Microstructure coarsening during static annealing of 60Sn40Pb solder joints: II eutectic coarsening kinetics

The eutectic coarsening kinetics for 60Sn40Pb solder joints annealed at 50°C to 150° C was determined to be of the form

Ultrafast Responsive Non‐Volatile Flash Photomemory via Spatially Addressable Perovskite/Block Copolymer Composite Film

The exotic photophysical properties of organic–inorganic hybrid perovskite with long exciton lifetimes and small binding energy have appeared as promising front‐runners for next‐generation non‐volatile flash photomemory. However, the long photo‐programming time of photomemory limits its application on light‐fidelity (Li‐Fi), which requires high storage capacity and short programming times. Herein, the spatially addressable perovskite in polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO)/perovskite composite film as an photoactive floating gate is demonstrated to elucidate the effect of morphology on the photo‐responsive characteristics of photomemory. The chelation between lead ion and PEO segment promotes the anti‐solvent functionalities of the perovskite/PS‐b‐PEO composite film, thus allowing the solution‐processable poly(3‐hexylthiophene‐2,5‐diyl) (P3HT) to act as the active channel. Through manipulating the interfacial area between perovskite and P3HT, fast photo‐induced charge transfer rate of 0.056 ns^?1, high charge transfer efficiency of 89%, ON/OFF current ratio of 10⁴, and extremely low programming time of 5 ms can be achieved. This solution‐processable and fast photo‐programmable non‐volatile flash photomemory can trigger the practical application on Li‐Fi.     

Luminescence,charge mobility,and optical waveguiding of two-dimensional organic rubrene nanosheets: Comparison with one-dimensional nanorods

Intrinsic characteristics of organic and inorganic nanostructures depend on their physical dimensions (i.e., size and shape) and crystallinity. Here, we compared the nanoscale optical and electrical properties of organic rubrene one-dimensional (1-D) nanorods (NRs) and two-dimensional (2-D) nanosheets (NSs). From high-resolution laser confocal microscope photoluminescence (PL) measurements, the light-emission characteristics of 2-D rubrene NSs varied with the crystalline domain direction, indicating intrinsic PL anisotropy, which was distinguishable from 1-D rubrene single NRs, because of anisotropy π–π stacking molecular arrangements. We also observed the variation of charge carrier mobility depending on the measured directions (i.e., anisotropy of charge transport) in rubrene NS-based field-effect transistors. The optical waveguiding properties of rubrene nanostructures were strongly correlated to the dimensionality of materials and PL anisotropy.     

Deep Neural Architecture for Recovering Dropped Pronouns in Korean

Pronouns are frequently dropped in Korean sentences, especially in text messages in the mobile phone environment. Restoring dropped pronouns can be a beneficial preprocessing task for machine translation, information extraction, spoken dialog systems, and many other applications. In this work, we address the problem of dropped pronoun recovery by resolving two simultaneous subtasks: detecting zero-pronoun sentences and determining the type of dropped pronouns. The problems are statistically modeled by encoding the sentence and classifying types of dropped pronouns using a recurrent neural network (RNN) architecture. Various RNN-based encoding architectures were investigated, and the stacked RNN was shown to be the best model for Korean zero-pronoun recovery. The proposed method does not require any manual features to be implemented; nevertheless, it shows good performance.     

Thermo-Adaptive Block Copolymer Structural Color Electronics

Flexible electronics that enable the visualization of thermal energy have significant potential for various applications, such as thermal diagnosis, sensing and imaging, and displays. Thermo-adaptive flexible electronic devices based on thin 1D block copolymer (BCP) photonic crystal (PC) films with self-assembled periodic nanostructures are presented. By employing a thermo-responsive polymer/non-volatile hygroscopic ionic liquid (IL) blend on a BCP film, full visible structural colors (SCs) are developed because of the temperature-dependent expansion and contraction of one BCP domain via IL injection and release, respectively, as a function of temperature. Reversible SC control of the bi-layered BCP/IL polymer blend film from room temperature to 80 °C facilitates the development of various thermo-adaptive SC flexible electronic devices including pixel arrays of reflective-mode displays and capacitive sensing display. A flexible diagnostic thermal patch is demonstrated with the bi-layered BCP/IL polymer blend enabling the visualization of local heat sources from the human body to microelectronic circuits.     

