Hybrid DPWM implementation using coarse and fine programmable ADLL

In the paper we propose a novel architecture and implementation of 11-bit Digital Pulse Width Modulator (DPWM) circuit based on previously known building blocks. Linearized Class-AD Double-sided (LADD) algorithm has been used to calculate the DPWM signals of the 11-bit resolution hybrid DPWM for a Class-AD digital audio amplifier. Noise-shaping process is used to support high fidelity with practical values of time resolution. The proposed DPWM circuit is composed of 8-bit counter and Analog Delay Locked Loop (ADLL) using 4-bit tapped delay line. A dual ADLL employing coarse and fine programmable delay element is used to adjust the delay time of delay line and lock it to required time. The coarse- as well as fine-delay lines are implemented as a cascade of variable-delay elements based on shunt capacitor delay element or single-ended Schmitt trigger. The proposed 11-bit DPWM circuit, at a switching frequency of 352.8 kHz and clock generator frequency of 90.3 MHz allows us to attain SNR of 120 dB and THD of the output signal less than 0.1% within the audio baseband and modulation index M=0.95. Basic verification of circuit manufacturability and simulation results (Monte Carlo analysis) for real CMOS process are presented.     

Elastohydrodynamic lubrication and finite configuration changes in reciprocating elastomeric seals

A computational framework has been developed for a fully coupled analysis of elastohydrodynamic lubrication and finite deformations of elastomeric reciprocating seals in hydraulic actuators. The relevant formulation is provided, which consistently treats finite configuration changes of the seal modelled as a hyperelastic (Mooney-Rivlin) solid. The steady-state hydrodynamic lubrication is modelled using the classical Reynolds equation. Coupling of the solid and fluid parts is fully accounted for, including friction due to shear stresses in the lubricant film. Detailed results of finite element simulations are provided for two benchmark problems of O-ring and rectangular rod seals in a wide range of process parameters.     

Properties of pore structure of thin-layer external plasters under ageing in simulated environment

The basic and commonly used four types of thin-layer facade plasters on cement and silicate binders were subjected to 400 cycles of accelerated ageing in the simulate chamber. The main attention was focused on the character of pore structure evolution during of ageing process. To reach this objective, examinations of the microstructure by the mercury intrusion method and total porosity by the densitometry method were carried out in time per 100 cycles. During the study, the main emphasis was put on the open porosity and changes of dimensional groups of pores. On the ground of the hysteresis of the mercury pressure by mercury intrusion porosimetry testing, the presence of pores with capillary entrance was suggested. In view of this, the cylindrical and spherical model of porous structure has been defined. The contribution of capillary and spherical pores vary in time together with properties such as: average pore radius, length of cylindrical pores and their tortuosity. The changes of these values confirm that atmospherical ageing influences plasters’ binders in two zones. It appears on the one hand by the decrease of total porosity, length and diameter of capillaries but on the other hand by the increase of open porosity and the decrease of pores’ tortuosity. It indicates the tightening character of the inside pore structure of the examined plasters and at the same time it gives diverse effect in its external zone.     

Semi-empirical model of efficiency of wire electrical discharge machining of hard-to-machine materials

In this study, the efficiency of wire electrical discharge machining of hard-to-machine materials was investigated experimentally. Uncoated brass wire, 0.25 mm diameter, zinc oxide coated brass wire and brass CuZn20 coated brass CuZn50 wire were utilized in the conducted research. The following variables were chosen as important WEDM parameters: discharge time t_on, average working voltage U. The following properties of machined materials, such as: melting point T_t, electrical conductivity σ, thermal conductivity K, thermal expansion coefficient k, density ρ, heat capacity c_p, were selected to develop the semi-empirical model of volumetric efficiency of WEDM. The variation of the WEDM efficiency in cutting different materials and applying different wire electrodes and different process parameters was modelled semi-empirically by employing dimensional analysis.     

A method for fast simulation of multiple catastrophic faults in analogue circuits

The paper offers an efficient method for simulation of multiple catastrophic faults in linear AC circuits. The faulty elements are either open circuits or short circuits. The method exploits the well‐known Householder formula in matrix theory to find the node voltages deviations due to the perturbations of some circuit elements. The main achievement of the paper is a systematic method for performing the simulation of all combinations of the multiple catastrophic faults. The method includes two new procedures enabling us to find very efficiently the node impedance matrix of the nominal circuit and inverses of some matrices corresponding to different fault combinations. The procedures are the crucial point of this approach and make it very efficient. Consequently, the amount of the computing power needed to carry out all the simulations is significantly reduced. Numerical examples illustrating the proposed approach are provided. Copyright © 2008 John Wiley & Sons, Ltd.     

First experiences with the Polish Optical Internet

The paper describes the new development programme of the Polish information infrastructure. The programme, called in Polish PIONIER: (English—PIONEER) Polish Optical Internet, Advanced Applications, Services and Technologies for the Information Society, has been proposed to the Polish State Committee for Scientific Research and has been accepted. The aim of the programme is to create an advanced infrastructure together with tools, services and applications available to the entire scientific community and eventually to government and local administrations as well as society in general. Services and applications are expected to appear as selected pilot realizations in order to verify deployed technologies. Some of the pilot realizations and testbeds are also presented in the paper.     

Efficient computer implementation of the renormalized coupled-cluster methods: The R-CCSD[T], R-CCSD(T), CR-CCSD[T], and CR-CCSD(T) approaches

The recently proposed renormalized (R) and completely renormalized (CR) coupled-cluster (CC) methods of the CCSD[T] and CCSD(T) types have been implemented using recursively generated intermediates and fast matrix multiplication routines. The details of this implementation, including the complete set of equations that have been used in writing efficient computer codes, memory requirements, and typical CPU timings, are discussed. The R-CCSD[T], R-CCSD(T), CR-CCSD[T], and CR-CCSD(T) computer codes and similar codes for the standard CC methods, including the LCCD, CCD, CCSD, CCSD[T], and CCSD(T) approaches, have been incorporated into the gamess package. Information about the main features of this new set of CC programs is provided.     

On some properties of Goursat–Darboux systems with distributed and boundary controls

In this paper, a Goursat–Darboux control system is considered. In the first part, the bang-bang principle and some approximation results concerning the piecewise constant controls, for a linear system with distributed and boundary controls, are proved. In the second part, an approximation result concerning the bang-bang controls, for a special case of nonlinear (in a state) system with distributed controls, is derived.     

The thermodynamic stability of coupled heat and mass transfer described by linear wave equations

Applying Liapounov's direct method it was shown that the distributed steady states, approached by the solutions of the non-Fourier (wave) equations of energy and mass transfer, are always stable if the well-known classical thermodynamics criterion of stability-the negativity of thermostatic matrix C, is met. The assumptions associated with the simplest structure of the wave equations are revealed on the basis of the thermodynamic stability analysis.