A numerical investigation on the geometry dependence of the crack growth resistance in CT specimens

The influence of the specimen thickness B and the ligament length b on the J _R -curves is numerically investigated for CT specimens. The thickness effect is taken into account with 2-D analyses by dividing a plain sided specimen into a plane stress part and a plane strain part. The fracture process is controlled by experimentally determined critical values of the crack tip opening displacement for crack growth initiation (CTOD_i) and the crack tip opening angle for stable crack growth (CTOA_C). It is shown that for the global behaviour of a plain sided specimen, the B/b ratio is essential. The difference between the geometry dependence of the initiation value of the J-integral and the geometry dependence of the slope of the J _R -curves is also shown.     

美欧清洗工艺之比较

清洗技术受到全球和地区相关行业上下游技术的影响,并随其不断发展.清洗技术因地而异,不同国家和地区之间的清洗工艺存在一定差别,而这些差别主要是由地方市场因素和法律因素决定的. 　　……     

Credibility and applicability of virtual reality models in design and construction

In this paper, we present the findings from an extensive study of the use of virtual reality (VR) models in large construction projects. The study includes two parts: The first part presents a quantitative questionnaire designed to investigate how VR models are experienced and assessed by the workforce at a building site. The second part includes a qualitative field survey of how VR models can be applied and accepted by professionals in the design and planning process of a large pelletizing plant. Through mainly studying persons who had little or no experience with advanced information technology (IT), we hoped to reveal the attitudes of the average person working at a construction site rather than of an IT expert. In summary, the study shows that the VR models in both projects have been very useful and well accepted by the users. Today’s information flow is, from a general point of view, considered to be insufficient and the hypothesis is that using VR models in the construction process have the potential to minimize waste of resources and improve the final result.     

Near-wall porosity characteristics of fixed beds packed with wood chips

Packed beds of fuel wood chips are commonly found in thermal conversion processes such as combustion or gasification. Wood chips in particular are mostly used as fuel for small-scale domestic heating boilers but also for commercial-scale combustion units. The characterization of spatial voidage distribution inside the wood chip beds is of great importance for flow and reactor modelling. This study focuses on the radial porosity variations of cylindrical beds of three different types of commercially available wood chips including chips classified as G30 size class. The conventional technique of consolidating packed beds with a resin was chosen as the experimental procedure. The radial voidage distribution in different cylindrical beds is determined by image analysis of sections of the solidified packings. Additionally, a packing of monosized spheres was investigated in order to assess the selected procedure in comparison with widely available literature data for spheres. The results are discussed and summarized in a mathematical expression correlating the radial voidage distribution depending on average wood chip size, packing core porosity and dimensionless distance from the tube wall.     

Zum Einfluß extrazellulärer polymerer Substanzen bei der mikrobiologisch beeinflußten Korrosion

The influence of extra-cellular polymeric substances in microbiologically influenced corrosion Unexpected pitting failures in copper potable water installations have occurred in some countries (Germany, Sweden, Scotland, South-West England, Saudi-Arabia) in the mid-eighties. These failures could not be expected in a single case based on the chemical composition of the potable water. Further typical manifestation characteristics of this microbiologically influenced corrosion have been i.) an uptake of dissolved and undissolved copper species in an obsolete, non regular fashion, ii.) black layers of copper(II)-oxide on the inner tube surface, accompanied by posniakite and malachite in the pitting areas, and, iii.) the detection of extracellular polymeric substances (EPS). These EPS consist partly of polysaccharides. They could either be produced by microorganisms within the potable water installation or be transported in a dissolved or undissolved state into the installation. Consequently, they sediment on the inner surfaces of the copper tubes. The physico-chemical properties of some kinds of EPS, especially their membrane properties and their cation selectivity, play a key role in this corrosion process. This is shown exemplarily performing diffusion potential measurements and contact corrosion experiments.     

Evaluation of different coating systems by electrochemical methods

Corrosion protection of organic coated steel is determined by free corrosion potential measurements and impedance spectroscopy. The results are classified by means of very basic considerations and evaluation figures are developed. These electrochemical data are correlated with the extent of the corrosion for each coating system. The evaluation figures are used for ranking coating systems and this ranking is correlated with the ranking with reference to the results of standardized and exposure tests.