Dielectric behavior of polystyrene foam at microwave frequency

Polystyrene foams have been generated and fabricated into differently shaped structures', by change of steaming period under constant impregnation time and solvent-nonsolvent composition. Optical photomicrographs of samples both plain and wax-copper-coated reveal uniform appearance, distinct grain-boundaries, and random cell size distribution. Dielectric measurements have been made on test specimens cut according to wave-guide size at 9.375 GHz X-band microwave frequency by short-circuited wave-guide method of Smith and Hippel modified by Dakin and Works. Dielectric constants are linear, on direct and semi-log scales in bulk-density and volume-fraction, obeying Weiner's inequalities. Formulae of Landau-Lifshitz, Beer, Maxwell-Wagner, Odelevsky, etc. have been tried. Data fit best with the logarithmic law of Lichtenecker and Rother. Specific polarization is also a true function of density. Dielectric constant vs bulk-density plots of foams resemble dielectric-constant vs fractional-density plots based on the theoretical derivation by Smith for polystyrene compacts, signifying that compacts containing closely-spaced oblong-spherical particles arc physically similar to foams having spherical gas inclusions in plastic structures. Tan δ lying in the range 0.002–0.0038 results from conformational polarization (β-relaxation at room-temperature for wide-angle torsional oscillations of side-groups with co-operative motion from wriggling chains). It is therefore possible for low-loss foam dielectrics suitable for micro-wave applications to be made by this method.     

Kinetics, mechanism, isotherm and thermodynamic analysis of adsorption of cadmium ions by surface-modified Strychnos potatorum seeds

The surface-modified Strychnos potatorum seeds (SMSP) were used as an effective low-cost adsorbent for the removal of cadmium ions from aqueous solution. SMSP was characterized by Fourier transform infrared spectroscopy and scanning electron microscopic analyses. The effect of operating variables such as solution pH, adsorbent dose, contact time, initial cadmium ions concentration and temperature on the removal of cadmium ions were studied in a batch mode adsorption operation. The optimum conditions for the adsorption of cadmium ions onto the SMSP were found to be: pH of 5.0, SMSP dose of 2 g/L, contact time of 30min, temperature of 30 °C for an initial cadmium ions concentration of 100 mg/L. Kinetic data were analyzed using the pseudo-first order and pseudo-second order kinetic equations, intraparticle diffusion model, Boyd kinetic model and shrinking core model. The characteristic parameters for each model have been estimated. Adsorption of cadmium ions onto the SMSP follows the pseudo-second order kinetic model. The rate-limiting steps in the adsorption process were found to be external and internal diffusion. Equilibrium data were well described by the Langmuir isotherm model than the Freundlich isotherm model, which yields a maximum monolayer adsorption capacity of 200 mg/g. Thermodynamic parameters such as standard free energy change, enthalpy change and entropy change were also estimated. The results show that the removal of cadmium ions by the SMSP was found to be spontaneous and exothermic.     

Effect of organoclay addition on the two-body abrasive wear characteristics of polyamide 6 nanocomposites

Polymer clay nanocomposites (PCN) exhibit improved mechanical properties due to nanolevel dispersion of clay in the polymer matrix. They also exhibit good tribological performance under dry sliding conditions. Abrasive wear behaviour of these materials would be different from dry sliding behaviour as the mechanisms of the both are entirely different. Hence the abrasive wear behaviour of these materials needs to be investigated. The abrasive wear characteristics of polyamide 6 nanocomposites, with 1, 3 and 5% (wt.) clay prepared by melt intercalation technique, under two-body abrasive wear conditions have been reported. Abrasive wear tests were conducted using a pin-on-disc tribometer containing an abrasive counterface. All the polyamide nanocomposites investigated exhibited a low abrasive wear resistance compared with pristine Nylon. The wear performance of the nanocomposites was correlated with the mechanical properties. Dominant ploughing and cutting wear were observed in polymer clay nanocomposites. The amount of clay present alters the wear mechanism.     

Preparation and pharmacodynamic evaluation of liposomes of indomethacin

The side effects of indomethacin, such as ulceration of the kidney and central nervous system (CNS) toxicity, limit its use as a drug for rheumatoid arthritis. Encapsulation of this drug in liposomes may reduce the toxic effects. The aim of this study was to determine the factors influencing encapsulation of indomethacin in liposomes and to determine anti-inflammatory potential of liposomal indomethacin. A series of liposomal formulations of indomethacin were prepared using various phospholipids. The effects of method of preparation, lipid composition, charge, and cholesterol (CH) on encapsulation of indomethacin in liposomes were investigated. A significant variation in encapsulation of the drug in liposomes was observed when prepared by different methods. With all the methods of preparation tried, the favorable lipid composition for high encapsulation of this drug was egg phosphatidyl choline:CH: stearlyamine (PC:CH:SA) at a 1:0.5:0.1 molar ratio. Inclusion of cholesterol did not affect the encapsulation efficiency of the drug in liposomes. The drug release profile from the liposomes was biphasic, and the highest percentage drug release was observed with large unilamellar vesicles (LUVs) (100 nm). Inclusion of stearylamine (PC:CH:SA 1:0.5:0.1) and phosphatidyl glycerol (PG) (PC:CH:PG 1:0.5:0.2) in the liposomes reduced the release of the drug in comparison to the neutral liposomes (PC:CH 1:1). The slow release of the drug from stearylamine-containing liposomes may be explained by the electrostatic interaction between the acid moiety of the drug and the amine moiety of the lipid. It is assumed that the possible hydrogen bonding between--OH groups of phosphatidyl glycerol and the--COOH group of the drug might be the reason for the slow release of the drug from PC:CH:PG (1:0.5:0.2) containing liposomes. Pharmacodynamic evaluation of the liposomes was performed by carrageenan-induced rat paw edema (acute) and adjuvant arthritis (chronic) models. The anti-inflammatory activity was increased from the first to fifth hour PC:CH:PG (1:0.5:0.2) and PC:CH:SA (1:0.5:0.1) liposomes showed the highest percentage inhibition of edema. In both these models, anti-inflammatory activity of liposomal indomethacin was significantly higher than that of free indomethacin (p < .01). The ulcer index of the free drug was about three times more than the encapsulated drug when administered at the same dose intraperitoneally to arthritic rats consecutively for 21 days.     

