Design of Engineered Elastomeric Substrate for Stretchable Active Devices and Sensors

In the field of flexible electronics, emerging applications require biocompatible and unobtrusive devices, which can withstand different modes of mechanical deformation and achieve low complexity in the fabrication process. Here, the fabrication of a mesa‐shaped elastomeric substrate, supporting thin‐film transistors (TFTs) and logic circuits (inverters), is reported. High‐relief structures are designed to minimize the strain experienced by the electronics, which are fabricated directly on the pillars' surface. In this design configuration, devices based on amorphous indium‐gallium‐zinc‐oxide can withstand different modes of deformation. Bending, stretching, and twisting experiments up to 6 mm radius, 20% uniaxial strain, and 180° global twisting, respectively, are performed to show stable electrical performance of the TFTs. Similarly, a fully integrated digital inverter is tested while stretched up to 20% elongation. As a proof of the versatility of mesa‐shaped geometry, a biocompatible and stretchable sensor for temperature mapping is also realized. Using pectin, which is a temperature‐sensitive material present in plant cells, the response of the sensor shows current modulation from 13 to 28 °C and functionality up to 15% strain. These results demonstrate the performance of highly flexible electronics for a broad variety of applications, including smart skin and health monitoring.     

A simulation model for settling tanks with varying cross-sectional area

A quasi-one-dimensional model of the process of continuous sedimentation in clarifier-thickeners (settlers) with variable cross-sectional area is presented. The partial differential equation (PDE) model extends the settler model advanced by Bürger et al. (2013 Bürger, R., Diehl, S., Farås, S., Nopens, I., and Torfs, E. (2013). A consistent modelling methodology for secondary settling tanks: A reliable numerical method, Water Sci. Technol. 68(1), 192–208.[Crossref], [PubMed], [Web of Science ®] , [Google Scholar]), which assumes a constant cross section. A reliable numerical method that handles the special features of the nonlinear PDE is presented along with an advantageous time-step condition for continuous and batch sedimentation under the condition of a variable cross-sectional area. Simulations of continuous sedimentation show the effect of change of cross-sectional area in the concentration inside the vessel and in the underflow. Simulations of batch settling in cones illustrate the versatility of the numerical scheme to include a vertex, where the area shrinks to zero.     

Toroidal Protein Adaptor Assembles Ferrimagnetic Nanoparticle Fibers with Constructive Magnetic Coupling

Inspired by nature, the synthesis of biohybrid nanocomposites containing inorganic nanoparticles (NPs) and biopolymers such as DNA and peptides as templates offers great potential for a wide range of applications. Using selective recognition schemes of 3D protein spaces for the assembly of magnetic nanocrystals is a challenge with great promise in the field of biomedicine and magnetic data storage. Here we apply the toroidal protein Hcp1 as an interparticle connector for the directed molecular assembly and ferrimagnetic coupling of biohybrid cobalt ferrite NP wires. The resulting biohybrid NP composites show bundles of nanofibers ranging from nano‐ to the microscale in length verified by TEM, EDX analysis and focused ion beam cut. Their magnetic characterization reveals an increase of the coercive field (+12%) reaching values of high‐end Nd₂Fe₁₄B bulk magnets, enhanced saturation (+28%) and remanence magnetization (+38%) at 2 K compared to NPs lacking the protein connector. Thus, the combination of the nanoscale alignment of magnetic NPs with the molecular precision of the protein connectors leads to constructive addition of the magnetization reversal energy. This approach can be used to control magnetic properties for the design of materials with enhanced coercivity applicable for magnetic data storage, hyperthermia and theranostics.     

The solids-flux theory--confirmation and extension by using partial differential equations

The solids-flux theory has been used for half a century as a tool for estimating concentration and fluxes in the design and operation of secondary settling tanks during stationary conditions. The flux theory means that the conservation of mass is used in one dimension together with the batch-settling flux function according to the Kynch assumption. The flux theory results correspond to stationary solutions of a partial differential equation, a conservation law, with discontinuous coefficients modelling the continuous-sedimentation process in one dimension. The mathematical analysis of such an equation is intricate, partly since it cannot be interpreted in the classical sense. Recent results, however, make it possible to partly confirm and extend the previous flux theory statements, partly draw new conclusions also on the dynamic behaviour and the possibilities and limitations for control. We use here a single example of an ideal settling tank and a given batch-settling flux in a whole series of calculations. The mathematical results are adapted towards the application and many of them are conveniently presented in terms of operating charts.     

p-Nitrophenol removal by combination of powdered activated carbon adsorption and ultrafiltration - comparison of different operational modes

