Influence of melt stability on the crystallization of bis(4-aminophenoxy)benzene-oxydiphthalic anhydride based polyimides

Novel high performance semicrystalline polyimides, based on controlled molecular weight phthalic anhydride (PA) endcapped 1,4-bis(4-aminophenoxy)benzene (TPEQ diamine) and oxydiphthalic dianhydride (ODPA), were synthesized. They exhibited excellent thermal stability in nitrogen and air atmospheres as determined by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) for these polymers ranged from 225°C for the 10,000 M_n (10K) polymer, to 238°C for the 30,000 (30K) M_n material. The observed melting temperatures for all the polymers were ∼420°C. The crystallization behavior of these polymers showed a strong molecular weight dependence, as illustrated by the observation that the 10K and 12.5K polymers crystallized with relative ease, whereas the 15K, 20K, and 30K polymers showed little or no ability to undergo thermal recrystallization. The thermal stability of these polymers above T_m was investigated by studying the effect of time and temperature in the melt on the cold crystallization and melting of these polymers. Increased time and temperature in the melt resulted in lower crystallinity because of melt state degradation, such as crosslinking and branching, as evidenced by an increase in melt viscosity, which was more prominent for the higher molecular weight polymers.     

Pd-Decorated Tungsten as Pt-Free Bimetallic Catalysts for Hydrogen Oxidation Reaction in Alkaline Electrolyte

Developing Pt-free catalysts for hydrogen oxidation reaction (HOR) in alkaline solution is becoming a key challenge in the development of anion exchange membrane fuel cells and electrochemical reactors. Herein, we present the preparation, HOR activity, and stability of Pd-decorated tungsten (Pd-d-W) catalysts. The Pd-d-W catalysts were prepared by the chemically activated surface of tungsten nanoparticles by Pd ions. The resultant bimetallic catalysts consisted of crystalline phases of both Pd and W nanoparticles. The CO stripping voltammograms and H-desorption (H_des) peak potential of hydrogen desorption in Pd suggests that the enhancement of HOR catalytic activity observed in Pd-d-W catalyst can be ascribed to the modification of electronic property of Pd and availability of OH_ad near-surface Pd atoms.     

Self-Assembly and Neurotoxicity of β-Amyloid (21–40) Peptide Fragment: The Regulatory Role of GxxxG Motifs

The three GxxxG repeating motifs from the C-terminal region of β-amyloid (Aβ) peptide play a significant role in regulating the aggregation kinetics of the peptide. Mutation of these glycine residues to leucine greatly accelerates the fibrillation process but generates a varied toxicity profile. Using an array of biophysical techniques, we demonstrated the uniqueness of the composite glycine residues in these structural repeats. We used solvent relaxation NMR spectroscopy to investigate the role played by the surrounding water molecules in determining the corresponding aggregation pathway. Notably, the conformational changes induced by Gly³³ and Gly³⁷ mutations result in significantly decreased toxicity in a neuronal cell line. Our results indicate that G³³xxxG³⁷ is the primary motif responsible for Aβ neurotoxicity, hence providing a direct structure–function correlation. Targeting this motif, therefore, can be a promising strategy to prevent neuronal cell death associated with Alzheimer's and other related diseases, such as type II diabetes and Parkinson's.     

Vortex characteristics due to nozzle clogging in water caster mould: modelling and validation

In continuous slab casting, clogging in the submerged entry nozzle (SEN) ports leads to flow asymmetry and vortex formation in the mould. Knowledge of vortexing and its influence on product quality is fundamental for defect-free production. In this study, the interconnected effects of nozzle clogging and SEN submergence depth, variation on flow asymmetry and vortex characteristics in a 0.4 scale water caster have been characterised by CFD investigation and validated with experimental results from the authors’ previous work. Mean flow velocities at the sub-meniscus and near the port exit predicted by the computational model are compared with the time-averaged values of the impeller probe velocity measurements and found to be in reasonable agreement. Three different clogging conditions (0, 33 and 66% in the left port of the SEN) for SEN submergence depth of 60?mm are studied and the 66% clogging produced vortices having largest diameter, which is consistent with the experimental observations. The effects of SEN submergence depth on flow asymmetry and vortexing are investigated with three different conditions – 40, 60 and 80?mm. It is found that the shallow SEN submergence depth (40?mm) produces vortices of largest diameter and the flow is most stable for a SEN submergence depth of 60?mm among the three cases. Vortex bending towards the SEN as noticed in the experimental observations is also observed in the computational study. This work illustrates the possibility of capturing features of vortexing using validated CFD model.     

Open dumping site in Asian developing countries: a potential source of polychlorinated dibenz-p-dioxins and polychlorinated dibenzofurans

