CEA and AREVA R&D on HTR fuel fabrication and presentation of the CAPRI experimental manufacturing line

In the framework of the French V/HTR fuel development and qualification program, the Commissariat à l’Energie Atomique (CEA) and AREVA are conducting R&D projects covering the mastering of UO₂ coated particle and fuel compact fabrication technology. To fulfill this task, a review of past knowledge, of existing technologies and a preliminary laboratory-scale work program have been conducted with the aim of retrieving the know-how on HTR coated particle and compact manufacture:

• The different stages of UO₂ kernel fabrication GSP process have been reviewed, reproduced and improved.

• The experimental conditions for the chemical vapor deposition of coatings have been defined on dummy kernels and development of innovative characterization methods has been carried out.

• Former CERCA compacting process has been reviewed and updated.

In parallel, an experimental manufacturing line for coated particles, named GAIA, and a compacting line based on former CERCA compacting experience have been designed, constructed and are in operation since early 2005 at CEA Cadarache and CERCA Romans, respectively. These two facilities constitute the CAPRI line (CEA and AREVA PRoduction Integrated line).The major objectives of the CAPRI line are:

• to recover and validate past knowledge,

• to produce representative HTR TRISO fuel meeting industrial standards,

• to permit the optimization of reference fabrication processes for kernels and coatings defined previously at a laboratory-scale and the investigation of alternative and innovative fuel design (UCO kernel, ZrC coating),

• to test alternative compact process options and

• to fabricate and characterize fuel required for irradiation and qualification purpose.

This paper presents the status of progress of R&D conducted on HTR fuel particles and compact manufacture by early 2005 and the potential of the laboratory-scale HTR fuel CAPRI line.     

Satellite-derived parameters for biological modelling in coastal waters: Illustration over the eastern continental shelf of the Bay of Biscay

In biological modelling of the coastal phytoplankton dynamics, the light attenuation coefficient is often expressed as a function of the concentrations of chlorophyll and mineral suspended particulate matter (SPM). In order to estimate the relationship between these parameters over the continental shelf of the northern Bay of Biscay, a set of in situ data has been gathered for the period 1998-2003 when SeaWiFS imagery is available. These data comprise surface measurements of the concentrations of total SPM, chlorophyll, and irradiance profiles from which is derived the attenuation coefficient of the photosynthetically available radiation, K_PAR. The performance of the IFREMER look-up table used to retrieve the chlorophyll concentration from the SeaWiFS radiance is evaluated on this new set of data. The quality of the estimated chlorophyll concentration is assessed from a comparison of the variograms of the in situ and satellite-derived chlorophyll concentrations. Once the chlorophyll concentration is determined, the non living SPM, which is defined as the SPM not related to the dead or alive endogenous phytoplankton, is estimated from the radiance at 555 nm by inverting a semi-analytic model. This method provides realistic estimations of concentrations of chlorophyll and SPM over the continental shelf all over the year. Finally, a relationship, based on non living SPM and chlorophyll, is proposed to estimate K_PAR on the continental shelf of the Bay of Biscay. The same formula is applied to non living SPM and chlorophyll concentrations, observed in situ or derived from SeaWiFS radiance.     

A Cost-Regular Based Hybrid Column Generation Approach

Constraint Programming (CP) offers a rich modeling language of constraints embedding efficient algorithms to handle complex and heterogeneous combinatorial problems. To solve hard combinatorial optimization problems using CP alone or hybrid CP-ILP decomposition methods, costs also have to be taken into account within the propagation process. Optimization constraints, with their cost-based filtering algorithms, aim to apply inference based on optimality rather than feasibility. This paper introduces a new optimization constraint, cost-regular. Its filtering algorithm is based on the computation of shortest and longest paths in a layered directed graph. The support information is also used to guide the search for solutions. We believe this constraint to be particularly useful in modeling and solving Column Generation subproblems and evaluate its behaviour on complex Employee Timetabling Problems through a flexible CP-based column generation approach. Computational results on generated benchmark sets and on a complex real-world instance are given.A preliminary version of this paper appeared as [7]. This research was supported by the Mathematics of Information Technology and Complex Systems (MITACS) Internship program in association with Omega Optimisation Inc. (CA).     

