higher levels of S, Pb, Cu, Sn and Zn compared with the control (598 analyses). Complex element associations among the particles confounded detailed mineralogical identifications, and therefore a simplified particle classification scheme was devised for source apportionment. Karabash samples contained high levels of particles classified as mining-related (MRP), and these were also identified in control samples, indicating wide spatial dispersion from the smelter and highlighting the sensitivity of the method. It was noted that MRP <2.5-microm diameter were poorly represented on lichen surfaces suggesting this may limit the usefulness of Hypogymnia transplants as proxies when assessing human health impacts from airborne particulates. Analyses of the lichen thallus surface (away from surface particulates) revealed high levels of Cu, Zn, Fe and Pb associated with organics in the Karabash samples compared with the control, with a proportionate loss of K, interpreted as being due to a stress-related increase in cell membrane permeability. This type of analysis may provide a novel SEM-EDX-based method for assessing lichen vitality. The techniques developed are presented and further implications of the study are discussed.     

The characterisation of friction stir welding process effects on stiffened panel buckling performance

The introduction of advanced welding methods as an alternative joining process to riveting in the manufacture of primary aircraft structure has the potential to realise reductions in both manufacturing costs and structural weight. However, welding processes can introduce undesirable residual stresses and distortions in the final fabricated components, as well as localised loss of mechanical properties at the weld joints. The aim of this research is to determine and characterise the key process effects of friction stir welding assembly methods on stiffened panel static strength performance. Utilising experimentally validated finite element modelling methods, it is demonstrated that welding induced residual stresses have a significant influence, and that collapse behaviour is less sensitive to advanced process effects and process effect magnitudes than panel initial buckling behaviour.