Design and analysis of reflectivity for Mylar-coated solar dish

Energy is the key driver of the economy but energy crisis is a problem for the present-day source of energy. The concentrated solar power systems make use of different reflector configurations to convert the solar energy into high-temperature heat energy. Parabolic dish system is considered as the best suitable system for achieving high temperature and so it is opted for the study. Here, a solar dish is designed with an open diameter of 1.8?m (which is 2.5?m² in area), and reflective film is being used to reflect the solar irradiance and concentrated it in the focal point. A receiver of 1?mm thickness and 10?cm diameter is used at the receiver end to measure the temperature of the focal point. The setup has made to attain a maximum temperature of 940°C and average temperature of 850°C in the focal point at clear sky in a sunny day.     

Numerical and experimental study of a shell and tube heat exchanger for different baffles

In the present work, the shell and tube heat exchanger (STHX) is designed based on The Tubular Exchanger Manufacturers Association standards with hot fluid (water) flowing on the shell side and cold fluid on the tube side. A comparison is made between the Nusselt number and friction factor obtained from numerical and experimental results of segmental baffles (SBs) and helical baffles (HB) with different baffle inclinations. The results show that SB provided a higher Colburn factor (j_s) when compared with HBs STHXs (20°, 30°, 40°, and 50°), but shell side pressure drop is lower for 40° HBs STHXs for the same shell side fluid flow rates.     

A new approach for improved identification of measurement bias

This work presents a technique that can completely and accurately identify measurement bias in cases where it is not possible to use the method of Rollins and Davis (1992, 1993) and where the method of Narasimhan and Mah (1987) fail to perform accurately. This technique makes use of information contained in the relationship between individual measurements and the corresponding nodal imbalance. The performance of this method is demonstrated on a problem from the literature that has been difficult for other methods to handle. In addition, this article discusses how the new technique can be used as a visual monitoring tool for identifying biased measured variables.     

Validity of sequential bootstrap for subcritical and critical branching processes

Sequential bootstrapping for branching processes with immigration is proposed. The asymptotic validity of a sequential bootstrap estimator of the offspring mean in is estabilished for all values of m ? (0, 1]. This result is to be constrasted with the standard (non-sequential)bootstrapping where the bootstrap estimator estimator has been shown to asymptotically invalid (see, Sriram (1992)).     

Enhanced Active Queue Management for Multi-hop Networks

Wireless networks play a very important role in today’s modern world, convincingly surpassing the wired infrastructure in terms of popularity. Hence, it is important to ensure that services which access wired networks should also be accessible using a wireless network without any performance degradation. One of the most common variants in wireless communications is the Wireless Mesh Network (WMNs). WMNs exploit multi-hop wireless communications between wireless access points. Hence, the effective bandwidth decreases as the number of hops increases in a WMN, thus increasing latency and resulting in reduced performance. This may be due to spatial contention, multipath fading, interference or inefficient queuing mechanisms etc. Here we take queuing mechanisms into consideration and study the QMMN algorithm (Queue Management for Multi-hop Networks) which tends to improve throughput, fairness and reduce global synchronization problems. Based on our study, we implement a modified version of the QMMN algorithm, otherwise called the Enhanced QMMN (EQMMN) algorithm. EQMMN can be considered an effective algorithm which solves the problem of fairness between flows (either responsive or unresponsive) and eventually improves TCP throughput at wireless access points. Our experimental results prove that EQMMN algorithms have better performance characteristics such as throughput (TCP) and fairness index compared to QMMN algorithms.     

Resource planning and bandwidth allocation in hybrid fiber–coax residential networks

The introduction of new high bandwidth services such as video-on-demand by cable operators will put a strain on existing resources. It is important for cable operators to know how many resources to commit to the network to satisfy customer demands. In this paper, we develop models of voice and video traffic to determine the effect of demand growth on hybrid fiber–coax networks. We obtain a set of guidelines that network operators can use to build out their networks in response to increased demand. We begin with one type of traffic and generalize to an arbitrary number of high-bandwidth constant bit rate (CBR) like services to obtain service blocking probabilities. We consider the effect of supporting variable bit rate (VBR) packet-switched traffic in addition to CBR services. These computations help us to determine how cable networks would function under various conditions (i.e., low, medium, and heavy loads). We also consider how the growth rate of the popularity of such services would change over time, and how this impacts network planning. Our findings will help cable operators estimate how much bandwidth they need to provision for a given traffic growth model and connection blocking requirement.     

Structure‐Guided Design of Thiazolidine Derivatives as Mycobacterium tuberculosis Pantothenate Synthetase Inhibitors

The pantothenate biosynthetic pathway is essential for the persistent growth and virulence of Mycobacterium tuberculosis (Mtb) and one of the enzymes in the pathway, pantothenate synthetase (PS, EC: 6.3.2.1), encoded by the panC gene, has become an appropriate target for new therapeutics to treat tuberculosis. Herein, we report nanomolar thiazolidine inhibitors of Mtb PS developed by a rational inhibitor design approach. The thiazolidine compounds were discovered by using energy‐based pharmacophore modelling and subsequent in vitro screening, which resulted in compounds with a half maximal inhibitory concentration (IC₅₀) value of (1.12±0.12) μM . These compounds were subsequently optimised by a combination of modelling and synthetic chemistry. Hit expansion of the lead by chemical synthesis led to an improved inhibitor with an IC₅₀ value of 350 nM and an Mtb minimum inhibitory concentration (MIC) of 1.55 μM . Some of these compounds also showed good activity against dormant Mtb cells.     

Elemental Analogues of Graphene: Silicene,Germanene, Stanene,and Phosphorene

The fascinating electronic and optoelectronic properties of free‐standing graphene has led to the exploration of alternative two‐dimensional materials that can be easily integrated with current generation of electronic technologies. In contrast to 2D oxide and dichalcogenides, elemental 2D analogues of graphene, which include monolayer silicon (silicene), are fast emerging as promising alternatives, with predictions of high degree of integration with existing technologies. This article reviews this emerging class of 2D elemental materials – silicene, germanene, stanene, and phosphorene – with emphasis on fundamental properties and synthesis techniques. The need for further investigations to establish controlled synthesis techniques and the viability of such elemental 2D materials is highlighted. Future prospects harnessing the ability to manipulate the electronic structure of these materials for nano‐ and opto‐electronic applications are identified.     

Stretchable and Tunable Microtectonic ZnO‐Based Sensors and Photonics

The concept of realizing electronic applications on elastically stretchable “skins” that conform to irregularly shaped surfaces is revolutionizing fundamental research into mechanics and materials that can enable high performance stretchable devices. The ability to operate electronic devices under various mechanically stressed states can provide a set of unique functionalities that are beyond the capabilities of conventional rigid electronics. Here, a distinctive microtectonic effect enabled oxygen‐deficient, nanopatterned zinc oxide (ZnO) thin films on an elastomeric substrate are introduced to realize large area, stretchable, transparent, and ultraportable sensors. The unique surface structures are exploited to create stretchable gas and ultraviolet light sensors, where the functional oxide itself is stretchable, both of which outperform their rigid counterparts under room temperature conditions. Nanoscale ZnO features are embedded in an elastomeric matrix function as tunable diffraction gratings, capable of sensing displacements with nanometre accuracy. These devices and the microtectonic oxide thin film approach show promise in enabling functional, transparent, and wearable electronics.