Fluorinated Polyimide as a Novel High‐Voltage Binder for High‐Capacity Cathode of Lithium‐Ion Batteries

An increase in the energy density of lithium‐ion batteries has long been a competitive advantage for advanced wireless devices and long‐driving electric vehicles. Li‐rich layered oxide, xLi₂MnO₃?(1?x)LiMn_1?y?zNi_yCo_zO₂, is a promising high‐capacity cathode material for high‐energy batteries, whose capacity increases by increasing charge voltage to above 4.6 V versus Li. Li‐rich layered oxide cathode however suffers from a rapid capacity fade during the high‐voltage cycling because of instable cathode–electrolyte interface, and the occurrence of metal dissolution, particle cracking, and structural degradation, particularly, at elevated temperatures. Herein, this study reports the development of fluorinated polyimide as a novel high‐voltage binder, which mitigates the cathode degradation problems through superior binding ability to conventional polyvinylidenefluoride binder and the formation of robust surface structure at the cathode. A full‐cell consisting of fluorinated polyimide binder‐assisted Li‐rich layered oxide cathode and conventional electrolyte without any electrolyte additive exhibits significantly improved capacity retention to 89% at the 100th cycle and discharge capacity to 223–198 mA h g^?1 even under the harsh condition of 55 °C and high charge voltage of 4.7 V, in contrast to a rapid performance fade of the cathode coated with polyvinylidenefluoride binder.     

Polydopamine Encapsulation of Fluorescent Nanodiamonds for Biomedical Applications

Fluorescent nanodiamonds (FNDs) are promising bioimaging probes compared with other fluorescent nanomaterials such as quantum dots, dye‐doped nanoparticles, and metallic nanoclusters, due to their remarkable optical properties and excellent biocompatibility. Nevertheless, they are prone to aggregation in physiological salt solutions, and modifying their surface to conjugate biologically active agents remains challenging. Here, inspired by the adhesive protein of marine mussels, encapsulation of FNDs within a polydopamine (PDA) shell is demonstrated. These PDA surfaces are readily modified via Michael addition or Schiff base reactions with molecules presenting thiol or nitrogen derivatives. Modification of PDA shells by thiol terminated poly(ethylene glycol) (PEG‐SH) molecules to enhance colloidal stability and biocompatibility of FNDs is described. Their use as fluorescent probes for cell imaging is demonstrated; it is found that PEGylated FNDs are taken up by HeLa cells and mouse bone marrow‐derived dendritic cells and exhibit reduced nonspecific membrane adhesion. Furthermore, functionalization with biotin‐PEG‐SH is demonstrated and long‐term high‐resolution single‐molecule fluorescence based tracking measurements of FNDs tethered via streptavidin to individual biotinylated DNA molecules are performed. This robust polydopamine encapsulation and functionalization strategy presents a facile route to develop FNDs as multifunctional labels, drug delivery vehicles, and targeting agents for biomedical applications.     

Scheduling algorithm for real-time imprecise computations tominimise maximum weighted errors using the linear programmingmethod

An optimal scheduling algorithm for imprecise systems is presented. The proposed algorithm aims at minimising the maximum weighted errors. A novel property of the algorithm is that the errors are evenly distributed among scheduled tasks. The complexity of the proposed algorithm is O(N³) in the worst case, where N is the number of tasks     

Design and Architecture of Low‐Latency High‐Speed Turbo Decoders

In this paper, we propose and present implementation results of a high‐speed turbo decoding algorithm. The latency caused by (de)interleaving and iterative decoding in a conventional maximum a posteriori turbo decoder can be dramatically reduced with the proposed design. The source of the latency reduction is from the combination of the radix‐4, center to top, parallel decoding, and early‐stop algorithms. This reduced latency enables the use of the turbo decoder as a forward error correction scheme in real‐time wireless communication services. The proposed scheme results in a slight degradation in bit error rate performance for large block sizes because the effective interleaver size in a radix‐4 implementation is reduced to half, relative to the conventional method. To prove the latency reduction, we implemented the proposed scheme on a field‐programmable gate array and compared its decoding speed with that of a conventional decoder. The results show an improvement of at least five fold for a single iteration of turbo decoding.     

Bendable and Splitter-Integrated Optical Subassembly Based on a Flexible Optical Board

A bendable and splitter-integrated optical subassembly (OSA) is suggested as a short-distance board-to-board optical interconnection. This OSA was fabricated by simply packaging a vertical-cavity surface-emitting laser on a flexible optical board having an embedded 1 $times$ 8 optical splitter waveguide. Finally, we measured various optical characteristics of the OSA, including insertion, twist, and bending losses.