Characterization of nickel manganite NTC thermistor films prepared by aerosol deposition at room temperature

NiMn₂O_4+δ thermistor thick films have been successfully deposited by the so-called Aerosol Deposition Method (ADM) at room temperature on alumina substrates, Si-wafers, as well as on special planar four-wire interdigital electrode structures for high-precision electrical characterization. The NTCR films are homogeneous, completely dense and scratch resistant. Both as-deposited and tempered, the NTCR films exhibit a cubic spinel structure. Between 25 °C and 90 °C, the NTCR film resistance behaves as it is typical for variable range hopping (VRH) with parabolic density of states. As a result of moderate film tempering, the thermistor constant B and the specific resistance at 25 °C (ρ₂₅) decrease from 4250 K to 4020 K and 65 Ω·m to 40 Ω·m respectively, and are close to bulk values. In combination with the excellent reproducibility of the ρ₂₅ and B values, AD processing of films appears to be a promising alternative for classical ceramic bulk processes.     

Optimization of LED‐based light blendings for object presentation

This study looks at the perceived quality of light‐emitting diode (LED)‐based lighting of various colors. The objective was to find out whether LEDs could provide better (i.e., more relevant and acceptable) lighting than that which is obtained with standard halogen or fluorescent sources. The perception of objects was assessed under different lighting schemes. Subjects were invited to add red, cyan and/or amber to white LED‐based light to match the halogen and fluorescence rendering on specific targets: a color chart and a painting. They were also asked to rate the difference between the two, and to express their preference. The results obtained for the perception of LED‐based lighting were quite positive. Color blendings of LED light were found to provide illuminated situations similar to halogens or fluorescent sources. These blendings were well accepted, and indeed often preferred, although the color rendering index (CRI) was always low. This indicates that the CRI as it stands is inadequate to characterize the color rendering of solid‐state light sources, and needs to be updated. LED‐based lighting systems seem to have considerable potential for use in shops and display units, where they may well outperform existing lighting systems. © 2009 Wiley Periodicals, Inc. Col Res Appl, 34, 310–320, 2009     

Iron compounds electrodeposited onto a transparent semiconductor: Synthesis and characterisation by UV-vis spectroscopy

Homogeneous thin layers of lepidocrocite, green rust incorporating chloride anions (GRCl-GR1) and green rust incorporating sulphate anions (GRSO₄-GR2) were successfully electrodeposited onto tin dioxide substrate (SnO₂). The UV-vis spectroscopy absorbance, measured just after synthesis, increases linearly with the amount of iron compounds confirming that the electrodeposition is a homogeneous process. From the spectra, the absorption coefficients were determined for the three compounds. The monitoring by UV-vis spectroscopy measurements in real time of the oxidation in the air of the two unstable compounds, GRCl and GRSO₄, shows that the two green rusts have a different behaviour due to their own structure. The presence of an isobestic point in the case of GRSO₄ translates one equilibrium with its oxidised compound. This phenomenon is not observed for GRCl, however, the characteristic variation of the absorbance in the high wavelengths gives information on its oxidation reaction. From simple measurements, fruitful information on green rusts is obtained and this experimental system may be applied to other unstable solid compounds.     

Fabrication and evaluation of solid-oxide fuel cell anodes employing reaction-sintered yttria-stabilized zirconia

This paper reports on the fabrication and performance of solid-oxide fuel cell (SOFC) anodes utilizing yttria reaction-sintered zirconia (YRSZ). Through the reaction-sintering process, the technical-grade YSZ commonly used in the Ni-YSZ anode cermet is replaced with lower-cost ZrO₂ and Y₂O₃ materials. When sintered in the presence of nickel oxide, ZrO₂ and Y₂O₃ form cubic-phase YSZ at temperatures characteristic of SOFC processing (1400-1550 °C). Reaction sintering enables the formation of YSZ during cell fabrication, reducing SOFC anode raw-materials cost and the number of SOFC-fabrication processes. This paper reports the results of a broad range of characterization and performance measurements to evaluate the YRSZ material, including (1) crystal structure, (2) morphology, (3) pore-size distribution, (4) electronic resistivity, (5) fracture strength, (6) gas transport and catalytic activity, and (7) electrochemical performance. Material properties and performance are found to be comparable to or better than equivalent materials fabricated by conventional processes.     

Radiofrequency catheter ablation of common atrial flutter: significance of palpitations and quality-of-life evaluation in patients with proven isthmus block

BACKGROUND: Creation of a complete bidirectional inferior vena cava-tricuspid annulus isthmus block (CBIB) by radiofrequency catheter ablation is now a well-accepted criterion for prevention of common atrial flutter (AFl) recurrences. However, some patients still complain of palpitations after ablation, and it is not known whether these are related to AFl recurrences or to other arrhythmias. METHODS AND RESULTS: Among 100 consecutive patients referred to our institution for AFl ablation, CBIB was created in 83. There were 54 patients (group A) in whom AFl was the only documented arrhythmia before ablation and 29 patients (group B) in whom atrial fibrillation (AFib) had been documented in addition to AFl. An electrophysiological control study was performed in 40 patients 1 to 3 months after ablation. Arrhythmic events, medications, and functional status were evaluated at midterm follow-up (n=77; 14. 7+/-8.4 months; range, 4 to 34 months). The SF-36 questionnaire and the Symptom Checklist--Frequency and Severity Scale specific for cardiac arrhythmia were used to assess quality of life in 63 patients at long-term follow-up (27.1+/-8.5 months). Recurrence of AFl was documented in only 1 patient 6 months after ablation. AFib was recorded in 28 patients (36.4%), and atypical AFl was found in 3 patients. Thirty-two group A patients (66.7%) and 17 group B patients (58.6%) were still arrhythmia free at midterm follow-up. Even at long-term follow-up and in group B patients, AFl ablation was followed by a clear improvement in quality of life. CONCLUSIONS: Palpitations after creation of CBIB are due mostly to AFib but not to AFl recurrence. This technique provides a significant and persistent clinical benefit and may suppress all atrial arrhythmia in a subset of patients suffering from both AFl and AFib.     

拉拉君堡的采收之旅

9月我从上海出发，坐了十多个小时的飞机经巴黎辗转到达波尔多，从机场驱车沿着齐隆河（Gironde）左岸北上高梅多克（Haut Medoc），20分钟后司机提醒我到达了这条公路上的第一家列级酒店。     

Thermal inactivation kinetics of alkaline phosphatase in equine milk

Alkaline phosphatase (ALP) is widely used as an indicator of proper pasteurization in bovine milk. Due to interest in the use of equine ALP as a time/temperature integrator (TTI) for evaluation of the efficacy of thermal processing of equine milk, its inactivation kinetics were evaluated in whole and skimmed equine milk. Experimentally determined decimal reduction times showed that equine ALP is more readily inactivated in equine milk than its bovine counterpart. Thus, considering the required 6 D reduction of pathogens and the rather low enzyme level present in equine milk, equine ALP will not be suitable as indicator for correct pasteurization of equine milk under the conditions currently used in the reference method for the determination of ALP in milk-based products.