Conductivite ionique dans les systems Na1+xZr2−xLx(PO4)3 (L = Cr,Yb)

Ionic conductivity measurements in the solid solution Na_1+xZr_2?xL_x(PO₄)₃ (L = Cr, Yb) have been carried out. The materials have a Nasicon-type structure in a 0 ? x ? x^max._L range (x^max._Cr = 2.0 and x^max._Yb = 1.9). A small monoclinic distortion appears at low temperature for Na₃Cr₂(PO₄)₃. As in the Na_1+xZr₂P_3?xSi_xO₁₂ system a strong increase of the conductivity with rising x has been observed. The results are discussed in connection with temperature and structural parameters.     

Tight LP bounds for resource constrained project scheduling

The best lower bound for the Resource Constrained Project Scheduling Problem is currently based on the resolution of several large Linear Programs (Brucker & Knust, EJOR, 107: 272-288, 1998). In this paper, we show that (1) intensive constraint propagation can be used to tighten the initial formulation of the linear programs and (2) we introduce several sets of valid cutting planes. These improvements allow us to close 16 new instances of the PSPLIB with 60 activities and to improve the best known lower bounds of 64 instances.Correspondence to:Philippe BaptisteThe authors would like to thank Peter Brucker and Sigrid Knust for providing their source code as well as Christian Artigues, Jacques Carlier and Philippe Michelon for enlightening discussions on project scheduling.     

Diffusional fluorescence quenching of aromatic hydrocarbons

The quenching of the fluorescence of five aromatic hydrocarbons by three halogenated organics and by molecular oxygen has been measured. Both fluorescence intensity and fluorescence lifetime measurements have been employed to validate results and interpretation; linear Stern-Volmer analyses are shown to apply throughout. The fluorescence quenching rate constant of molecular oxygen for the five aromatic hydrocarbons is essentially equivalent to the diffusion rate constant independent of the fluorophore excitation energy. The halogenated organic-fluorophore rate constants vary by a factor of 965 and are shown to correlate roughly with the energy difference between the quencher and fluorophore excited electronic states in accord with a standard model of quantum two-level mixing. The value of the coupling interaction energy is approximately 2500 cm(-1).     

High pass filter with above IC integrated SrTiO3 high K MIM capacitors

This paper describes realization and characterization of SrTiO₃ (STO) high K MIM capacitors above BiCMOS integrated circuit (IC). These capacitances are connected to IC and are used as coupling capacitors in order to realize a high pass filter. Surface capacitance achieved is 10 nF/mm² with capacitance value of 1.2 nF. The process for STO MIM fabrication does not exceed 400 °C, which is compatible with interconnections. Typical K and dielectric losses values obtained are, respectively 110% and 2%. Yield obtained reaches 83% for capacitors. A functional high pass filter using these STO capacitors was realized in this study. It exhibits a cut-off frequency at 6.5 kHz and a constant gain at higher frequencies of −1.3 dB.     

Influence of hysteresis on the transient hygrothermal response of a hemp concrete wall

Building envelopes with bio-materials like hemp concrete are currently undergoing an increasing development due to their low environmental impact and their interesting hygrothermal properties. This kind of hygroscopic material is characterized by a hysteretic behaviour. In this paper, the influence of such behaviour on the hygrothermal response of a building wall is discussed. An experimental facility is designed to measure temperature and relative humidity within a hemp concrete wall submitted to climatic variations. This facility provides a set of experimental data suited for benchmarking. Numerical simulations are performed with a hysteresis model implemented in a heat and moisture transfer model. Comparisons between numerical and experimental results show that hysteresis modelling is relevant to simulate the hygrothermal response of the wall. The discussion is extended to the influence of the initial moisture content.