Fabrication of fluoropolymer-modified hydrophobic functionalization of cotton fabric by admicellar polymerization

Herein, a hydrophobic polyfluoroacrylate adhered cotton fabric having a smart affair with water under oil, is developed using a simple surfactant-assisted polymerization technique commonly known as admicellar polymerization of low surface energy trifluoroethyl acrylate monomer. The hydrophobicity of the treated substrates was determined by the contact angle. The results show that the cotton fabric became hydrophobic. The surface investigation conducted by scanning electron microscopy (SEM) provided distinctive features of the untreated and treated fabric samples. The elementary analysis was also carried out on the substrate through energy dispersive X-ray to confirm the presence of hydrophobic groups. In addition to this, the hydrophobic cotton fabric shows excellent durability against home laundering and simple adhesive peel testing.     

Synthesis of Nanofiber‐like Mesoporous γ‐Al2O3 toward Its Adsorption Efficiency for Congo Red

Nanofiber‐like mesoporous γ‐Al₂O₃ was synthesized using freshly prepared boehmite sol in the presence of triblock copolymer, P123 following evaporation‐induced self‐assembly (EISA) process followed by calcinations at 400°C–1000°C. The samples were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X‐ray diffraction (XRD), N₂ adsorption–desorption, and transmission electron microscopy (TEM). The adsorption efficiency of the samples with Congo red (CR) was studied by UV – vis spectroscopy. XRD results showed boehmite phase in the as‐prepared sample while γ‐Al₂O₃ phase obtained at 400°C was stable up to 900°C, a little transformation of θ‐Al₂O₃ resulted at 1000°C. The Brunauer‐Emmett‐Teller surface area of the 400°C‐treated sample was found to be 175.5 m²g ^{? 1}. The TEM micrograph showed nanofiber‐like morphology of γ‐Al₂O_3. The 400°C‐treated sample showed about 100% CR adsorption within 60 min.     

Probing the Influence of Alloyed Sn on Pt(100) Surface Chemistry by CO Chemisorption

The chemisorption properties of the c(2×2) and (3√2×√2)R45° Sn/Pt(100) alloy surfaces, along with the clean Pt(100) surface, were investigated using CO as a probe molecule. Temperature-programmed desorption (TPD) studies revealed a reduction in CO desorption peak temperature, and thus the chemisorption bond energy, by alloying Sn into the Pt(100) surface. A large decrease was observed in the saturation coverage of CO on these alloyed surfaces at 150 K compared to the Pt(100) surface. The initial sticking coefficient of CO was found, however, to be nearly independent of the surface Sn concentration. High-resolution electron energy loss spectroscopy (HREELS) studies showed that CO was only chemisorbed on atop sites on both alloys. Sn incorporation results in isolated Pt atoms at the surface of these two Sn/Pt(100) alloys and eliminates the possibility of CO bonding to multiple Pt centers, i.e., to pure-Pt 2- and 3-fold bridging sites.     

Kinetics of combined noncatalytic and catalytic hydrolysis of jute fiber under ultrasonic–far infrared energy synergy

Hydrolysis of pretreated waste jute fiber was intensified for maximizing reducing sugar (RS) yield deploying a novel reactor equipped with ultrasonic–far-infrared-waves (US–FIRW). At optimal 70°C temperature, 2.5 wt% Amberlyst-15 catalyst concentration, 15 min hydrolysis time and 10 (wt/wt) water loading; US–FIRW rendered significantly greater RS yield (74.82 mol%) compared to other reactors provided with far-infrared-wave (69.63 mol%), ultrasonication (50.34 mol%), and conventional thermal system (48.16 mol%). Kinetic models were developed considering noncatalytic-pseudo-homogenous (NCPH) in addition to the combined catalytic-pseudo-homogeneous (CPH) and catalytic heterogeneous (CHE) hydrolysis pathways. The results revealed that pseudo-homogenous–heterogeneous Eley–Rideal (PHHER) model could represent the hydrolysis kinetics most accurately. Remarkably, the lowest activation energy [16.75 kJ mol⁻¹ (NCPH), 13.82 kJ mol⁻¹ (CPH), 40.01 kJ mol⁻¹ (CHE)] required in US–FIRW evidently established its greater energy-efficiency among investigated reactors. The novel reactor and the simulated kinetic models can be applicable to other lignocellulosic biomass conversion for sustainable biorefinery.     

Fabrication of two sites hydrophobicity on cotton surface – a fluoropolymerization approach

Cotton fabric on both surfaces was coated with polymerization of fluoromonomer followed by adsorption of fluorosurfactant by a new technique admicellar polymerization to obtain durable hydrophobicity. Water repellence properties were determined in terms of simple drop test contact angles. The coating on cotton fabric exhibited the right water contact angle of 137.23° and left contact angle 138.35° (an average value of 137.79°). However, the durability of the coatings was decreased after simple home laundering with a decrease in water contact angle value. The surface morphology was evaluated by scanning electron microscopy before and after polymerization. Beside this chemical composition on the cotton, the surface was evaluated by EDS analysis to determine the number of fluorine moieties deposited on the cotton surface by this technique.     

Testing and Diagnosis of Digital Microfluidic Biochips using Multiple Droplets

Digital microfluidic biochip is a promising alternative to the traditional cumbersome laboratory equipment. Such automated biochips are used in many critical applications. Hence dependability is an essential attribute before the chip is in use. Due to mixed integration technologies, these chips have some unique failures. Hence robust offline and online tests are proposed to check the health of the biochips. When a chip undergoes a test in offline mode, then the entire biochip should be available for testing, whereas for the online mode test droplet might be stalled due to unavailability of the next cell in the routing path. However, in both the scenarios one or more droplets route across the chip and the arrival time is also recorded at the destination. So here we have proposed two test schemes to know the correctness of any biochip. Diagnosability is an important feature to find the exact position of the faulty electrode. Our proposed scheme reduces the overall testing and diagnosis time significantly. It also provides an alternative routing path in biochip for fault tolerance.