Phytochemicals-mediated green synthesis of gold nanoparticles using Pterocarpus santalinus L. (Red Sanders) bark extract and their antimicrobial properties

In the present study, phytochemicals-mediated rapid, stable and eco-friendly synthesis of gold nanoparticles (GNPs) using Pterocarpus santalinus L. (Red Sanders) bark extract is reported. The powerful characteristics of different phytochemicals present in P. santalinus L. bark prompted us to determine their efficacy in the bio-reduction of gold chloride trihydrate to the corresponding GNPs. The biosynthesis of GNPs was investigated at the physiological condition (pH?=?7.4). The synthesized GNPs were characterized by UV–visible spectroscopy by measuring the peak in the range of 400–700?nm. The GNPs synthesized at physiological conditions revealed surface plasmon resonance (SPR) at 545?nm. The crystalline nature of GNPs was confirmed by using x-ray diffraction (XRD), and the functional groups adhered on the surface of the GNPs were analyzed by Fourier Transform Infrared spectroscopy (FTIR). Transmission Electron Microscopy (TEM) analysis showed spherical GNPs in the size range of 13–26?nm. The synthesized GNPs exhibited antibacterial activity against Gram-positive and Gram-negative bacterial strains.     

Impression creep of monolithic and composite lead free solders

Even though several EMS (Electronic manufacturing services) companies are currently producing “lead free” products, a general notion of apprehension still exists in the industry, primarily due to the lack of sufficient mechanical reliability data supporting the use of lead free alloys. The current study was an effort to generate an understanding of the mechanisms of creep deformation in monolithic and composite (Ag and Cu reinforced) Sn–3.5Ag and Sn–3.0Ag–0.5Cu lead free alloys in the high stress high temperature regime. Small volume solder samples were reflowed using a custom built computer controlled resistance furnace. Impression creep testing was employed to determine the activation energy and stress exponent. A careful analysis of the collected data revealed the underlying creep mechanisms and the following conclusions could be made. Both Sn–3.5Ag and Sn–3.0Ag–0.5Cu exhibited higher creep resistance as compared to the eutectic tin–lead solder under all tested conditions, with the ternary lead free alloy marginally outperforming the binary lead free alloy. Composite solders performed better as compared to monolithic solders. Furthermore, Cu reinforced solders demonstrated higher creep resistance as compared to Ag reinforced solders.     

Influence of elastic constants on mode I stress-intensity factors in three-dimensional crack problems

Plates with V-through edge notches subjected to pure bending and specimens with rectangular edge-through-notches subjected to combined bending and axial pull were investigated (under live-load and stress-frozen conditions) in a completely nondestructive manner using scattered-light photoelasticity. Stress-intensity factors (SIFs) were evaluated by analysing the singular stress distributions near crack-tips. Improved methods are suggested for the evaluation of SIFs. The thickness-wise variation of SIFs is also obtained in the investigation. The results obtained are compared with the available theoretical solutions.     

A waveguide-based acoustic microscope

A new instrument is presented which is capable of high resolution acoustic imaging at relatively low frequencies. This approach results in increased complexity of the signal processing required and reduced throughput of the instrument. However, these disadvantages are amply compensated by the ability to create velocity scan images of materials with either high attenuation or low material velocities. These measurements are not possible using traditional/acoustic microscopes. The initial performance of the new instrument is demonstrated using thin samples of shim materials to show that acceptable spatial resolution and highly accurate time delay measurements are possible. An application is then shown using the instrument to evaluate subchondral sclerosis in horse bones. It has been hypothesized that changes in the elastic modulus may be associated with fatigue-induced microdamage. The modulus change may further represent bone damage which precedes the development of microcracking. Thin samples are used to allow complementary microradiography to be performed on the bone slices. Because of the low material velocity, surface wave interference methods (so called V(z) curves) are not well suited for use in some bone samples. The thickness of the samples eliminates the potential for the samples to be evaluated using pulse-echo time delay measurements. The new instrument is thus unique in its ability to create velocity scans of these samples.     

Corrosion Condition Evaluation at Muddy Creek Bridge

Corrosion rates were measured at the exposed spots of rebars near three corners of Muddy Creek Bridge located in northern West Virginia using a 3LP device. Also, chloride contents of the concrete samples taken from the vicinity of the spots were analyzed using a wet chemical method that had been developed in this study. The average corrosion rate over the three spots was 4.66 mA/m2, which is in the range of corrosion damage possible in 10–15 years. The average chloride content of the concrete over the three spots was 703 parts per million (ppm), which is well above the threshold limit value of 260 ppm. Although the corrosion rate measurement method using a 3LP device is by manual operation, it is found to be reliable and effective, and, thus, recommended for future studies of this kind of research. The wet chemical method developed in this study is found to be effective.