Ultrafiltration is classified as a low-pressure membrane technology which effectively removes particulate matter and microorganisms and to a certain extent dissolved organic matter (15-25%) and colour. The technology has been optimized and is becoming competitive compared to conventional processes for larger scale plant capacities. In combination with activated carbon it is an effective barrier regarding the removal of synthetic organic chemicals. Growing interest in ultrafiltration raises the question of better usage of the adsorption capacity of powdered activated carbon (PAC) used in combination with this low-pressure membrane technique. This paper presents a pilot plant study of different PAC dosing procedures within a combined hybrid membrane IN/OUT process for removal of p-nitrophenol (PNP) from water (c(0)=1mg/L) under real case conditions (e.g. usage of the same module for the whole duration of the experiment, backwashing with permeate water, no separate saturation of the membrane with substance without presence of carbon). p-Nitrophenol was chosen as an appropriate test substance to assess the efficiency of different operation modes. Dead-end and cross-flow filtration were compared with respect to different PAC dosing procedures: continuous dosing into a continuously stirred tank reactor (CSTR) in front of the module and direct dosing into the pipe in front of the module (continuous, single-pulse and multi-pulse dosing). There was no advantage in cross-flow mode over dead-end referring to PNP concentration in the permeate. Relating to the carbon dosing procedure, the best results were obtained for continuous PAC addition. The option of dosing directly into the pipe has the advantage of no additional tank being necessary. In the case of single-pulse dosing, the formation of a carbon layer on the membrane surface was assumed and an LDF model applied for a simplified estimation of the "breakthrough behaviour" in the thus formed "PAC filter layer".     

Stress responses investigated; application of zinc and heat to Terrestrial Model Ecosystems from heavy metal polluted grassland

This study tested the hypothesis that soils with a deprived biodiversity due to metal pollution are less stable than non-polluted soils, containing a more diverse community. For this, soils were sampled from specific grasslands in the Netherlands that contain elevated heavy metal concentrations (Cu, Pb and Zn). Soils that showed the largest differences in metal concentrations were incubated in the laboratory using Terrestrial Model Ecosystems (TMEs). This approach enabled simultaneous measurement of structural (bacteria, nematodes, enchytraeids, earthworms) and functional parameters (nitrogen leaching, feeding activity, CO₂ production, plant growth). The highest polluted soils showed a lower bacterial growth, and decreased enchytraeid and nematode biomass and diversity, hence a deprived community. More nitrate leached from high polluted soils, while all other functional endpoints did not differ. Additional stress application of zinc and heat was used to test the stability. Zinc treatment caused effects only in the higher polluted soils, observed at several moments in time for enchytraeids, CO₂ fluxes and plant growth. Heat stress caused a large reduction in enchytraeid and earthworm biomass. Ammonium leaching was decreased by heat treatments in the most polluted soils, while CO₂ was increased by heat in less polluted soils. Most effects were seen in the most polluted systems and it was concluded that they seem less stable.     

外墙外保温面层体系用防水抗裂砂浆性能实验研究

通过测试外墙外保温面层体系防水抗裂砂浆的工作性、吸水率、力学性能和耐久性能,综合评价了掺不同防水剂后防水抗裂砂浆的防水性能,并推荐有效的有机硅防水剂品种,为实际工程提供借鉴.     

Regulation through comparative performance evaluation

Ofwat used comparative performance regulation in the 1994 periodic review of prices. We consider such a regulatory mechanism when there are technological spillovers. The regulator cannot observe firms effort and must design a regulatory contract which induces the socially optimal level of cost reduction. The extent to which cost reducing activities are non-appropriable is shown to affect the optimal choice of regulation. In general, comparative performance regulation is optimal and yardstick competition emerges only as a special case. However, when spillovers are spread evenly across an industry, an optimal comparative regime does not exist.     

Mobilisation of heavy metals by deicing salts in a roadside environment

The seasonal variations of some selected heavy metals (Cd, Cu, Pb and Zn) and principal anions in soil solutions were monitored as a function of distance from the road at two field sites in Sweden. During the winter, the conductivity, concentrations of dissolved sodium and chloride increased dramatically due to the application of deicing agents (i.e. NaCl). Due to ion exchange, the pH decreased one unit in the soil solutions, whereas the concentrations of total organic carbon decreased due to coagulation and/or sorption to stationary solids. The heavy metal concentrations increased during the winter, but through different mechanisms. Cadmium concentrations in the aqueous phase increased as a response to ion exchange, possibly also enhanced by the formation of chloride complexes. Similarly, the concentrations of zinc increased, due to ion exchange, with calcium and protons. The mechanisms of mobilisation for copper and lead were not that clear probably due to association with coagulated or sorbed organic matter in combination with colloid dispersion.