Open landfill dumping areas for municipal wastes in Asian developing countries have recently received particular attention with regard to environmental pollution problems. Because of the uncontrolled burning of solid wastes, elevated contamination by various toxic chemicals including dioxins and related compounds in these dumping sites has been anticipated. In this study, concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and coplanar polychlorinated biphenyls (PCBs) were determined in soils from dumping sites in the Philippines, Cambodia, India, and Vietnam. Residue concentrations of PCDD/Fs and coplanar PCBs in dumping site soils were apparently greater than those in soils collected in agricultural or urban areas far from dumping sites, suggesting that dumping sites are potential sources of PCDD/Fs and related compounds. Observed PCDD/F concentrations in soils from dumping sites in the Philippines and Cambodia were comparable or higher than those reported for dioxin-contaminated locations in the world (e.g., near the municipal waste incinerators and open landfill dumping sites). Homologue profiles of PCDD/Fs in dumping site soils from the Philippines and, to a lesser extent, from Cambodia and India reflected patterns of samples representing typical emissions, while profiles of agricultural or urban soils were similar to those of typical environmental sinks. This result suggests recent formation of PCDD/Fs in dumping site areas and that open dumping sites are a potential source of dioxins in Asian developing countries. Uncontrolled combustions of solid wastes by waste pickers, generation of methane gas, and low-temperature burning can be major factors for the formation of dioxins in dumping sites. Elevated fluxes of PCDD/Fs to soils in dumping sites were encountered in the Philippines, Cambodia, India, and Vietnam-Hanoi, and these levels were higher than those reported for other countries. Considerable loading rates of PCDD/Fs in the dumping sites of these countries were observed, ranging from 20 to 3900 mg/yr (0.12-35 mg TEQ/yr). PCDD/F concentrations in some soil samples from the Philippines, Cambodia, India, and Vietnam-Hanoi exceeded environmental guideline values, suggesting potential health effects on humans and wildlife living near these dumping sites. The estimated intakes of dioxins via soil ingestion and dermal exposure for children were higher than those for adults, suggesting greater risk of dioxin exposure for children in dumping sites. To our knowledge, this is the first comprehensive study on PCDD/Fs contamination in open dumping sites of Asian developing countries. On the basis of the result of this study, we have addressed a new environmental issue that open dumping sites are potential sources of PCDD/Fs and related compounds, and dioxin contamination in dumping sites may become a key environmental problem in developing countries.     

Effect of water deficit on yield and protein content in pearl millet grains

Seventy-two pearl millet genotypes were water stressed at panicle development and grain filling stages. Neither grain yields, yield components, protein percent nor total protein per unit area were affected by water deficit during panicle development but protein content per grain was increased. When plants were water stressed during grain filling, grain yield, grains per unit area and 1000 grain weight were reduced, but grain protein percentage increased. Total protein per unit area was reduced primarily due to lower grain yield. The protein content per grain was unaffected by stress, suggesting that the apparent increase in protein percentage is due to reduced carbohydrate accumulation under stress.     

Long‐term impact of nitrogen and potassium fertilizers on yield,soil nutrients and biochemical parameters of tea

A field experiment was conducted with tea cultivar UPASI‐9 over a period of 9 years to evaluate the long‐term effects of nitrogen (N) and potassium (K) fertilizers on yield, biochemical parameters, soil and leaf nutrient status. The yield increase was as high as 66% over the control for N application of 450 kg ha^?1 year^?1. Polyphenol and amino acid contents increased with increase in K application rate. Positive and significant correlation was found between nitrate reductase activity and the amino acid content of the tea shoots. While ammoniacal nitrogen in the soil was not affected by the application of fertilizer, ammonium acetate extractable K increased. The failure to apply fertilizer resulted in depletion of the organic matter status of the soil. Although increased rate of nitrogen application increased the overall yield of made tea (kg ha^?1 year^?1), the specific yield (kg kg^?1 N) declined. The soil tended to become acidic from frequent application of high doses of nitrogenous fertilizer. The leaf NK status was significantly influenced by the various treatments. Copyright © 2004 Society of Chemical Industry     

Production of okara and soy protein concentrates using membrane technology

Microfiltration (MF) membranes with pore sizes of 200 and 450 nm and ultrafiltration (UF) membranes with molecular weight cut off of 50, 100, and 500 kDa were assessed for their ability to eliminate nonprotein substances from okara protein extract in a laboratory cross-flow membrane system. Both MF and UF improved the protein content of okara extract to a similar extent from approximately 68% to approximately 81% owing to the presence of protein in the feed leading to the formation of dynamic layer controlling the performance rather than the actual pore size of membranes. Although normalized flux in MF-450 (117 LMH/MPa) was close to UF-500 (118 LMH/MPa), the latter was selected based on higher average flux (47 LMH) offering the advantage of reduced processing time. Membrane processing of soy extract improved the protein content from 62% to 85% much closer to the target value. However, the final protein content in okara (approximately 80%) did not reach the target value (90%) owing to the greater presence of soluble fibers that were retained by the membrane. Solubility curve of membrane okara protein concentrate (MOPC) showed lower solubility than soy protein concentrate and a commercial isolate in the entire pH range. However, water absorption and fat-binding capacities of MOPC were either superior or comparable while emulsifying properties were in accordance with its solubility. The results of this study showed that okara protein concentrate (80%) could be produced using membrane technology without loss of any true proteins, thus offering value addition to okara, hitherto underutilized. Practical Application: Okara, a byproduct obtained during processing soybean for soymilk, is either underutilized or unutilized in spite of the fact that its protein quality is as good as that of soy milk and tofu. Membrane-processed protein products have been shown to possess superior functional properties compared to conventionally produced protein products. However, the potential of membrane technology has not been exploited for the recovery of okara protein. Our study showed that protein content of okara extract could be improved from approximately 68% to approximately 81% without losing any true proteins in the process.     

蚕丝蛋白对魔芋葡甘聚糖结构与溶胶性能的影响

本文研究了蚕丝蛋白对魔芋葡甘聚糖(KGM)结构与溶胶性质的影响。通过溶胀平衡的数学分析方法,计算出偏摩尔自由能的变化,从而预测溶胀平衡参数。与此同时,利用红外光谱、扫描电镜和流变技术,分析了蚕丝蛋白-KGM复配体系的结构特征和流变性质。结果表明:蚕丝蛋白对KGM结构与溶胶性质有显著影响。随着蚕丝蛋白组分比例的增加,KGM分子内的氢键破坏程度增加,其凝胶的粘度及弹性模量下降,凝胶稳定性降低。